Download Manual Permobil C300

Owner’s Manual Permobil C300
Handling
Manual Handling of the Magnetic Wheel Locks
The wheel locks can be released in
order to make it possible to move the
wheelchair manually.
Release the wheel locks
1. Shut off the wheelchair using the
start button on the control panel.
2. Press the release lever backwards,
and pull it out from the chassis at the
same time, see the picture. The chair
can now be moved manually.
Engage the wheel locks
Push the release lever into the chassis,
see fig.

Location of the release lever.
WARNING
Do not engage or disengage wheel locks unless
power to the chair is off.
In order to avoid the wheelchair rolling away,
ensure that the wheelchair is on a level and dry
base before releasing the wheel locks.
Release the wheel locks
Be aware that the chair will not have brakes
when wheel locks are in the free-wheel position.
Make sure that the person pushing the chair
has full control when wheel locks are disengaged.
Always reset the wheel lock release after
manually moving the wheelchair.

NOTE
When the wheel locks are released, the chair
will not drive. If it does, contact your Permobil
serviceman as soon as possible.
Engage the wheel locks
49