Download HCD-GP5

HCD-GP5
SERVICE MANUAL
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Ver 1.5 2004.10
HCD-GP5 is the Amplifier, CD player, Tape
Deck and Tuner section in CMT-GP5.
CD
Section
TAPE
Section
Model Name Using Similar Mechanism
NEW
CD Mechanism Type
CDM55A-K6BD44B
Base Unit Name
BU-K1BD44B
Optical Pick-up Name
KSM-213D
Model Name Using Similar Mechanism
NEW
Tape Transport Mechanism Type
CMAL1Z240A
SPECIFICATIONS
Amplifier section
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm loads, both channels driven, from 120 10,000 Hz; rated 35 watts per channel minimum RMS
power, with no more than 10% total harmonic
distortion from 250 milliwatts to rated output.
North American model:
Continuous RMS power output (reference):
35 + 35 W
(6 ohms at 1 kHz, 10%
THD)
European model:
DIN power output (rated): 30 + 30 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
30 + 30 W
(6 ohms at 1 kHz, 10%
THD)
Music power output (reference):
60 + 60 W
Other models:
The following measured at AC 230 V or AC 120 V, 50/
60 Hz
DIN power output (rated): 30 + 30 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
30 + 30 W
(6 ohms at 1 kHz, 10%
THD)
Inputs
MD IN (phono jacks):
Tuning range
Sensitivity 500 mV,
impedance 47 kilohms
Outputs
PHONES (stereo minijack):
Accepts headphones with
an impedance of 8 ohms or
more
SPEAKERS:
Accepts impedance of 6 to
16 ohms.
CD player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Tape deck section
Recording system
Frequency response
4-track 2-channel stereo
50 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassettes
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
Pan-American model:
European model:
Other models:
Antenna
Intermediate frequency
87.5 – 108.0 MHz (50-kHz
step)
FM lead antenna
75 ohms balanced
10.7 MHz
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,710 kHz
(with the tuning interval
set at 9 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
AM loop antenna, external
antenna terminal
450 kHz
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
— Continued on next page —
MICRO HI-FI COMPONENT SYSTEM
9-877-380-06
Sony Corporation
2004J16-1
© 2004.10
Personal Audio Company
Published by Sony Engineering Corporation
HCD-GP5
Ver 1.3 2004.01
TABLE OF CONTENTS
General
Power requirements
North American model:
European model:
Australian model:
Hong Kong model:
Singaporean model:
Other models:
Power consumption
North American model:
European model:
Other models:
Dimensions (w/h/d)
Mass
1. SERVICING NOTES ······················································· 3
120 V AC, 60 Hz
230 V AC, 50/60 Hz
230 - 240 V AC, 50/60 Hz
220 - 240 V AC, 50/60 Hz
220 - 240 V AC, 50/60 Hz
110 - 120 V or 220 - 240 V
AC, 50/60 Hz
Adjustable with voltage
selector
60 watts
60 watts
0.3 watts (in the standby
mode)
60 watts
Approx. 190 × 250 × 270
mm
Approx. 4.6 kg
Design and specifications are subject to change
without notice.
2. GENERAL ·········································································· 5
3. DISASSEMBLY
3-1. Top Cabinet, Rear Panel ·················································· 7
3-2. Front Panel Assy ····························································· 8
3-3. CONTROL Board, Single Cassette Mechanism ············· 8
3-4. CD Mechanism Deck (CDM55A-K6BD44B) ················ 9
3-5. MAIN Board, TRANSFORMER Board ······················· 10
3-6. LOADING Board ·························································· 10
3-7. CD Board ······································································ 11
3-8. Tray (CDM55D) ··························································· 11
3-9. Optical Pick-up (KSM-213D), Holder (C213) ············· 12
4. MECHANICAL ADJUSTMENTS ····························· 13
5. ELECTRICAL ADJUSTMENTS ······························· 14
6. DIAGRAMS ······································································ 17
6-1. Block Diagram ······························································ 19
6-2. Printed Wiring Board – CD Section – ························· 20
6-3. Schematic Diagram – CD Section – ···························· 21
6-4. Printed Wiring Board – Control Section – ··················· 22
6-5. Schematic Diagram – Control Section – ······················ 23
6-6. Printed Wiring Boards – Main Section – ····················· 24
6-7. Schematic Diagram – Main Section (1/4) – ················· 25
6-8. Schematic Diagram – Main Section (2/4) – ················· 26
6-9. Schematic Diagram – Main Section (3/4) – ················· 27
6-10. Schematic Diagram – Main Section (4/4) – ··············· 28
6-11. Printed Wiring Board – Power Section – ··················· 29
6-12. Schematic Diagram – Power Section – ······················ 30
6-13. IC Pin Function Description ······································· 35
7. EXPLODED VIEWS
7-1. Overall Section ····························································· 37
7-2. Front Panel Section ······················································· 38
7-3. Chassis Section ····························································· 39
7-4. CD Mechanism Deck Setion ········································· 40
7-5. KSM-213D ···································································· 41
8. ELECTRICAL PARTS LIST ······································· 42
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
2
HCD-GP5
SECTION 1
SERVICING NOTES
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be damaged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C during
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering or
unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, screws,
and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a VOM
or battery-operated AC voltmeter. The “limit” indication is 0.75
V, so analog meters must have an accurate low-voltage scale.
The Simpson 250 and Sanwa SH-63Trd are examples of a
passive VOM that is suitable. Nearly all battery operated digital
multimeters that have a 2 V AC range are suitable. (See Fig. A)
To Exposed Metal
Parts on Set
0.15 µF
1.5 k Ω
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
This appliance is classified as a CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT MARKING is located on
the exterior.
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
Carry out the “S curve check” in “CD section adjustment” and check
that the S curve waveforms is output three times.
AC
voltmeter
(0.75 V)
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
3
HCD-GP5
Service Position of the CD Mechanism Deck
MAIN Board
CD Mechanism Deck
(CDM55A-K6BD44B)
Service Position of the Tape Cassette Mechanism Deck
MAIN Board
Tape Cassette Mechanism Deck
(CMAL1Z240A)
4
HCD-GP5
SECTION 2
GENERAL
This section is extracted
from instruction manual.
List of button locations and reference pages
How to use this page
Illustration number
r
Use this page to find the location of buttons and other
parts of the system that are mentioned in the text.
DISPLAY 8 (9, 10, 16)
R
Name of button/part
R
Reference page
Main unit
BUTTON DESCRIPTIONS
ALPHABETICAL ORDER
A–M
P–Z
Cassette compartment qg
CD SYNC qd (12)
DIRECTION 9 (11, 12, 15)
Disc tray 4
DISPLAY 8 (9, 10, 16)
Display window 3
DSG qa (13)
MD qj (17)
PHONES jack qh
PLAY MODE/TUNING MODE
9 (6, 7)
Remote sensor 2
TUNER/BAND qj (8, 9)
TUNING +/– 6 (8, 9)
VOLUME +/– 7 (14, 15)
1
2
3
4
?/1 (power) 1 (5, 9, 14, 15)
.m/M> (go back/go
forward or fast forward/
rewind) 6 (5, 6, 7, 11, 12, 14,
15, 16)
x (stop) qs (6, 7, 11, 12, 20)
REC PAUSE/START z qf (12,
15)
CD NX (play/pause) qk (6, 7)
TAPE nN (play) qk (11, 12,
15)
Z (CD open/close) 5 (6)
Z PUSH (tape open/close) 0
(11)
5
qk
qj
6
7
qh
8
9
qg qfqdqsqa
0
5
HCD-GP5
Remote control
ALPHABETICAL ORDER
BUTTON DESCRIPTIONS
A–M
P–Z
BASS +/– 0 (13)
CLEAR 8 (8, 9)
CLOCK/TIMER SELECT w;
(14, 15)
CLOCK/TIMER SET wa (5, 14,
15)
DISPLAY 2 (9, 10, 16)
DSG qa (13)
MD qk (17)
PLAY MODE/DIRECTION qd
(6, 7, 11, 12, 15)
PRESET +/– 5 (9)
REPEAT/FM MODE qf (7, 9)
SLEEP ql (13)
TREBLE +/– 9 (13)
TUNER BAND qh (8, 9)
TUNER MEMORY qs (8)
TUNING +/– 6 (8, 9)
VOL +/– 7 (14, 15)
?/1 (power) 1 (5, 9, 14, 15)
m/M (fast forward/rewind)
6 (6, 11)
./> (go back/go forward)
5 (5, 6, 7, 12, 14, 15, 16)
x (stop) 4 (6, 7, 11, 12, 20)
X (pause) 3 (6, 11)
CD N (play) qj (6, 7)
TAPE nN (play) qg (11, 12,
15)
wa
w;
ql
qk
1
2
qj
3
4
qh
5
qg
6
qf
qd
7
qs
8
9
qa
0
Setting the clock
Use buttons on the remote for the operation.
1
2
3
4
5
6
Press ?/1 to turn on the system.
Press CLOCK/TIMER SET.
Press ./> repeatedly to set the
hour.
Press CLOCK/TIMER SET.
Press ./> repeatedly to set the
minute.
Press CLOCK/TIMER SET.
The clock starts working.
To adjust the clock
1 Press CLOCK/TIMER SET.
2 Press ./> to select “CLOCK”, then
press CLOCK/TIMER SET.
3 Do the same procedures as step 3 to 6
above.
6
HCD-GP5
Ver 1.2 2003.11
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
SET
TOP CABINET,
REAR PANEL
FRONT PANEL ASSY
CD MECHANISM DECK
(CDM55A-K6BD44B)
MAIN BOARD,
TRANSFORMER BOARD
CONTROL BOARD,
SINGLE CASSETTE MECHANISM
LOADING BOARD
CD BOARD
TRAY (CDM55D)
OPTICAL PICK-UP
(KSM-213D),
HOLDER (C213)
Note: Follow the disassembly procedure in the numerical order given.
3-1. Top Cabinet, Rear Panel
3 six screws
(+BVTP 3 ×10)
5 top cabinet
a
2 three screws
(+KTP 3 ×12)
qa rear panel
a
4
9 three screws
(+BVTP 3 ×10)
7 two screws
(+BVTP 3 ×10)
b
6 wire (flat type)
11p
1 three screws
(+KTP 3 ×12)
8 three screws
(+BVTP 3 ×10)
q; tuner (FM/AM)
CN304
b
7
HCD-GP5
3-2. Front Panel Assy
4 four screws
(+BVTP 3 ×10)
5 wire (flat type) 13p (CN303)
1 four claws
7 connector 5p (CN1)
6 wire (flat type) 26p (CN302)
q; front panel assy
2 CD lid
8 connector 6p
9 connector 5p (CN201)
3 two screws
(+KTP 3 ×12)
3-3. CONTROL Board, Single Cassette Mechanism
1 three screws (+BVTP 3 × 10)
2 four screws (+BVTP 3 × 10)
3 four screws (+BVTP 3 × 10)
7 CONTROL board
4 wire (flat type) 26p (CN601)
6 wire (flat type) 8p (CN603)
5 wire (flat type) 13p (CN602)
8 four screws
(+BVTP 3 × 10)
9 two clamp
q; single cassette mechanism
(CMAL1Z240A)
8
HCD-GP5
3-4. CD Mechanism Deck (CDM55A-K6BD44B)
4 screw (+BVTP 3 ×10)
1 CD plate
7 CD mechanism deck
(CDM55A-K6BD44B)
CN101
5
3 wire (flat type) 21p (CN101,305)
6 CD holder
CN305
2 screw (+BVTP 3 ×10)
9
HCD-GP5
3-5. MAIN Board, TRANSFORMER Board
q; four screws
(+BVTP 3 ×10)
6 two screws
(+BVTP 3 ×10)
qs TRANSFORMER
board
1 connector 9p (CN801)
8 sub heat sink
qa power transformer
7 two screws
(+BVTP 3 ×10)
9 MAIN board
3 three screws
(+BVTP 3 ×10)
5 main heat sink
4 two screws
(+BVTP 3 ×10)
2 two screws (+BVTP 3 ×10)
3-6. LOADING Board
1 Remove the belt.
4 motor (LD) assy
(M901)
3 Remove soldering from the two points.
5 LOADING board
2 two screws (+BTP 2.6 × 6)
10
HCD-GP5
3-7. CD Board
1 screw(+P 2.6 × 5)
4 wire (flat type) 21p (CN101)
5 CD board
2 Remove soldering
from the four points.
