Download EXPLORER 5075GX Auto-Deploy Antenna System

Description of the system components
2.2.7
LAN ports and WLAN
The electronics enclosure has four LAN connectors (type RJ45) for connecting a PC/lap top
or similar:
• LAN connector on the left-hand side (LAN 1) is used for system control via the web
interface.
• Three connectors (LAN 2 to LAN 4) for user ports for Internet etc., configured by the GX
modem.
The EXPLORER 5075GX has a WLAN module. Access to one of the LAN ports using WLAN
must be set up in the web interface, see To configure the LAN network on page 4-6.
2.2.8
Power Supply
The power adaptor supplies primary power to the electronics enclosure, antenna positioner,
and the BUC. Power input is specified as follows: 100-240 VAC, 4A, 50/60 Hz.
2-6
Chapter 2: Introduction
98-143492-B