Download GreensmasterR Flex 18/21

Special Tools
Order special tools from the TORO SPECIAL TOOLS
AND APPLICATIONS GUIDE (COMMERCIAL PRODUCTS).
Some tools may also be available from a local supplier.
Multimeter
The multimeter can test electrical components and circuits for current, resistance or voltage.
NOTE: Toro recommends the use of a DIGITAL Volt–
Ohm–Amp multimeter when testing electrical circuits.
The high impedance (internal resistance) of a digital meter in the voltage mode will make sure that excess current is not allowed through the meter. This excess
current can cause damage to circuits not designed to
carry it.
Figure 1
Skin–Over Grease
Electrical
System
Toro Part Number: 505–165
Special non–conductive grease which forms a light protective skin to help waterproof electrical switches and
contacts.
Figure 2
Dielectric Gel
Toro Part Number: 107–0342
Dielectric gel should be used to prevent corrosion of
connection terminals. To ensure complete coating of terminals, liberally apply gel to both component and wire
harness connector, plug connector to component, unplug connector, reapply gel to both surfaces and reconnect harness connector to component. Connectors
should be thoroughly packed with gel for effective results.
Figure 3
Greensmaster Flex 18/21
Page 5 – 3
Electrical System