3 wire (flat type) 16p
3-8. Tray (CDM55D)
1 While pressing the two protrusions A and B to unlock the two claws as shown,
pull the tray in the direction of the arrow C. (Be careful of the claws.)
A
claw
claw
C
2 tray
B
11
HCD-GP5
Ver 1.2 2003.11
3-9. Optical Pick-up (KSM-213D), Holder (C213)
3 insulator
5 screw (+PTTP M2.6)
6 stopper (BU)
7 compression spring
(T213)
8 insulator
qd optical pick-up
(KSM-213D)
2 two compression spring (T213)
1 two floating screws
(+PTPWH M2.6)
4 insulator
9 screw (+PTTP M2.6)
q; stopper (BU)
qa compression spring
(T213)
qs insulator
qg holder (C213)
12
qf floating screws
(+PTPWH M2.6)
HCD-GP5
SECTION 4
MECHANICAL ADJUSTMENTS
Precaution
1. Clean the following parts with a denatured alcohol-moistened
swab:
record/playback heads
pinch rollers
erase head
rubber belts
capstan
idlers
2. Demagnetize the record/playback head with a head demagnetizer.
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to the
parts adjusted.
5. The adjustments should be performed with the rated power
supply voltage unless otherwise noted.
Torque Measurement
Mode
Torque meter
FWD
CQ-102C
FWD
back tension
CQ-102C
REV
CQ-102RC
REV
back tension
CQ-102RC
FF/REW
CQ-201B
FWD tension
CQ-403A
REV tension
CQ-403R
Meter reading
3.04 – 6.96 mN • m
(31 to 71 g • cm)
(0.43 – 0.98 oz • inch)
0.20 – 0.58 mN • m
(2 to 6 g • cm)
(0.02 – 0.08 oz • inch)
3.04 – 6.96 mN • m
(31 to 71 g • cm)
(0.43 – 0.98 oz • inch)
0.20 – 0.58 mN • m
(2 to 6 g • cm)
(0.02 – 0.08 oz • inch)
6.97 – 14.02 mN • m
(71 to 143 g • cm)
(0.98 – 1.99 oz • inch)
9.8 mN • m or more
(100 g • cm or more)
(1.4 oz • inch or more)
9.8 mN • m or more
(100 g • cm or more)
(1.4 oz • inch or more)
13
HCD-GP5
SECTION 5
ELECTRICAL ADJUSTMENTS
DECK SECTION
1.
2.
3.
4.
5.
6.
7.
3.
0 dB=0.775V
test tape
P-4-A100
(10kHz, –10dB)
Demagnetize the record/playback head with a head demagnetizer.
Do not use a magnetized screwdriver for the adjustments.
After the adjustments, apply suitable locking compound to the
parts adjusted.
The adjustments should be performed with the rated power
supply voltage unless otherwise noted.
The adjustments should be performed in the order given in this
service manual. (As a general rule, playback circuit adjustment
should be completed before performing recording circuit
adjustment.)
The adjustments should be performed for both L-CH and RCH.
Switches and controls should be set as follows unless otherwise
specified.
Tape
Signal
Used for
P-4-A100
10 kHz, –10 dB
Azimuth Adjustment
WS-48B
3 kHz, 0 dB
Tape Speed Adjustment
test tape
P-4-A100
(10kHz, –10dB)
MAIN board
J203
speaker terminal
L
R
Waveform of oscilloscope
in phase
45°
90°
good
+
Turn the adjustment screw and check output peaks. If the peaks
do not match for L-CH and R-CH, turn the adjustment screw
so that outputs match within 1 dB of peak.
L-CH
peak
screw
position
output
level
within
1 dB
within 1dB
R-CH
peak
L-CH
peak
14
R-CH
peak
135°
180°
wrong
After the adjustments, apply suitable locking compound to the
parts adjusted.
[Tape Speed Check]
Procedure:
1. Turn the power on.
2. Insert the WS-48B into deck.
3. Press the Y button of deck.
4. Check the reading of frequency counter becomes 3000 ± 90 Hz.
–
2.
oscilloscope
Adjustment Location: Record/Playback/Erase Head
level meter
set
MAIN board
J203
speaker terminal
set
4.
[Record/Playback Head Azimuth Adjustment]
Procedure:
1. Mode : Playback
Mode: Playback
screw
position
Sample Value of Wow and flutter
W.RMS (JIS) less than 0.3%
(test tape: WS-48B)
HCD-GP5
RFDC signal waveform
CD SECTION
VOLT/DIV: 200 mV
TIME/DIV: 500 ns
Note:
1. CD Block is basically designed to operate without adjustment. Therefore, check each item in order given.
2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.
3. Use an oscilloscope with more than 10MΩ impedance.
4. Clean the object lens by an applicator with neutral detergent when the
signal level is low than specified value with the following checks.
S-curve Check
Connection:
level: 0.7 ± 0.2 Vp-p
Checking Location: CD board (Conductor side)
oscilloscope
RFAC Level Check
Connection:
CD board
TP (FE)
TP (DVC)
+
–
oscilloscope
CD board
Procedure:
1. Connect an oscilloscope to test point TP (FE) and TP (DVC)
on the CD board.
2. Turn the power on.
3. Put the disc (YEDS-18) in and turned power switch on again
and actuate the focus search. (actuate the focus search when
disc table is moving in and out)
4. Check the oscilloscope waveform (S-curve) is symmetrical
between A and B. And confirm peak to peak level within 2 ± 1
Vp-p.
S-curve waveform
symmetry
TP (RFAC)
TP (VC)
+
–
Procedure:
1. Connect an oscilloscope to test point TP (RFAC) and TP (VC)
on the CD board.
2. Turn the power on.
3. Put the disc (YEDS-18) in to playback the number five track.
4. Confirm that oscilloscope waveform is clear and check RFAC
signal level is correct or not.
Note: A clear RFAC signal waveform means that the shape “◊” can be
clearly distinguished at the center of the waveform.
RFAC signal waveform
A
within 2 ± 1 Vp-p
VOLT/DIV: 200 mV
TIME/DIV: 500 ns
B
level: 0.9 ± 0.4 Vp-p
Note: • Try to measure several times to make sure than the ratio of A : B
or B : A is more than 10 : 7.
• Take sweep time as long as possible and light up the
brightness to obtain best waveform.
Checking Location: CD board (Conductor side)
Checking Location: CD board (Conductor side)
RFDC Level Check
Connection:
oscilloscope
CD board
TP (RFDC)
TP (DVC)
+
–
Procedure:
1. Connect an oscilloscope to test point TP (RFDC) and TP (DVC)
on the CD board.
2. Turn the power on.
3. Put the disc (YEDS-18) in to playback the number five track.
4. Confirm that oscilloscope waveform is clear and check RFDC
signal level is correct or not.
Note: A clear RFDC signal waveform means that the shape “◊” can be
clearly distinguished at the center of the waveform.
15
HCD-GP5
E-F Balance Check
Connection:
Checking Location:
– CD BOARD (Conductor Side) –
oscilloscope
CD board
TP (TE)
TP (DVC)
+
–
Procedure:
1. Connect an oscilloscpe to test point TP (TE) and TP (DVC) on
the CD board.
2. AC is put in pushing CD u button.
3. FL tube carries out all lights and goes into CD test mode.
4. Put the disc (YEDS-18) in to playback the number five track.
5. Press the CD u button. (The tracking servo and the sledding
servo are turned OFF)
6. Check the level B of the oscilliscope's waveform and the A
(DC voltage) of the center of the Traverse waveform.
Confirm the following :
A/B x 100 = less than ± 22%
Traverse Waveform
Center of
the waveform
B
A (DC
voltage)
0V
level: 1.15 ± 0.5 Vp-p
7.
Press the CD u button. (The tracking servo and sledding
servo are turned ON)
Confirm the C (DC voltage) is almost equal to the A (DC
voltage) is step 4.
8. To exit from this mode, turn the power off.
Notes: • Always move the optical pick-up to most inside track when
exiting from this mode. Otherwise, a disc will not be unloaded.
• Do not run the sled motor excessively, otherwise the gear can
be chipped.
Traverse Waveform
C (DC
voltage)
0V
Tracking servo
Sled servo
OFF
Tracking servo
Sled servo
ON
Checking Location: CD board (Conductor side)
16
TP (VC)
IC103
TP
(DVC)
TP
(RFAC)
TP (FE)
IC101
TP (TE)
TP
(RFDC)
HCD-GP5
Ver 1.3 2004.01
SECTION 6
DIAGRAMS
• Circuit Boards Location
CD board
LOADING board
TRANSFORMER board
CONTROL board
MAIN board
HEADPHONE board
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For schematic diagrams.
For printed wiring boards.
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
f
•
: internal component.
• 2 : nonflammable resistor.
• 1 : fusible resistor.
• C : panel designation.
Note:
• X
• Y
f
•
•
Note:
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Note:
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
• A : B+ Line.
• B : B– Line.
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production tolerances.
• Circled numbers refer to waveforms.
• Signal path.
F : TUNER
J : CD
d : MD
E : PB (TAPE)
a : REC (TAPE)
• Abbreviation
AUS : Australian model
CND : Canadian model
E51 : Chilean and Peruvian models
HK
: Hong Kong model
KR
: Korean model
SP
: Singapore model
TW : Taiwan model
: parts extracted from the component side.
: parts extracted from the conductor side.
: internal component.
: Pattern from the side which enables seeing.
• Indication of transistor
C
Q
These are omitted.
B E
B C
E
These are omitted.
B C
E
These are omitted.
17
HCD-GP5
• Waveforms
– CD Board –
– CONTROL Board –
– MAIN Board –
1 IC103 qg (RFAC)
5 IC601 qd (O-XT2)
7 Q301 collector (Rec mode)
(CD Play Mode)
1.1Vp-p
200mV/DIV, 1 µs/DIV
30.5 µs
5.4Vp-p
2V/DIV, 10 µs/DIV
6 IC601 qh (XOUT)
2 IC101 el (FE)
(CD Play Mode)
200mVp-p
50mV/DIV, 200 µs/DIV
3 IC101 ra (TE)
(CD Play Mode)
250mVp-p
100mV/DIV, 200 µs/DIV
4 IC101 yj (XTAO)
59ns
1V/DIV, 20ns/DIV
18
5.4Vp-p
116ns
1V/DIV, 40ns/DIV
2.7Vp-p
10.9 µs
10.6Vp-p
5V/DIV, 5 µs/DIV
HCD-GP5
Ver 1.2 2003.11
6-1. Block Diagram
POWER AMP
IC201
PB/REC EQ AMP
IC301
J201
L
MD
R-CH
R
19 AUX L
OUT L 18
23 TU L
OUT R 16
12 L IN
µ CON
IC601
R-CH
21 CD L
MUTE
Q504
CONT 13
Q314-316
+10V
REG
10 F DATA
MUTE CONT
Q506
P AMP MUTE 9
83 O PW M3E
PWR
CONT
P CONT 8
10 STBY
-VCC 1
OVER LOAD
DET
98 R DATA
CLK
100 R CLK
93 R TUNED
STEREO
92 R STEREO
MUTE
80 R MUTE
RDS SIG
23 RDS SIG
6 A
9 D
E
10 E
F
LD
DRIVE
51 RFAC
L OUT 72
RFDCO 28
43 RFDC
R OUT 75
FE 16
39 FE
TE 18
41 TE
40 SE
SW 12
DATA 5
87 C DATA
CLOK 7
97 C CLK
XLAT 6
86 C XLT
SQCK 2
96 C SQSD
D502
+VM
FUCTION
KEY
I KEY1 18
S608-611
S613-616
FUCTION
KEY
I KEY2 19
SCOR 20
88 C SQCK
SQSO 1
3 C SCOR
SENS 8
94 C SENS
XTAI 66
2 PD
LED601
ECO LED
D431
CH1RI 3
32 FFDR
14 CH1FO
CH1FI 2
33 FRDR
Q408,409
DC
DET
+VH
REG
D422
STANDBY
+VL
X101
16.9344MHz
D432
XTAO 67
13 CH1RO
Q410
Q411
Q404
DC
DET
-VH
REG
D425
FT-
TRACKING
COIL
FIL2
LED CONT 75
MOTOR/COIL DRIVE
IC102
FOCUS
COIL
FIL1
R-CH
VR
F+
D416
GRID1 34
GRID11 44
SCLK 9
RFDCI 29
GND
PD
: REC (TAPE)
S601-607,612
FEI 17
1 LD
+7V
D435
66
RFAC 15
11 F
Q101
LD
45
.
47
50
SEG20 .
