Download Preface

HFC1048
series trucks
Being used, the vehicle will often be
fuel-gauge still motionless, it means
broke along with it travels longer and
the fuel-gauge to break down.
longer. In order to recover vehicle to
The hydraulic indicator isn't bright:
normal proper situation, also to pro鄄
Dismantle hydraulic -pneumatic alert
long its life, the trouble must been
machine bottom, and take it iron. If
find out and then been disposed in
the hydraulic -pneumatic indicator is
an effective way.
bright at this time, the elucidation is
* To shoot troubles of engine, see
hydraulic -pneumatic to report the
Engine Operating Instruction Manual
machine switch damage, should re鄄
which every vehicle have been e鄄
place. If still not bright, explain the
quipped.
index sign lamp bulb burn bad,
Checking and remedy of electri鄄
cal system
fuel gauge not move
Spread fuel-gauge and take it iron, if
the fuel -gauge needle point toward
fuel-gauge have already break down
or the instrument fuse was burn out,
should check to fix or replace. If the
66
1援Electrical parts trouble shooting
Trouble symptom and probable cause
Checking and remedy
(1)Not start
(a)Incorrect connection
(d) Clean the battery
(b)Barry output Incorrect connection
(b) Clean and tight it
(c)Lubricant is not the standard.
(c) replace lubricant
(d)Start the relay is incorrect.
(d) repair and replace
should replace, perhaps is launch
the engine oil road contain break鄄
down.
Dynamo is not work
Dynamo is work well, but indicator
light is not work.The main cause of
lamp connection is not well.
(2)Insufficient electric capacity
(a) New battery without circulation of charge and dis鄄 (a)Charge as specified
charge, or not been charged to rated quantity.
(b) Generator without charge or enough charge.
(b)Check connections and repair
(c) Damaged pole plate.
(c) Check and repair
(d) Low level or improper specific gravity of electrolyte
(d)Fill up electrolyte and charge battery with it separated
from vehicle
67