Download Rev 5

CONFigure
:CQM
:LOAD
OPEN or <numeric_value>
:COHMs <numeric_value>
Open circuit or 0-500 (ohms)
Range 0-500, sets the amount
to change the CQM
resistance when the ohms
UP/Down buttons are used
Same as pressing Change by
Ohms Up button
Same as pressing Change by
Ohms Down button
:UP
:DOWN
:POHMs <numeric_value>
Range 0-500, sets the amount
to change the CQM
resistance when the percent
UP/Down buttons are used
Same as pressing Change by
Percent Up button
Same as pressing Change by
Percent Down button
:UP
:DOWN
:HOLD
:MODE
ON | OFF
MAIN | RFMeasure | RFLeakage | CQM | LCURve | ASEQuence | SYStools
SYSTem Subsystem
This group allows the user to setup the startup mode for the unit, as well as directly
control the unit, as if pressing the keys on the front panel.
KEYWORD
PARAMETER FORM
SYSTem
:VERsion?
Read Only
Range 0 – 10
VOLume
:AVERaging
COMMENTS
:FAST
:MEDium
:SLOW
:WINdow
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
Range 1-200 (samples)
Range 1-200 (samples)
Range 1-200 (samples)
Range 0.0 to 100.0 (mV)
128