52
DIGITAL SERVO
IC101
8 C
D
: PB (TAPE)
J204
SUBWOOFER
FL601
7 B
C
DC
DET
FLUORESCENT
DISPLAY
27 RDS CLK
RF AMP
IC103
+5V
Q509,510
AC
DET
D434
SEG1
B
: MD
R
91 RDS DATA
RDS CLK
A
Q508
HOLD
Q507
P MONI 25
84 R CE
TUNED
RDS DATA
27 VC
: CD
99 R COUNT
D IN
CE
VC
J203
SPEAKER
Q501,502
R-CH
D OUT
OPTICAL PICK-UP
BLOCK
(KSM-213D)
: TUNER
L
L-CH
R-CH
• Signal Path
+VCC 2
Q503
+5V
• RCH is omitted due to same as L-CH.
+VH
+PRE 5
2 TAPE L REC OUT 28
+VM
J202
PHONES
R OUT 3
Q312
O DSG 76
TUNER UNIT
L OUT 4
11 CH2RO
T+
12 CH2FO
18 CH3RO
SLED
MOTOR
CH2RI 6
CD DOOR
MOTOR UNIT
30 TFDR
CH2FI 5
S101
LIMIT
31 TRDR
CH3RI 23
MOTOR DRIVE
IC604
SSTP 27
29 SRDR
CH3FI 24
16 CH4RO
CH4INS 25
15 CH4FO
MUTE 20
SPINDLE M
MOTOR
28 SFDR
26 MDP
85 C XRST
D405
CLOSE
D406
D404
-VH
O OPEN 74
4 FIN
OUT1 7
O CLOSE 73
2 RIN
OUT2 9
M
XRST 3
+VH
5 VM
+VM (7V)
M
17 CH3FO
D407
OPEN
CD DOOR SW 28
D423
+VP
TRAY
MOTOR
D402
+VL
D403
1 C PWM1
D413
-VL
95 C LDON
DECK BLOCK
-VFL
Q102,D101
Q305-311
REC/PB
SWITCH
R-CH
REC/PB
HEAD
+3.3V
+3.3V
REG
+5.5V
X601
32.768kHz
ERASE
HEAD
Q601
I RESET 11
RESET
SWITCH
7 O SHIFT
POWER DOWN 26
Q602-604
D608
RESET
Q407
+VCC
REG
+VCC
IC602
1
2
D609
+VM
REG
+VM
+5V
REG
P CONT
Q406
D605
VM
Q416
+7V
REG
+7V
Q419
+5V
REG
D418
D436
+VM
77 T REC
CD ON 82
CD P CONT
Q415,417,418
POWER CONT 8
RELAY
DRIVE
81 O BIAS
SW1
PLAY
FIL1
FIL2
CD +5V
Q303,304
DECK BLOCK
D410
Q402,403,405
D603
REMOTE
1 CONTROL 3
RECEIVER
15 X IN
16 X OUT
BIAS
OSC
Q301
Q302
D409
-VFL
REG
IC603
13 O XT2
X602
8.64MHz
Q413
µCON +B
12 I XT1
RMC IN 29
L301
BIAS
D417
D427
-VP
2 C PWM2
R-CH
79 T PLAY SW
SW2
R REC
Q401
SW3
F REC
RY801
24 T SW
Q607
D801-804
SW4
PACK
PT802
SUB TRANS
L801
V ECO
SW5
END
M1
DECK
MOTOR
PT801
POWER
TRANS
-VL
Q606
MOTOR
DRIVE
M
5 T END
6 T MTR CONT
Q605
T SOL
DRIVE
4 T SOL
19
19
LINE
FILTER
AC
IN
HCD-GP5
Ver 1.2 2003.11
6-2. Printed Wiring Board – CD Section –
• See page 17 for Circuit Boards Location.
• Semiconductor
Location
A
Ref. No.
D
B
Location
D101
F-5
IC101
IC102
IC103
E-4
C-5
D-2
Q101
Q102
C-2
G-5
TP (VC)
C
IC102
D
IC103
TP (RFAC)
TP (DVC)
E
IC101
CN305
24
F
G
1-680-849-
1
2
3
4
20
5
20
6
7
8
HCD-GP5
Ver 1.2 2003.11
• See page 18 for Waveforms.
6-3. Schematic Diagram – CD Section –
• See page 31, 32 for IC Block Diagrams.
KSM-213D
0uH
0uH
(1/4)
CN305
25
21
21
HCD-GP5
Ver 1.3 2004.01
6-4. Printed Wiring Board – Control Section – • See page 17 for Circuit Boards Location.
CONTROL BOARD
• Semiconductor
Location
Ref. No.
FLUORESCENT INDICATOR TUBE
IC601
US,CND,AEP,UK,KR
C
E51,HK,SP,
TW,AUS
TO
MAIN
BOARD
CN302
(Page 24)
3
2
1
IC602
4
IC603
STANDBY
Z
?/1
VOL +
+
CD
NX
M>
TUNER/
BAND
IC604
.m
B
–
TAPE
bB
TO
MAIN
BOARD
CN303
(Page 24)
MD
TAPE
MECHANISM
DECK
VOL –
DISPLAY
PLAY MODE/
TUNING MODE
DSG
zREC
PAUSE/START
x
CD SYNC
1-689-573-
LOADING BOARD
12
(12)
M901
22
22
1-674-336-
Location
D601
D602
D603
D604
D605
D606
D607
D608
D609
A-2
B-5
B-6
B-5
A-1
D-5
B-5
B-5
B-5
IC601
IC602
IC603
IC604
A-3
B-5
B-6
D-7
Q601
Q602
Q603
Q604
Q605
Q606
Q607
Q608
B-4
A-2
A-2
A-2
D-5
D-5
E-6
B-6
HCD-GP5
Ver 1.3 2004.01
• See page 18 for Waveforms.
6-5. Schematic Diagram – Control Section –
• See page 33 for IC Block Diagram. • See page 35 for IC Pin Function Description.
IC603
CONTROL BOARD
FLUORESCENT INDICATOR TUBE
RPM7140-V4
Q602-Q604
5V REGULATOR
5.3
5.3
5.9
9.5
8.8
T-72
100K
8.2
0
C
R601
R631
R700
R701
R702
1SS133T-72
2.5
2.5
1.9
0.5
OTHER MODELS
3.9K
22K
22K
NO MOUNT
22K
US, CND, AEP, UK, KR
10K
NO MOUNT
0
10K
1K
SLR-342VCT31
STANDBY
270
0
0
2SA1981Y
SWITCH
5.3
CN601
26P
IC601
VOLTAGE CHART
PIN NO.
VOLT.
PIN NO.
VOLT.
PIN NO.
1
2.3
41
-31.0
81
2
2.3
42
-31.0
82
VOLT.
5.2
3
0
43
-31.0
83
0.4
4
0.8
44
-31.0
84
0
85
5.2
5.2
86
5.2
47
-31.0
87
5.2
8
5.1
5.2
49
-31.0
89
0
50
-31.0
90
5.2
11
5.1
51
0
91
0.2
12
0
52
-31.0
92
5.3
13
2.6
53
-31.0
93
5.3
14
0
54
-31.0
94
3.3
15
2.6
55
-31.0
95
0
16
2.6
56
-31.0
96
3.3
17
5.2
57
-31.0
97
5.2
18
5.3
58
-31.0
98
0
19
5.3
59
-31.0
99
0.7
20
0.1
60
-31.0
100
0
21
0.1
61
-31.0
22
0.1
62
-31.0
23
0.1
63
-31.0
24
2.0
64
-31.0
25
3.1
65
-31.0
26
27
5.6
0.1
66
67
-31.0
-
28
29
0
5.3
68
69
2.5
30
-
70
5.0
31
-
71
0
32
-
72
5.2
33
-
73
5.2
34
-31.0
74
5.2
35
-31.0
75
0
36
-31.0
76
5.2
37
-31.0
77
38
-31.3
78
0
39
-31.0
79
4.9
40
-31.0
80
5.2
Z
MD
Y
TAPE
z
6
5
270
I/1
88
0
0
CN602
13P
Q601
RESET
1SS133T-72
1SS133T-77
1N4148A
-T265
5.1
0
5.6
5.6
0
1N4148A-T265
IC602
Q607
SWITCH
2SC2712L
-TE85R
-31.0
9
10
1SS133T-72
48
u Com
LC876764C-51E5
+
M>
-31.0
46
0
.m
-
45
10.2
7
x
REC
PAUSE/START
5.3
6
IC601
CD
u
5
TUNER/BAND
0.5
33P
IC604
RESET
CN151
5P
MOTOR DRIVE
10.2
(10.2)
4.7
2SA1296
GR-(TYPE2)
2.0
9.5
(10.2)
-
10.1
(1.0)
0
10.2
(10.2)
S1
(OPEN/CLOSE)
0
Q606
MOTOR DRIVE
10.2
(0.9)
0
TAPE
MECHANISM DECK
B
LOADING
BOARD
10.2
Q605
T SOL DRIVE
10.2
1SS133T-72
4.0
8P
TO
MAIN
BOARD
(1/4)
CN302
(Page 25)
23
23
+
M901
(TRAY)
TO
MAIN
BOARD
(1/4)
CN303
(Page 25)
HCD-GP5
Ver 1.3 2004.01
6-6. Printed Wiring Boards – Main Section –
MAIN BOARD
• Semiconductor Location
Ref. No.
A
TUNER
UNIT
C
TO
CONTROL BOARD
CN601
(Page 22)
TO
CD BOARD
CN101
(Page 20)
20
B
TO
CONTROL
BOARD
CN602
(Page 22)
12
AEP,UK,KR
AEP,UK,KR
TAPE MECHANISM
DECK
D
IC301
28
15
TO
TRANSFORMER
BOARD
CN801
(Page 29)
14
1
D301
D302
D303
D304
D402
D403
D404
D405
D406
D407
D408
D409
D410
D411
D412
D413
D414
D415
D417
D418
D419
D420
D421
D422
D423
D424
D425
D427
D428
D429
D430
D431
D432
D433
D434
D435
D501
E-2
E-5
B-4
E-4
F-6
F-6
H-6
H-6
G-6
G-6
C-7
C-7
C-7
C-7
C-7
F-6
H-6
H-6
F-6
C-6
H-7
H-7
C-6
H-4
H-4
H-4
G-4
G-4
H-4
H-4
H-4
H-4
G-4
F-1
H-2
H-1
G-1
IC201
IC301
H-3
E-4
Q301
F-1
R
MD
L
SUBWOOFER
HEADPHONE
BOARD
R+
IC201
L+
R
SPEAKERS
L
RLPHONES
1-689-575-
1-689-576-
24
24
Location
Ref. No.
Q302
Q303
Q304
Q305
Q306
Q307
Q308
Q309
Q310
Q311
Q312
Q313
Q314
Q315
Q316
Q401
Q402
Q403
Q404
Q405
Q406
Q407
Q408
Q409
Q410
Q411
Q415
Q416
Q417
Q418
Q419
Q501
Q502
Q503
Q504
Q505
Q506
Q507
Q508
Q509
Q510
Location
F-2
E-1
E-1
E-3
E-2
E-2
D-3
E-3
E-3
E-2
D-5
E-5
C-3
C-3
C-3
E-7
I-6
H-6
G-4
H-7
F-1
F-1
H-4
H-4
H-4
G-4
H-7
I-7
H-7
C-6
C-6
G-1
G-1
G-2
H-3
H-3
G-3
G-1
G-1
G-1
G-1
HCD-GP5
Ver 1.3 2004.01
6-7. Schematic Diagram – Main Section (1/4) –
• See page 33 for IC Block Diagram.
