Download B8-1

B8-138
13-16-2 SPECIFIED VALUE FOR INPUT/ OUTPUT SIGNAL
Checking system
Terminal
Measuring conditions
27(B1)  130(E1)
When the ignition switch is set to "ON".
Power supply
Reference value
Battery voltage
38(BAT)  130(E1)
At all times
101(VCPM)  64(E2PM)
When the ignition switch is set to "ON".
4.75 to 5.25V
When the ignition switch is set to "ON"
(atmospheric pressure).
3.1 to 4.1V
After the engine is started.
Changes according to the
opening of the accelerator
When the ignition switch is set to "ON".
4.75 to 5.25V
When the throttle valve is fully closed.
0.4 to 0.8V
When the throttle valve is fully open.
3.2 to 5.0V
98(THW)  131(E2)
When warm (60 to 120 coolant temperature)
0.3 to 1.3V
65(THA)  131(E2)
When warm
0.5 to 4.3V
Knock sensor
132(KNK)  131(E2)
When the engine is idling and when racing the engine.
Pulse generated
Engine speed sensor
63(N1)  100(N1)
When the engine is idling.
Pulse generated
Camshaft position sensor
97(N2)  129(N2)
When the engine is idling.
Pulse generated
Front oxygen sensor
22(OX1)  131(E2)
After maintaining the engine speed at
3000 rpm for 4 minutes
Changes between 0.2 to 1.0V
Front oxygen sensor
heater
60(OXH1)  131(E2)
When the engine is idling.
3.0 or less
When the ignition switch is set to "ON".
Battery voltage
Rear oxygen sensor
51(OX3)  131(E2)
Manifold pressure sensor
102(PIM)  64(E2PM)
62(VC)  131(E2)
Throttle position sensor
99(VTH)  131(E2)
Coolant temperature
sensor
Intake air temperature
sensor
26(#10)  130(E1)
25(#20)  130(E1)
Injector system
24(#30)  130(E1)
18(#40)  130(E1)
69(IG1)  130(E1)
106(IG2)  130(E1)
Ignition system
135(IG3)  130(E1)
68(IG4)  130(E1)
After maintaining the engine speed at
3000 rpm for 4 minutes
When the ignition switch is set to "ON".
When the engine is idling.
When the ignition switch is set to "ON".
When the engine is idling.
When the ignition switch is set to "ON".
When the engine is idling.
When the ignition switch is set to "ON".
When the engine is idling.
When the ignition switch is set to "ON".
When the engine is idling.
When the ignition switch is set to "ON".
When the engine is idling.
When the ignition switch is set to "ON".
When the engine is idling.
When the ignition switch is set to "ON".
When the engine is idling.
Changes between 0.2 to 1.0V
Battery voltage
Pulse generated
Battery voltage
Pulse generated
Battery voltage
Pulse generated
Battery voltage
Pulse generated
0 to 0.11V
Pulse generated
0 to 0.11V
Pulse generated
0 to 0.11V
Pulse generated
0 to 0.11V
Pulse generated