TUNER
UNIT
MAIN BOARD (1/4)
CN302
26P
CN304
15P
Q314 - Q316
REG
Q316
2SA1980G
8.0
(2.5)
10.2
(10.3)
0.45uH
16V
Q314
2SC3052F-T1-LF
4.6
(1.0)
Q315
2SC3052F-T1-LF
C
5.2 (1.7)
D303
UZ-5.1BSB-TP
C345 100 / 10V
TO
CONTROL
BOARD
CN601
(Page 23)
1
0.45uH
AEP, UK, KR
AEP, UK, KR
FB302
0.45uH
JW342
2
3
4
28
5
6
CN303
13P
7
TO
CONTROL
BOARD
CN602
(Page 23)
B
8
0
R369 1K
5.1
C357
0.22 / 50V
C356
0.22 / 50V
C355
0.22 / 50V
C354
0.22 / 50V
C351
4.7 / 50V
JR301 0
L203
10uH
C339
1 / 50V
FB303 0.45uH
V
L302 36uH
0
0
0
0
0
0
0
0
0
0
0
0
0
0
C358
4.7 / 50V
V
A
C338
1 / 50V
IC301
L204 10uH
0
IC B/D
D304
UZ-4.7BSA-TP
-4.3
0.1
4.8
0
0
0
V
0
0
0
0
0
0
V
0
PB/REC EQ AMP
9
V
2
25
25
TO
MAIN BOARD
(3/4)
(Page 27)
27
26
25
24
23
22
21
20
19
18
16
17
15
13
14
11
12
CN305
21P
10
TO
CD
BOARD
CN101
(Page 21)
Q312, Q313
SWITCH
0
5.1
1
TO
MAIN BOARD
(2/4)
(Page 26)
HCD-GP5
Ver 1.3 2004.01
6-8. Schematic Diagram – Main Section (2/4) –
• See page 34 for IC Block Diagram.
HEADPHONE BOARD
MAIN BOARD (2/4)
5P
PHONES
L
MD
FB203
0.45uH
R
1
*1 IC201
AEP,UK,KR MODELS : STK403-030
OTHER MODELS : STK403-040
IC201
POWER AMP
IC201
*1
IC B/D
4.7
Q506
MUTE CONTROL
0.4
-0.3
25V
0
15.6
0
30.6
0
0
0
0
-17.1
J203
2SA1162G
-TE85R
2.2/50V
3.1
L
SPEAKERS
3.1
-19.2
2SC2712G
-TE85R
4.7
4.7
0.4
0
0.0022
2
10
0.6
Q504, Q505
MUTE
-0.4
1SS133T-72
KTC3199GR
-TP
V
V
-0.4
2SC2712G
-TE85R
28
0
4.7
4
0.0022
-19.2
3
0
3
R
10
0.45uH
J204
SUBWOOFER
-19.4
5
4.3
2.2/50V
2SC2712G-TE85R
3.1
4.8
HOLD
10.2
6
V
V
0.1
V
2SC2712G-TE85R
0.9
0.5
2SC2712G
-TE85R
V
AC DET
0.1
0.6
2SA1162G
-TE85R
0.5
2.2K
0.9
8
36.2
17.9
+VH REG
18.8
18.9
18.8
V
1SS133T-72
4.6
F 2SC3052F-T1-LF
+VH REG
UZ-10BSC-TP
18.8
12.3
DC DET
12.4
1SS133T-72
MTZJ-T-77-7.5B
RL203GW-TA
RL203GW-TA
-11.8
V
-19.5
9
MTZJ-T-77-8.2C
-VH REG
-36.9
F
DC DET
-12
-36.7
3
26
TO
MAIN BOARD
(4/4)
(Page 28)
26
38
37
35
36
32
33
34
31
-36.9
30
1
Q509, Q510
DC DET
7
29
TO
MAIN BOARD
(1/4)
(Page 25)
2SC2712G-TE85R
POWER CONTROL
HCD-GP5
Ver 1.3 2004.01
• See page 18 for Waveform.
27
26
25
24
23
22
21
20
19
16
17
15
13
14
11
12
10
2
TO
MAIN BOARD
(1/4)
(Page 25)
18
6-9. Schematic Diagram – Main Section (3/4) –
MAIN BOARD (3/4)
40
Q305
2SK2158-T2B
0
Q305 - Q311
REC/PLAY
3.4
(-0.4) SWITCH
0
(-0.4)
41
V
Q308
2SK2158-T2B
Q307
2SK2158-T2B
0
(-0.4)
0
Q310
2SA1162-G
0
C333
100 / 16V
R331
0
D302
25V
3.7
(-0.4)
3.4
(-0.4)
3.8
(0)
25V
Q306
DTA124EUA-T106
D301
1SS133T-72
UZ-4.7BSA-TP
0
C346
10P
42
Q311
DTA124EUA-T106
43
4
-0.2
(-0.7)
Q309
2SA1162-G
44
0
TAPE MECHANISM
DECK
45
Q301, Q302
BIAS OSC
10.3
CN301
7P
Q419
2SC3266GR
0.7
1.2
REGULATOR
(4.9)
(6.9)
Q302
2SC5343GL
Q301
2SC5343GL
1.1
V
1.2
(5.5)
V
9.8
10.2
0.5
V
9.8
Q304
2SC3052F-T1-LF
46
10.2
Q303
2SC5343GL
L301
BIAS
OSCILLATION
0.5
0.5
10.3
47
Q303, Q304
BIAS SWITCH
7
27
27
D421
MTZJ-T-72-5.6B
TO
MAIN BOARD
(4/4)
(Page 28)
HCD-GP5
Ver 1.3 2004.01
6-10. Schematic Diagram – Main Section (4/4) –
38
37
35
36
32
33
34
31
30
29
3
TO
MAIN BOARD
(2/4)
(Page 26)
MAIN BOARD (4/4)
40
MTZJ-T-77-33D
0.047
(F20)
0.047
(F20)
(F20)
1SS133T-72 MTZJ-T-77-8.2C
-31.7
2SC1815GR-TPE2
-31.2
1N4003LES
-34.5
Q413
-VFL VOLTAGE REGULATOR
1N4003LES
PN401
42
0
43
-E
10.3
D
17.5
17
G
1SS133T-72
5
Q406, Q407
REG
C427
470P 0.9
50V
45
0.6
V
R319
JW
0.7
MTZJ-T-72-8.2C
2SC3052F-T1-LF
5.6
Q402, Q403, Q405
REG
2SC2712L-TE85R
RELAY DRIVE
16.2
L
44
V
10.3
10.2
9.6
1SS133T-72
0.2
0.6
0
2SC2712L
-TE85L 0
1.2(7)
18.3(17.6)
46
-E
17.9(17)
T-72
17.9(16.3)
D418
UZ-5.1BSB-TP
1.8(1.0)
0(0.6)
L
POWER CONTROL
T-72
4
1.7(0.8)
TO
MAIN BOARD
(3/4)
(Page 27)
(F20)
1N4003LES
1N4003LES
RL203GW-TA
V
RL203GW-TA
41
RL203GW-TA
RL203GW-TA
V
L
1.5(0.1)
1.6(0)
0(4.7)
47
Q415, Q417
POWER CONTROL
28
28
TO
TRANSFORMER
BOARD
CN801
(Page 30)
HCD-GP5
Ver 1.3 2004.01
6-11. Printed Wiring Board – Power Section – • See page 17 for Circuit Boards Location.
E51,TW
TRANSFORMER BOARD
E51
E51
VOLTAGE
SELECTOR
TW
D
JW806
SW801
POWER TRANSFORMER
230V
230V
JW807
TW
PT802
POWER TRANSFORMER
(SUB)
1
2
AC
IN
EXCEPT E51,TW
TRANSFORMER BOARD
D
POWER TRANSFORMER
PT802
POWER TRANSFORMER
(SUB)
1
2
AC
IN
29
29
TO
MAIN BOARD
PN401
(Page 24)
TO
MAIN BOARD
PN401
(Page 24)
HCD-GP5
Ver 1.3 2004.01
6-12. Schematic Diagram – Power Section –
E51, TW
TRANSFORMER BOARD
0
E51
E51
PT801
POWER TRANSFORMER
TW
0
SW801
TO
MAIN
BOARD
(4/4)
PN401
(Page 28)
230V
VOLTAGE
SELECTOR
120V
D
*
TW
* not replaceable
bult in transformer
RY801
0 POWER RELAY
CN801
9P
D802 1SS133T-72
0
L801
LINE FILTER
D803 1SS133T-72
D801 1SS133T-72
D804 1SS133T-72
0
PT802
POWER TRANSFORMER (SUB)
AC
0 IN
CN802
2P
EXCEPT E51, TW
TRANSFORMER BOARD
0
PT801
POWER TRANSFORMER
0
CN801
9P
*
* not replaceable
bult in transformer
RY801
TO
MAIN
BOARD
(4/4)
PN401
(Page 28)
0 POWER RELAY
D
0
D802 1SS133T-72
L801
LINE FILTER
D803 1SS133T-72
D801 1SS133T-72
D804 1SS133T-72
0
PT802
POWER TRANSFORMER (SUB)
AC
0 IN
CN802
2P
30
30
HCD-GP5
• IC Block Diagrams
– CD Board –
DOUT
VDD
VSS
AVDD3
PCO
FILI
FILO
CLTV
AVSS3
RFAC
BIAS
ASYI
ASYO
AVDD0
IGEN
AVSS0
ADIO
RFDC
CE
TE
IC101 CXD3017Q
60
59 58 57
56 55 54 53
52
51 50 49 48
47
46 45
44
43 42 41
LRCK 61
PCMD 62
ERROR
CORRECTOR
INTERNAL BUS
DIGITAL
OUT
D/A
INTERFACE
DIGITAL
PLL
16K
RAM
40 SE
39 FE
38 VC
ASYMMETRY
CORRECTOR
OPERATIONAL
AMPLIFIER
ANALOG SWITCH
EFM
DEMODULATOR
A/D
CONVERTER
BCK 63
EMPH 64
XVDD 65
66
67
68
69
70
71
TIMING
LOGIC
CLOCK
GENERATOR
SERVO DSP
LOUT1 72
PWM
AVSS1 73
AVSS2 74
LOUT2 75
SUBCODE
PROCESSOR
PWM
RMUT 79
LMUT 80
TRACKING
SERVO
TRACKING
PWM GENERATOR
SLED
SERVO
SLED PWM
GENERATOR
SERVO
INTERFACE
OVER SAMPLING
DIGITAL FILTER
AIN2 76
FOCUS PWM
GENERATOR
33
32
31
30
29
28
SERVO AUTO
SEQUENCER
SERIAL IN
INTERFACE
DIGITAL
CLV
26 MDP
25 LOCK
MIRR, DFCT,
FOK
DETECTOR
24 FOK
23 DFCT
22 MIRR
21 COUT
C2PO
SCOR
WFCK
XUGF
XPCK
GFS
9 10 11 12 13 14 15 16 17 18 19 20
SPOA
SPOB
XLON
5 6 7 8
SCLK
VDD
ATSK
XRST
4
SYSM
3
SQSO
SQCK
CPU
INTERFACE
1 2
FRDR
FFDR
TRDR
TFDR
SRDR
SFDR
27 SSTP
3rd ORDER
NOISE SHAPER
AOUT2 77
AVDD2 78
37 XTSL
36 TES1
35 TEST
34 VSS
PWM GENERATOR
FOCUS
SERVO
DATA
XLAT
CLOK
SENS
XTAI
XTAO
XVSS
AVDD1
AOUT1
AIN1
PRFVCC
CH4BIN
CH4SIN'
CH4SIN
CH3FIN
CH3RIN
CAPAIN3
GND
MUTE
POWVCC
CH3OUTR
CH3OUTF
CH4OUTR
CH4OUTF
IC102 BA5974FP-E2
28
27
26
25
24
23
22
21
20
19
18
17
16
15
F
R
R
MUTE
INTERFACE
F
LEVEL SHIFT
THERMAL
SHUTDOWN
F
INTERFACE
F
R
F
R
INTERFACE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
CH1RIN
CAPAIN1
CH2FIN
CH2RIN
CAPAIN2
GND
VREFIN
POWVCC
CH2OUTR
CH2OUTF
CH1OUTR
CH1OUTF
R
CH1FIN
R
VREFOUT
F
31
HCD-GP5
IC103 CXA2581N-T4
RW/ROM
A
30 DC OFST
29 RFDCI
–
+
B
–
+
28 RFDCO
C
D
DVC
DVC
VCC
VC
–
+
DVC
VC
RW/ROM
VOFST
27 VC
VC
LD
1
PD
2
EQ IN
3
EQ
26 RFC
25 VFC
24 BST
RFAC
VCA
23 RFG
VCC
22 VCC
APC AMP
EQ ON/OFF
RW/ROM
AC SUM
GND
RFAC
SUMMING
AMP
4
5
A
A
A
B
C
D
B
C
B
C D
21 CEI
–
+
20 CE
D
DVC
A
B
C
D
6
7
8
9
VOFST
–
+
VC
RW/ROM
19 TE BAL
RW/ROM
E 10
GM
F 11
GM
SW 12
APC-OFF
(Hi-Z)
RW/ROM
(H/L)
–
+
18 TE
VC
RW/ROM
RW/ROM
DVCC 13
B
DVC
DVC 14
D
A
17 FEI
VOFST
–
+
–
+
C
DVC
VC
RW/ROM
RFAC 15
32
16 FE
VSS
RNF
TON_L-R
OUT-R
TON_L-L
OUT-L
AUX-L
AUX-R
CD-L
CD-R
RIN
GND
8
TON_H-R
OUT2
7
FIN
VREF
6
TUNER-L
IC301 BD3881FV
5
VCC
– MAIN Board –
4
TUNER-R
3
VM
2
OUT1
REC-O_R
1
TON_H-L
TAPE-R
TAPE-L
REC-O_L
HCD-GP5
– CONTROL Board –
IC604 BA6956AN
TSD
CONTROL LOGIC
9
33
HCD-GP5
IC201 STK403-040
C3
C4
TR1
PRE DRIVER
IC CH1
TR4
R7
R5
R1
TR3
R6
R2
R3
TR6
R8
R4
C1
PRE DRIVER
IC CH2
C2
TR2
TR5
34
CH2 OUT
+PRE
7
8
9
10
11
12
CH2 IN
CH1 OUT
6
CH2 NF
+VCC (+VP)
SUB
ST BY
5
CH1 IN
4
CH1 NF
3
GND
2
SUB
1
–VCC (–VP)
BIAS CIRCUIT
HCD-GP5
6-13. IC Pin Function Description
IC601 LC876764A-51E5 System Control (CONTROL Board)
Pin No.
Pin Name
I/O
Description
1
C-PWM1
O
PWM1 signal output to the CD unit
2
C-PWM2
O
PWM2 signal output to the CD unit
3
C-SCOR
I
SCOR (SUBQ request) signal output to the CD unit
4
T-SOL
O
Solenoid control signal output to the tape deck
5
T-END
I
Tape deck reel switch signal input
6
T-MTR.CONT
O
Motor control signal output to the tape deck
7
O-SHIFT
O
Clock shift control signal output
8
P-CON
O
Power relay control signal output
9
PAMP-MUTE
O
Muting control signal output to the power amplifier
10
F-DATA
O
Control signal output to the sound processor
11
I-RESET
I
Reset signal input from the reset IC (IC603)
12
I-XT1
I
Resonator terminal (32.768kHz)
13
O-XT2
O
Resonator terminal (32.768kHz)
14
GND.
—
Ground terminal
15
XIN
I
Resonator terminal (8.64MHz)
16
XOUT
O
Resonator terminal (8.64MHz)
17
VDD1
—
Power supply terminal
18
I-KEY1
I
Key AD input 1
19
I-KEY2
I
Key AD input 2
20
BASS ENC INPUT
I
Encoder signal input from the bass encoder
21
TRBLE ENC INPUT
I
Encoder signal input from the treble encoder
22
VOL-ENC
I
Encoder signal input from the volume encoder
23
RDS-SIG
I
RDS signal level input from the tuner
24
T-SW
I
Tape switch status signal input from the tape deck (SW2 to 4)
25
I-POWER MONI
I
Power amplifier overload monitoring signal input
26
I-POWER DOWN
I
Power down detection signal input
27
RDS-CLK
I
RDS clock input from the tuner
28
CD-DOOR-SW
I
CD door open/close switch signal input
29
RMC-IN
I
Remote sensor signal input
30 to 33
NC
—
Not used (open)
34 to 44
O-GRID1 to 11
O
Grid signal output to the fluorescent indicator tube
45
O-SEG1
O
Segment signal output to the fluorescent indicator tube
46
VDD3
—
Power supply terminal
47 to 50
O-SEG2 to 5
O
Segment signal output to the fluorescent indicator tube
51
GND.
—
Ground terminal
52 to 66
O-SEG6 to 20
O
Segment signal output to the fluorescent indicator tube
67, 68
NC
—
Not used (open)
69 to 71
I-INI-1 to 3
I
72
VDD4
—
Power supply terminal
73
O-CLOSE
O
CD tray close control signal output
74
O-OPEN
O
CD tray open control signal output
75
LED-CONT
O
Standby LED control signal output
76
O-DSG
O
Not used (open)
Initial selection signal input
77
T-REC
O
REC/PLAY control signal output to the REC/PLAY switch circuit
78
I-INI.BASS+2
—
Not used (fixed at “L”)
79
T-PLAY.SW
I
Play switch signal input from the tape deck
80
R-MUTE
O
Muting signal output to the tuner
81
O-BIAS
O
Bias control signal output to the bias oscillation circuit
82
CD-FUN
O
CD power supply control signal output
83
O-PWM3E
O
Tuner power supply control siganl output
35
HCD-GP5
Pin No.
Pin Name
I/O
Description
84
R-CE
O
Tuner chip enable signal output to the tuner
85
C-XRST
O
Reset signal output to the CD unit
86
C-XLT
O
Latch signal output to the CD unit
87
C-DATA
O
Data output to the CD unit
88
C-SQCK
O
SUBQ clock output to the CD unit
89
VSS2
—
Ground terminal
90
VDD2
—
Power supply terminal
91
RDS-DATA
I
RDS data input from the tuner
92
R-ST
I
Stereo/mono detection signal input from the tuner
93
R-TUNED
I
Tuner tuned status signal input
94
C-SENS
I
SENS signal input from the CD unit
95
C-LDON
O
LD ON signal output to the CD unit
96
C-SQSO
I
SUB-Q data input from the CD unit
97
C-CLK
O
Clock output to the CD unit
98
R-DATA
O
Data output to the tuner
99
R-COUNT
I
IF count signal input from the tuner
100
R-CLK
O
Clock signal output to the tuner
36
HCD-GP5
Ver 1.5
SECTION 7
EXPLODED VIEWS
NOTE:
• -XX, -X mean standardized parts, so they may
have some differences from the original one.
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
• The mechanical parts with no reference number
in the exploded views are not supplied.
•
Abbreviation
AUS : Australian model
CND : Canadian model
E51 : Chilean and Peruvian models
HK : Hong Kong model
KR : Korean model
SP : Singapore model
TW : Taiwan model
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
7-1. Overall Section
#3
a
1
#1
2
3
#2
b
a
#3
#1
6
CD mechanism
deck section
#3
#2
#3
#2
front panel section
not
supplied
5
not
supplied
not
supplied
#2
4
#1
Ref. No.
chassis section
b
Part No.
Description
1
1
2
2
3
4-247-756-01
4-247-756-21
1-827-731-11
1-828-984-11
1-693-619-11
CABINET, TOP (US,CND,AEP,UK,KR)
CABINET, TOP (AUS,E51,HK,SP,TW)
WIRE (FLAT TYPE)(11 CORE)(EXCEPT AEP,UK)
WIRE (FLAT TYPE)(15 CORE)(AEP,UK)
TUNER (FM/AM)(AEP,UK,KR)
Remark
3
3
4
1-693-620-11 TUNER (FM/AM)(AUS,E51,HK,SP,TW)
1-693-624-11 TUNER (FM/AM)(US,CND)
4-247-367-01 LID,CD
Ref. No.
Part No.
Description
05
05
05
6
#1
1-555-795-00
1-769-079-22
1-783-532-11
1-827-714-11
7-685-248-14
CORD, POWER (EXCEPT US,CND,TW,KR)
CORD, POWER (KR)
CORD, POWER (US,CND,TW)
WIRE (FLAT TYPE)(21 CORE)
SCREW +KTP 3X12 TYPE2 NON-SLIT
#2
#3
Remark
7-685-647-79 SCREW +BVTP 3X10 TYPE2 NON-S
7-685-647-14 SCREW +BVTP 3X10 TYPE2 NON-S
37
HCD-GP5
Ver 1.5
7-2. Front Panel Section
#2
#2
59
#2
77
58
72
76
57
56
60
61
62
64
63
79
not
supplied
66
#2
55
65
53
68
73
67
#2
#2
54
69
not
supplied
not
supplied
70
#2
not
supplied
not
supplied
not
supplied
71
52
51
Ref. No.
Part No.
Description
Part No.
Description
51
52
53
54
55
4-247-757-01
X-4955-860-1
X-4955-859-1
4-238-631-01
4-247-361-01
SPR-T,CASS
LID TC ASSY
HOLDER CASSETTE ASSY
TAPE SPRING
COVER, DISPLAY
66
67
68
69
70
4-247-369-01
4-247-368-01
4-231-841-01
4-231-825-01
4-242-318-01
BUTTON,OPEN/CLOSE
BUTTON,FUNCTION
SPRING (HEART CAM-B)
CAM (B), HEART
OIL-DMPR, 70
56
57
57
58
59
4-247-374-01
4-247-366-01
4-247-366-21
4-247-376-01
4-247-370-01
WINDOW,DISPLAY
CABINET, FRONT (AEP,UK)
CABINET, FRONT (EXCEPT AEP,UK)
POWER,INDICATER
BUTTON,POWER
71
72
73
76
77
4-247-752-01
1-829-747-11
1-796-351-51
4-247-371-01
A-4747-954-A
RUBBER, FOOT
WIRE (FLAT TYPE)(26 CORE)
MECHANISM, SINGLE CASSETTE
BUTTON,CD
CONTROL BOARD, COMPLETE (AEP,UK,KR)
60
61
62
63
64
65
4-247-357-01
4-247-358-01
4-247-359-01
4-247-356-01
4-247-360-01
1-689-576-11
CAP, AUX
CAP, CD
CAP, TUNING
CAP, VOL
COVER, RING
HEADPHONE BOARD
77
77
A-4747-960-A CONTROL BOARD, COMPLETE (US,CND)
A-4748-774-A CONTROL BOARD, COMPLETE
(E51,HK,SP,TW,AUS)
3-229-336-01 SCREW +BVWH TAPPING
7-685-647-79 SCREW +BVTP 3X10 TYPE2 NON-S
38
Remark
Ref. No.
79
#2
Remark
HCD-GP5
Ver 1.4 2004.08
7-3. Chassis Section
not
supplied
#4
#2
103
not supplied
102
PT801
#2
not
supplied
#2
#2
#2
not supplied
#2
#2
not supplied
101
Ref. No.
101
102
103
103
103
0 PT801
Part No.
Description
4-247-752-01
1-689-574-11
A-4747-957-A
A-4747-962-A
A-4748-777-A
RUBBER, FOOT
TRANSFORMER BOARD
MAIN BOARD, COMPLETE (AEP,UK,KR)
MAIN BOARD, COMPLETE (US,CND)
MAIN BOARD, COMPLETE (E51,HK,SP,TW,AUS)
1-443-032-11 TRANSFORMER, POWER (US,CND)
Remarks
Ref. No.
Part No.
Description
0 PT801
0 PT801
0 PT801
0 PT801
#2
1-443-033-11
1-443-034-11
1-443-036-11
–––––––––––
7-685-647-79
TRANSFORMER, POWER (AEP,UK)
TRANSFORMER, POWER (HK,SP,AUS)
TRANSFORMER, POWER (KR)
TRANSFORMER, POWER (E51,TW)
SCREW +BVTP 3X10 TYPE2 NON-S
#4
Remarks
7-682-561-09 SCREW +B 4X8P
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
39
HCD-GP5
Ver 1.2 2003.11
7-4. CD Mechanism Deck Setion
not supplied
164
162
159
158
157
156
not supplied
161
not supplied
160
165
155
154
166
167
M901
153
151
168
optical pick-up
(KSM-213D)
169
152
#6
169
169
170
170
169
171
167
170
172
171
173
163
#7
Ref. No.
Part No.
Description
Part No.
Description
151
152
153
154
155
1-674-336-12
4-925-315-31
4-224-894-22
4-220-233-01
4-221-815-11
LOADING BOARD
DAMPER
TRAY (CDM55D)
CAM (CDM55)
ROLLER
164
165
166
167
168
A-473-508-2A
4-231-777-02
4-244-962-01
4-985-672-01
4-229-358-01
MAGNET
SHEET (KH2)
HOLDER (C213)
SCREW (+PTPWH M2.6), FLOATING
SHAFT (BU21)
156
157
158
159
160
4-220-237-01
4-220-234-01
4-221-816-01
4-227-598-01
4-220-238-01
GEAR (A)
PULLEY (LDG)
BELT (CDM55)
SPACER (55)
GEAR (B)
169
170
171
172
173
4-227-549-11
4-244-959-01
4-231-151-01
4-218-253-31
1-757-055-11
INSULATOR
SPRING (T213), COMPRESSION
STOPPER (BU)
SCREW (M2.6), +BTTP
WIRE, PARALLEL (FFC) (16 CORE)
161
162
163
4-220-229-02 LEVER (SW)
4-220-239-01 SPRING, TORSION
A-4728-536-A CD BOARD, COMPLETE
M901
#6
#7
A-4735-337-A MOTOR (LD) ASSY (TRAY)
7-685-533-19 SCREW +BTP 2.6X6 TYPE2 N-S
7-621-255-32 SCREW +P 2X5
40
Remarks
Ref. No.
Remarks
HCD-GP5
Ver 1.2 2003.11
7-5. KSM-213D
601
Ref. No.
Part No.
0 601
A-4735-357-A BASE ASSY, OP (KSM-213D)
Description
Remarks
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
41
HCD-GP5
Ver 1.3 2004.01
SECTION 8
ELECTRICAL PARTS LIST
CD
NOTE:
• Due to standardization, replacements in the parts
list may be different from the parts specified in
the diagrams or the components used on the set.
• -XX, -X mean standardized parts, so they may
have some difference from the original one.
• Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
• RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
Ref. No.
Part No.
•
•
•
•
CAPACITORS:
uF: µF
COILS
uH: µH
SEMICONDUCTORS
In each case, u: µ, for example:
uA...: µA... , uPA... , µPA... ,
uPB... , µPB... , uPC... , µPC... ,
uPD..., µPD...
Abbreviation
AUS : Australian model
CND: Canadian model
E51 : Chilean and Peruvian models
Description
Remarks
A-4728-536-A CD BOARD, COMPLETE
******************
< CAPACITOR >
10%
10.00%
10%
10%
10.00%
50V
16V
50V
50V
16V
Ref. No.
HK
KR
SP
TW
: Hong Kong model
: Korean model
: Singapore model
: Taiwan model
When indicating parts by reference number,
please include the board name.
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
Part No.
Description
Remarks
C190
C191
C192
C193
1-115-156-11
1-126-933-11
1-126-382-11
1-126-382-11
CERAMIC CHIP
ELECT
ELECT
ELECT
1uF
100uF
100uF
100uF
10V
20.00% 16V
20.00% 16V
20.00% 16V
C194
C196
C197
C198
1-164-360-11
1-164-360-11
1-107-826-11
1-126-933-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.1uF
0.1uF
0.1uF
100uF
16V
16V
10.00% 16V
20.00% 16V
C101
C102
C103
C104
C108
1-162-967-11
1-107-826-11
1-162-962-11
1-162-962-11
1-107-826-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0033uF
0.1uF
470PF
470PF
0.1uF
C109
C110
C111
C112
C114
1-162-965-11
1-162-967-11
1-162-927-11
1-115-156-11
1-164-360-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0015uF 10%
0.0033uF 10%
100PF
5%
1uF
0.1uF
C116
C117
C118
C121
C122
1-126-382-11
1-126-382-11
1-162-964-11
1-164-360-11
1-126-933-11
ELECT
ELECT
CERAMIC CHIP
CERAMIC CHIP
ELECT
100uF
100uF
0.001uF
0.1uF
100uF
20.00% 16V
20.00% 16V
10%
50V
16V
20.00% 16V
C123
C124
C125
C126
C127
1-162-970-11
1-125-891-11
1-164-360-11
1-164-360-11
1-126-382-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.01uF
0.47uF
0.1uF
0.1uF
100uF
10%
25V
10.00% 10V
16V
16V
20.00% 16V
C130
C131
C133
C140
C143
1-164-360-11
1-126-933-11
1-162-921-11
1-115-156-11
1-164-360-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
100uF
33PF
1uF
0.1uF
16V
20.00% 16V
5%
50V
10V
16V
C145
C146
C153
C159
C162
1-164-360-11
1-107-826-11
1-164-360-11
1-162-969-11
1-126-382-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.1uF
16V
0.1uF
10.00% 16V
0.1uF
16V
0.0068uF 10%
25V
100uF
20.00% 16V
C163
C165
C167
C168
C171
1-126-933-11
1-164-360-11
1-162-920-11
1-162-919-11
1-115-412-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100uF
0.1uF
27PF
22PF
680PF
20.00% 16V
16V
5%
50V
5%
50V
5.00% 25V
R101
R102
R103
R104
R106
1-216-821-11
1-216-845-11
1-216-835-11
1-216-839-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
100K
15K
33K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C172
C181
C182
C183
C184
1-162-927-11
1-115-412-11
1-162-927-11
1-162-968-11
1-162-968-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
680PF
100PF
0.0047uF
0.0047uF
5%
5.00%
5%
10%
10%
50V
25V
50V
50V
50V
R107
R108
R109
R111
R114
1-216-833-11
1-216-827-11
1-216-857-11
1-216-846-11
1-218-745-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
3.3K
1M
120K
160K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C185
1-125-891-11 CERAMIC CHIP
0.47uF
10.00% 10V
R116
1-216-797-11 METAL CHIP
10
5%
1/10W
< CONNECTOR >
50V
50V
50V
10V
16V
CN101
CN102
1-770-528-31 CONNECTOR, FFC/FPC 21P
1-779-466-11 CONNECTOR, FFC (LIF (NON-ZIF)) 16P
< DIODE >
D101
8-719-056-77 DIODE UDZ-TE-17-3.9B
< FERRITE BEAD >
FB101
FB103
1-469-144-21 FERRITE
1-469-144-21 FERRITE
0uH
0uH
< IC >
IC101
IC102
IC103
8-752-402-31 IC CXD3017Q
8-759-549-28 IC BA5974FP-E2
8-752-089-74 IC CXA2581N-T4
< JUMPER RESISTOR >
JR101
1-216-864-11 METAL CHIP
0
< TRANSISTOR >
42
Q101
Q102
8-729-049-31 TRANSISTOR
8-729-920-85 TRANSISTOR
2SB710A-RTX
2SD1664-T100-QR
< RESISTOR >
HCD-GP5
Ver 1.3 2004.01
CD
Ref. No.
Part No.
Description
R117
R118
R119
R120
1-216-821-11
1-216-809-11
1-216-826-11
1-216-835-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
100
2.7K
15K
5%
5%
5%
5%
Remarks
1/10W
1/10W
1/10W
1/10W
R122
R123
R124
R131
R143
1-216-845-11
1-216-833-11
1-216-845-11
1-216-813-11
1-216-836-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
10K
100K
220
18K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R144
R147
R148
R149
R150
1-216-836-11
1-216-828-11
1-216-797-11
1-216-797-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
18K
3.9K
10
10
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R151
R158
R159
R162
R171
1-216-845-11
1-216-837-11
1-216-837-11
1-216-847-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
22K
22K
150K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R172
R173
R181
R182
R183
1-216-837-11
1-216-837-11
1-216-837-11
1-216-837-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22K
22K
22K
22K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R190
R191
R192
R193
R194
1-216-813-11
1-216-839-11
1-216-839-11
1-216-846-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220
33K
33K
120K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R195
R196
R197
1-216-853-11 METAL CHIP
1-216-825-11 METAL CHIP
1-216-821-11 METAL CHIP
470K
2.2K
1K
5%
5%
5%
1/10W
1/10W
1/10W
< NETWORK >
RN101
1-233-576-11 RES, CHIP NETWORK 100
< SWITCH >
S101
1-771-853-11 SWITCH, DETECTION (LIMIT)
< VIBRATOR >
X101
1-767-226-11 VIBRATOR, CRYSTAL (16.9344)
************************************************************
A-4747-954-A CONTROL BOARD, COMPLETE (AEP, UK, KR)
************************
A-4747-960-A CONTROL BOARD, COMPLETE (US, CND)
************************
A-4748-774-A CONTROL BOARD, COMPLETE
(E51, HK, SP, TW, AUS)
************************
Ref. No.
Description
Remarks
C607
C608
1-126-963-11 ELECT
1-126-916-11 ELECT
4.7uF
1000uF
20.00% 50V
20.00% 6.3V
C609
C610
C611
C612
C613
1-127-876-21
1-115-339-11
1-124-584-00
1-124-234-00
1-164-156-11
CERAMIC
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
0.01uF
0.1uF
100uF
22uF
0.1uF
10%
10.00%
20%
20%
50V
50V
10V
16V
25V
C614
C615
C616
C617
C618
1-115-339-11
1-115-339-11
1-162-913-11
1-162-919-11
1-162-921-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
8PF
22PF
33PF
10.00%
10.00%
0.50PF
5%
5%
50V
50V
50V
50V
50V
C619
C620
C621
C622
C623
1-162-913-11
1-162-970-11
1-162-970-11
1-162-970-11
1-162-917-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
8PF
0.01uF
0.01uF
0.01uF
15PF
0.50PF
10%
10%
10%
5%
50V
25V
25V
25V
50V
C624
C625
C626
C627
C628
1-126-947-11
1-162-964-11
1-162-921-11
1-126-964-11
1-115-339-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
47uF
0.001uF
33PF
10uF
0.1uF
20.00%
10%
5%
20.00%
10.00%
25V
50V
50V
50V
50V
C629
C630
C631
C632
C633
1-162-927-11
1-162-927-11
1-162-282-31
1-162-282-31
1-162-927-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC
CERAMIC
CERAMIC CHIP
100PF
100PF
100PF
100PF
100PF
5%
5%
10%
10%
5%
50V
50V
50V
50V
50V
C634
C635
C636
C637
C638
1-162-927-11
1-162-927-11
1-162-927-11
1-162-927-11
1-162-927-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
100PF
100PF
100PF
100PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C639
C640
C641
C642
C643
1-162-970-11
1-162-970-11
1-126-960-11
1-126-963-11
1-115-339-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
0.01uF
0.01uF
1uF
4.7uF
0.1uF
10%
10%
20.00%
20.00%
10.00%
25V
25V
50V
50V
50V
C644
C645
C646
C647
C648
1-115-339-11
1-162-282-31
1-126-964-11
1-115-339-11
1-115-339-11
CERAMIC CHIP
CERAMIC
ELECT
CERAMIC CHIP
CERAMIC CHIP
0.1uF
100PF
10uF
0.1uF
0.1uF
10.00%
10%
20.00%
10.00%
10.00%
50V
50V
50V
50V
50V
C649
C650
C651
C652
C653
1-162-970-11
1-126-933-11
1-162-282-31
1-162-970-11
1-162-970-11
CERAMIC CHIP
ELECT
CERAMIC
CERAMIC CHIP
CERAMIC CHIP
0.01uF
100uF
100PF
0.01uF
0.01uF
10%
20.00%
10%
10%
10%
25V
16V
50V
25V
25V
< CONNECTOR >
CN601
CN602
* CN603
4-247-818-01 GUIDE (FL)
4-247-819-01 HOLDER, SENSOR
4-247-820-01 FILTER, FL
Part No.
CONTROL
1-779-294-11 CONNECTOR, FFC (LIF (NON-ZIF)) 26P
1-779-550-21 CONNECTOR, FFC (LIF (NON-ZIF)) 13P
1-770-516-31 CONNECTOR, FFC/FPC 8P
< DIODE >
< CAPACITOR >
C604
C605
C606
1-162-927-11 CERAMIC CHIP
1-162-962-11 CERAMIC CHIP
1-126-963-11 ELECT
100PF
470PF
4.7uF
5%
50V
10%
50V
20.00% 50V
D601
D602
D603
D604
8-719-010-41
8-719-991-33
8-719-991-33
8-719-991-33
DIODE UZ-5.6BSA-TP
DIODE 1SS133T-72
DIODE 1SS133T-77
DIODE 1SS133T-72
43
HCD-GP5
Ver 1.3 2004.01
CONTROL
Ref. No.
Part No.
Description
Remarks
D605
8-719-991-33 DIODE 1SS133T-72
D606
D607
D608
D609
8-719-991-33
8-719-991-33
8-719-989-91
8-719-989-91
5%
5%
1/4W
1/4W
R615
R616
R617
R618
R619
1-247-831-91
1-247-831-91
1-247-831-91
1-247-831-91
1-216-845-11
CARBON
CARBON
CARBON
CARBON
METAL CHIP
1K
1K
1K
1K
100K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/16W
R620
R621
R622
R623
R624
1-216-829-11
1-216-821-11
1-216-835-11
1-216-817-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
1K
15K
470
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R625
R626
R627
R629
R631
1-216-825-11
1-216-833-11
1-216-825-11
1-249-436-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
CARBON
METAL CHIP
2.2K
10K
2.2K
39K
22K
R632
R633
R634
R635
R636
1-216-845-11
1-216-845-11
1-216-833-11
1-216-845-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
10K
100K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R637
R638
R639
R640
R641
1-216-845-11
1-216-845-11
1-216-845-11
1-216-845-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100K
100K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R642
R643
R644
R645
R646
1-216-845-11
1-216-845-11
1-216-845-11
1-216-845-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100K
100K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
2SC2712L-TE85R
2SA1980G
2SC2712L-TE85R
2SC2712L-TE85R
2SA1981Y
R647
R648
R649
R650
R651
1-216-845-11
1-216-845-11
1-216-845-11
1-216-845-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100K
100K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
2SA1296GR- (TPE2)
DTC114EK
2SA1981Y
R652
R653
R654
R655
R656
1-216-845-11
1-216-845-11
1-216-845-11
1-216-845-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100K
100K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
3.9K
R657
R658
R659
R660
R661
1-216-845-11
1-216-845-11
1-216-835-11
1-216-845-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
15K
100K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R662
R663
R664
R665
R666
1-216-841-11
1-216-841-11
1-247-887-00
1-216-841-11
1-216-821-11
METAL CHIP
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
47K
47K
220K
47K
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/4W
1/16W
1/16W
R667
R668
R669
R670
R671
1-216-853-11
1-216-809-11
1-216-829-11
1-216-833-11
1-216-841-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
470K
100
4.7K
10K
47K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
0uH
1-518-908-11 INDICATOR TUBE, FLUORESCENT
< IC >
IC601
IC602
IC603
IC604
6-803-170-01
6-700-250-01
6-701-681-01
8-759-598-69
IC LC876764C-51E5
IC PST3445UL
IC RPM7140-V4 (g)
IC BA6956AN
< JUMPER RESISTOR >
JR601
JR602
JR604
JR607
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
0
0
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
< COIL >
L601
L602
1-410-509-11 INDUCTOR
1-410-509-11 INDUCTOR
10uH
10uH
< DIODE >
LED601 8-719-059-98 DIODE SLR-342VCT31
< TRANSISTOR >
Q601
Q602
Q603
Q604
Q605
8-729-230-49
6-550-296-01
8-729-230-49
8-729-230-49
6-550-297-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
Q606
Q607
Q608
6-550-305-01 TRANSISTOR
8-729-900-53 TRANSISTOR
6-550-297-01 TRANSISTOR
< RESISTOR >
R601
1-216-828-11 METAL CHIP
R601
1-216-833-11 METAL CHIP
R602
R603
R604
1-216-821-11 METAL CHIP
1-216-821-11 METAL CHIP
1-216-821-11 METAL CHIP
5%
1/16W
(E51, HK, SP, TW, AUS)
10K
5%
1/16W
(US, CND, AEP, UK, KR)
1K
5%
1/16W
1K
5%
1/16W
1K
5%
1/16W
R605
R606
R607
R608
R609
1-216-821-11
1-216-841-11
1-247-807-31
1-247-807-31
1-216-809-11
METAL CHIP
METAL CHIP
CARBON
CARBON
METAL CHIP
1K
47K
100
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/4W
1/4W
1/16W
R610
R611
R612
1-216-809-11 METAL CHIP
1-216-809-11 METAL CHIP
1-249-429-11 CARBON
100
100
10K
5%
5%
5%
1/16W
1/16W
1/4W
44
Remarks
1K
1K
< FLUORESCENT INDICATOR TUBE >
FL601
Description
1-247-831-91 CARBON
1-247-831-91 CARBON
DIODE 1SS133T-72
DIODE 1SS133T-72
DIODE 1N4148A-T265
DIODE 1N4148A-T265
1-412-473-21 INDUCTOR
Part No.
R613
R614
< FERRITE BEAD >
FB601
Ref. No.
5%
1/16W
5%
1/16W
5%
1/16W
5%
1/4W
5%
1/16W
(E51, HK, SP, TW, AUS)
HCD-GP5
Ver 1.3 2004.01
CONTROL
Ref. No.
Remarks
Ref. No.
HEADPHONE
LOADING
Part No.
Description
Part No.
Description
R672
R673
R674
R675
R676
1-216-841-11
1-216-298-00
1-216-833-11
1-216-837-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
47K
2.2
10K
22K
22K
5%
5%
5%
5%
5%
1/16W
1/10W
1/16W
1/16W
1/16W
R725
R726
R727
R728
R729
1-216-845-11
1-216-829-11
1-216-845-11
1-216-845-11
1-247-831-91
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
CARBON
100K
4.7K
100K
100K
1K
5%
5%
5%
5%
5%
Remarks
1/16W
1/16W
1/16W
1/16W
1/4W
R677
R678
R679
R680
R681
1-216-839-11
1-216-837-11
1-218-179-11
1-247-831-91
1-216-821-11
METAL CHIP
METAL CHIP
RES-CHIP
CARBON
METAL CHIP
33K
22K
10M
1K
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/10W
1/4W
1/16W
R734
R735
R736
1-216-838-11 METAL CHIP
1-247-879-91 CARBON
1-247-879-91 CARBON
27K
100K
100K
5%
5%
5%
1/16W
1/4W
1/4W
R682
R683
R684
R685
R686
1-249-410-11
1-216-845-11
1-249-426-11
1-216-845-11
1-218-817-11
CARBON
METAL CHIP
CARBON
METAL CHIP
RES-CHIP
270
100K
5.6K
100K
3.3
5%
5%
5%
5%
10%
1/4W F
1/16W
1/4W
1/16W
1/2W
S601
S602
S603
S604
S605
1-786-050-21
1-786-050-21
1-786-050-21
1-786-050-21
1-786-050-21
SWITCH, KEY BOARD (TUNER/BAND)
SWITCH, KEY BOARD (bB TAPE)
SWITCH, KEY BOARD (MD)
SWITCH, KEY BOARD (Z)
SWITCH, KEY BOARD (x)
R687
R688
R689
R690
R691
1-249-426-11
1-249-429-11
1-216-809-11
1-216-809-11
1-247-807-31
CARBON
CARBON
METAL CHIP
METAL CHIP
CARBON
5.6K
10K
100
100
100
5%
5%
5%
5%
5%
1/4W
1/4W
1/16W
1/16W
1/4W
S606
S607
S608
S609
S610
1-786-050-21
1-786-050-21
1-786-050-21
1-786-050-21
1-786-050-21
SWITCH, KEY BOARD (+ M>)
SWITCH, KEY BOARD (.m –)
SWITCH, KEY BOARD (~/1)
SWITCH, KEY BOARD (DISPLAY)
SWITCH, KEY BOARD
(PLAY MODE/TUNING MODE)
R692
R693
R694
R695
R696
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
S611
S612
S613
S614
S615
1-786-050-21
1-786-050-21
1-786-050-21
1-786-050-21
1-786-050-21
SWITCH, KEY BOARD (CD SYNC)
SWITCH, KEY BOARD (z REC PAUSE/START)
SWITCH, KEY BOARD (CD u)
SWITCH, KEY BOARD (DSG)
SWITCH, KEY BOARD (VOL+)
R697
R698
R699
R700
1-247-807-31
1-247-807-31
1-247-807-31
1-216-837-11
CARBON
CARBON
CARBON
METAL CHIP
100
100
100
22K
S616
1-786-050-21 SWITCH, KEY BOARD (VOL-)
R700
1-216-295-91 SHORT CHIP
5%
1/4W
5%
1/4W
5%
1/4W
5%
1/16W
(E51, HK, SP, TW, AUS)
0 (US, CND, AEP, UK, KR)
R701
1-216-833-11 METAL CHIP
10K
R702
1-216-837-11 METAL CHIP
R702
1-247-831-91 CARBON
R703
R704
1-249-425-11 CARBON
1-249-425-11 CARBON
5%
1/16W
(US, CND, AEP, UK, KR)
22K
5%
1/16W
(E51, HK, SP, TW, AUS)
1K
5%
1/4W
(US, CND, AEP, UK, KR)
4.7K
5%
1/4W F
4.7K
5%
1/4W F
R705
R706
R707
R708
R709
1-216-845-11
1-218-867-11
1-249-430-11
1-216-840-11
1-216-833-11
METAL CHIP
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
100K
6.8K
12K
39K
10K
5%
5%
5%
5%
5%
1/16W
1/10W
1/4W
1/16W
1/16W
R710
R711
R712
R713
R714
1-247-831-91
1-218-833-11
1-247-831-91
1-249-419-11
1-216-824-11
CARBON
METAL CHIP
CARBON
CARBON
METAL CHIP
1K
270
1K
1.5K
1.8K
5%
0.5%
5%
5%
5%
1/4W
1/10W
1/4W
1/4W F
1/16W
R715
R716
R717
R718
R719
1-249-422-11
1-216-828-11
1-249-427-11
1-249-430-11
1-249-419-11
CARBON
METAL CHIP
CARBON
CARBON
CARBON
2.7K
3.9K
6.8K
12K
1.5K
5%
5%
5%
5%
5%
1/4W F
1/16W
1/4W F
1/4W
1/4W F
R720
R721
R722
R723
R724
1-216-824-11
1-249-422-11
1-216-828-11
1-247-831-91
1-249-426-11
METAL CHIP
CARBON
METAL CHIP
CARBON
CARBON
1.8K
2.7K
3.9K
1K
5.6K
5%
5%
5%
5%
5%
1/16W
1/4W F
1/16W
1/4W
1/4W
< SWITCH >
< VIBRATOR >
X601
9-300-001-87 VIB, XTAL 32.768KHZ CFS-308 CT 32.768KHz
X602
1-795-880-11 VIBRATOR, CERAMIC 8.64MHz
************************************************************
1-689-576-11 HEADPHONE BOARD
*****************
< JACK >
J202
1-816-219-11 JACK, HEADPHONE (PHONES)
< COIL >
L205
1-408-117-00 INDUCTOR
10uH
< RESISTOR >
R201
1-249-409-11 CARBON
220
5%
1/4W F
R202
1-249-412-11 CARBON
390
5%
1/4W F
R203
1-249-409-11 CARBON
220
5%
1/4W F
R204
1-249-412-11 CARBON
390
5%
1/4W F
************************************************************
1-674-336-12 LOADING BOARD
**************
< CONNECTOR >
* CN151
1-568-943-11 PIN, CONNECTOR 5P
< SWITCH >
S1
1-786-203-11 SWITCH, LEVER (SLIDE)(OPEN/CLOSE)
************************************************************
45
HCD-GP5
Ver 1.3 2004.01
MAIN
Ref. No.
Part No.
Remarks
Ref. No.
A-4747-957-A MAIN BOARD, COMPLETE (AEP, UK, KR)
*********************
A-4747-962-A MAIN BOARD, COMPLETE (US, CND)
*********************
A-4748-777-A MAIN BOARD, COMPLETE
(E51, HK, SP, TW, AUS)
*********************
Description
C353
C354
1-126-956-91 ELECT
1-124-464-11 ELECT
Part No.
Description
0.1uF
0.22uF
20.00% 50V
20%
50V
Remarks
C355
C356
C357
C358
C359
1-124-464-11
1-124-464-11
1-126-957-11
1-126-963-11
1-164-315-11
ELECT
ELECT
ELECT
ELECT
CERAMIC CHIP
0.22uF
0.22uF
0.22uF
4.7uF
470PF
20%
20%
20.00%
20.00%
5.00%
50V
50V
50V
50V
50V
C360
C361
C362
C363
C364
1-162-977-11
1-162-977-11
1-164-315-11
1-164-218-11
1-164-218-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0018uF
0.0018uF
470PF
180PF
180PF
10.00%
10.00%
5.00%
0.25PF
0.25PF
50V
50V
50V
50V
50V
C367
C368
C384
C385
C387
1-164-315-11
1-164-315-11
1-162-970-11
1-162-964-11
1-162-964-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
470PF
470PF
0.01uF
0.001uF
0.001uF
5.00%
5.00%
10%
10%
10%
50V
50V
25V
50V
50V
C390
C392
C396
C397
C398
1-162-964-11
1-164-156-11
1-128-801-21
1-164-733-11
1-164-733-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.1uF
22PF
820PF
820PF
10%
50V
25V
5%
50V
10.00% 50V
10.00% 50V
C401
C402
C403
C404
C405
1-162-968-11
1-162-968-11
1-115-339-11
1-115-339-11
1-137-420-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
FILM
0.0047uF
0.0047uF
0.1uF
0.1uF
0.047uF
10%
10%
10.00%
10.00%
5.00%
50V
50V
50V
50V
100V
C406
C407
C408
C409
C410
1-137-420-11
1-119-940-51
1-119-940-51
1-128-548-11
1-128-548-11
FILM
ELECT
ELECT
ELECT
ELECT
0.047uF
4700uF
4700uF
4700uF
4700uF
5.00%
20.00%
20.00%
20.00%
20.00%
100V
50V
50V
25V
25V
C412
C413
C414
C416
C417
1-126-947-11
1-162-970-11
1-126-947-11
1-126-966-11
1-126-966-11
ELECT
CERAMIC CHIP
ELECT
ELECT
ELECT
47uF
0.01uF
47uF
33uF
33uF
20.00%
10%
20.00%
20.00%
20.00%
25V
25V
25V
50V
50V
C418
C419
C420
C421
C422
1-126-968-11
1-164-156-11
1-124-261-00
1-126-967-11
1-126-967-11
ELECT
CERAMIC CHIP
ELECT
ELECT
ELECT
100uF
0.1uF
10uF
47uF
47uF
20.00% 50V
25V
20%
50V
20.00% 50V
20.00% 50V
C424
C427
C428
C431
C432
1-124-584-00
1-164-315-11
1-164-733-11
1-164-733-11
1-124-589-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
100uF
470PF
820PF
820PF
47uF
20%
5.00%
10.00%
10.00%
20%
10V
50V
50V
50V
16V
C433
C434
C435
C436
C437
1-124-584-00
1-162-970-11
1-124-589-11
1-126-967-11
1-126-967-11
ELECT
CERAMIC CHIP
ELECT
ELECT
ELECT
100uF
0.01uF
47uF
47uF
47uF
20%
10%
20%
20.00%
20.00%
10V
25V
16V
50V
50V
C438
C439
C440
C441
C501
1-164-315-11
1-162-970-11
1-130-321-11
1-130-321-11
1-126-966-11
CERAMIC CHIP
CERAMIC CHIP
FILM
FILM
ELECT
470PF
0.01uF
0.1uF
0.1uF
33uF
5.00%
10%
5.00%
5.00%
20.00%
50V
25V
100V
100V
16V
< CAPACITOR >
C205
C206
C207
C208
C219
1-162-970-11
1-162-970-11
1-162-964-11
1-164-156-11
1-164-156-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
0.001uF
0.1uF
0.1uF
C220
C231
C301
C302
C305
1-164-156-11
1-164-156-11
1-162-964-11
1-162-964-11
1-106-361-00
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
MYLAR
0.1uF
0.1uF
0.001uF 10%
0.001uF 10%
0.0056uF 5.00%
25V
25V
50V
50V
100V
C306
C307
C308
C309
C310
1-126-923-91
1-162-970-11
1-162-979-11
1-162-979-11
1-162-979-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
220uF
0.01uF
0.0027uF
0.0027uF
0.0027uF
20.00%
10%
10.00%
10.00%
10.00%
10V
25V
50V
50V
50V
C311
C312
C313
1-164-156-11 CERAMIC CHIP
1-164-156-11 CERAMIC CHIP
1-162-964-11 CERAMIC CHIP
0.1uF
0.1uF
0.001uF
C314
C315
1-164-156-11 CERAMIC CHIP
1-124-589-11 ELECT
0.1uF
47uF
25V
25V
10%
50V
(AEP, UK, KR)
25V
20%
16V
C316
C317
C318
C319
C320
1-162-915-11
1-126-923-91
1-162-970-11
1-126-947-11
1-162-967-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
ELECT
CERAMIC CHIP
10PF
220uF
0.01uF
47uF
0.0033uF
0.5PF
20.00%
10%
20.00%
10%
50V
10V
25V
16V
50V
C321
C322
C323
C324
C325
1-162-967-11
1-126-961-11
1-126-961-11
1-164-315-11
1-162-969-11
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
CERAMIC CHIP
0.0033uF
2.2uF
2.2uF
470PF
0.0068uF
10%
20.00%
20.00%
5.00%
10%
50V
50V
50V
50V
25V
C326
C327
C328
C329
C330
1-162-969-11
1-164-315-11
1-162-923-11
1-162-923-11
1-126-947-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.0068uF
470PF
47PF
47PF
47uF
10%
5.00%
5%
5%
20.00%
25V
50V
50V
50V
25V
C331
C332
C333
C334
C335
1-126-947-11
1-164-733-11
1-126-933-11
1-164-733-11
1-164-230-11
ELECT
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
47uF
820PF
100uF
820PF
220PF
20.00%
10.00%
20.00%
10.00%
5.00%
25V
50V
16V
50V
50V
C338
C339
C341
C344
C345
1-126-160-11
1-126-160-11
1-162-968-11
1-126-947-11
1-104-658-91
ELECT
ELECT
CERAMIC CHIP
ELECT
ELECT
1uF
1uF
0.0047uF
47uF
100uF
20%
50V
20%
50V
10%
50V
20.00% 25V
20.00% 10V
(AEP, UK, KR)
C346
C351
C352
1-162-199-31 CERAMIC
1-126-963-11 ELECT
1-126-956-91 ELECT
10PF
4.7uF
0.1uF
5%
50V
20.00% 50V
20.00% 50V
46
10%
10%
10%
25V
25V
50V
25V
25V
HCD-GP5
Ver 1.3 2004.01
MAIN
Ref. No.
Part No.
Description
C502
C503
C504
C505
C506
1-162-192-31
1-162-192-31
1-162-970-11
1-113-342-11
1-163-021-91
CERAMIC
CERAMIC
CERAMIC CHIP
CERAMIC
CERAMIC CHIP
2.7PF
2.7PF
0.01uF
0.1uF
0.01uF
10.00% 50V
10.00% 50V
10%
25V
50V
10.00% 50V
Remarks
C507
C508
C509
C510
C511
1-126-157-11
1-126-157-11
1-126-968-11
1-126-961-11
1-126-961-11
ELECT
ELECT
ELECT
ELECT
ELECT
10uF
10uF
100uF
2.2uF
2.2uF
20%
20%
20.00%
20.00%
20.00%
16V
16V
50V
50V
50V
C512
C513
C514
C515
C516
1-128-817-21
1-128-817-21
1-136-230-00
1-136-230-00
1-126-947-11
CERAMIC
CERAMIC
FILM
FILM
ELECT
470PF
470PF
0.0022uF
0.0022uF
47uF
5%
5%
5.00%
5.00%
20.00%
50V
50V
100V
100V
25V
C517
C518
C519
C520
1-162-970-11
1-162-970-11
1-126-962-11
1-126-967-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
0.01uF
0.01uF
3.3uF
47uF
10%
10%
20.00%
20.00%
25V
25V
50V
50V
Ref. No.
Part No.
Description
Remarks
D429
8-719-991-33 DIODE 1SS133T-72
D430
D431
D432
D433
D434
8-719-048-55
6-500-335-01
6-500-334-01
8-719-991-33
8-719-110-09
D435
D501
8-719-991-33 DIODE 1SS133T-72
8-719-991-33 DIODE 1SS133T-72
DIODE UZ-10BSC-TP
DIODE MC2838
DIODE MC2836
DIODE 1SS133T-72
DIODE MTZJ-T-77-8.2C
< FERRITE BEAD >
< CONNECTOR >
* CN201
* CN301
CN302
CN303
CN304
CN305
1-564-520-11
1-564-709-11
1-779-294-11
1-779-281-11
1-784-776-11
PLUG, CONNECTOR 5P
PIN, CONNECTOR (SMALL TYPE) 7P
CONNECTOR, FFC (LIF (NON-ZIF)) 26P
CONNECTOR, FFC (LIF (NON-ZIF)) 13P
CONNECTOR, FFC 15P
1-568-838-11 CONNECTOR, FFC 21P
FB202
FB203
FB301
FB302
FB303
1-410-396-41
1-410-396-41
1-410-396-41
1-410-396-41
1-410-396-41
FERRITE
FERRITE
FERRITE
FERRITE
FERRITE
0.45uH
0.45uH
0.45uH
0.45uH
0.45uH
FB304
1-410-396-41 FERRITE
0.45uH
< IC >
IC201
IC201
IC301
6-703-084-01 IC STK403-030 (AEP, UK, KR)
6-704-106-01 IC STK403-040 (EXCEPT AEP, UK, KR)
6-702-895-01 IC BD3881FV
< JACK >
J201
J203
J204
1-793-478-11 JACK, PIN 2P (MD)
1-537-240-31 TERMINAL BOARD (CHECKER PIN)(SPEAKERS)
1-774-785-21 JACK, PIN 1P (SUBWOOFER)
< DIODE >
D301
D302
D303
D304
D402
8-719-991-33
8-719-010-32
8-719-923-38
8-719-010-32
6-500-382-01
DIODE 1SS133T-72
DIODE UZ-4.7BSA-TP
DIODE UZ-5.1BSB-TP (AEP, UK, KR)
DIODE UZ-4.7BSA-TP
DIODE RL203GW-TA
D403
D404
D405
D406
D407
6-500-382-01
6-500-378-01
6-500-378-01
6-500-378-01
6-500-378-01
DIODE RL203GW-TA
DIODE 1N5402GW (F20)
DIODE 1N5402GW (F20)
DIODE 1N5402GW (F20)
DIODE 1N5402GW (F20)
D408
D409
D410
D411
D412
6-500-376-01
6-500-376-01
6-500-376-01
8-719-983-35
6-500-376-01
DIODE 1N4003LES
DIODE 1N4003LES
DIODE 1N4003LES
DIODE MTZJ-T-77-33D
DIODE 1N4003LES
D413
D414
D415
D416
D417
6-500-382-01
8-719-991-33
8-719-110-09
6-500-335-01
6-500-382-01
DIODE RL203GW-TA
DIODE 1SS133T-72
DIODE MTZJ-T-72-8.2C
DIODE MC2836
DIODE RL203GW-TA
D418
D419
D420
D421
D422
8-719-923-38
8-719-991-33
8-719-991-33
8-719-109-89
8-719-921-63
DIODE UZ-5.1BSB-TP
DIODE 1SS133T-72
DIODE 1SS133T-72
DIODE MTZJ-T-72-5.6B
DIODE MTZJ-T-77-7.5B
D423
D425
D427
D428
6-500-382-01
8-719-110-09
6-500-382-01
8-719-991-33
DIODE RL203GW-TA
DIODE MTZJ-T-77-8.2C
DIODE RL203GW-TA
DIODE 1SS133T-72
< JUMPER RESISTOR >
JR301
1-216-295-91 SHORT CHIP
0
< COIL >
L201
L202
L203
L204
L301
1-456-107-11
1-456-107-11
1-408-117-00
1-408-117-00
1-456-094-11
COIL, AIR-CORE
COIL, AIR-CORE
INDUCTOR
10uH
INDUCTOR
10uH
TRANSFORMER, BIAS OSCILLATION
L302
1-408-032-31 INDUCTOR
36uH
< CABLE HOLDER >
PN401
1-784-584-11 HOLDER, CABLE (2.5mm PITCH)
< RESISTOR >
PR501
1-220-890-11 METAL
0.22
10%
3W
< TRANSISTOR >
Q301
Q302
Q303
Q304
Q305
6-550-333-01
6-550-333-01
6-550-333-01
8-729-120-28
8-729-045-62
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC5343GL
2SC5343GL
2SC5343GL
2SC3052F-T1-LF
2SK2158-T2B
Q306
Q307
Q308
Q309
Q310
8-729-028-83
8-729-045-62
8-729-045-62
8-729-216-22
8-729-216-22
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
DTA124EUA-T106
2SK2158-T2B
2SK2158-T2B
2SA1162-G
2SA1162-G
47
HCD-GP5
Ver 1.3 2004.01
MAIN
Ref. No.
Part No.
Description
Q311
Q312
Q313
Q314
Q315
8-729-028-83
1-801-806-11
1-801-806-11
8-729-120-28
8-729-120-28
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
DTA124EUA-T106
DTC144EK
DTC144EK
2SC3052F-T1-LF
2SC3052F-T1-LF
Remarks
Ref. No.
R312
1-247-847-91 CARBON
Part No.
Description
4.7K
5%
Remarks
R313
1-216-813-11 METAL CHIP
220
5%
R314
1-216-813-11 METAL CHIP
220
Q316
Q401
Q402
Q403
Q404
6-550-296-01
8-729-230-49
8-729-024-93
6-550-333-01
6-550-293-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SA1980G
2SC2712L-TE85R
2SB1370-E
2SC5343GL
2SK2937
R315
R316
R317
1-216-828-11 METAL CHIP
1-216-857-11 METAL CHIP
1-216-840-11 METAL CHIP
3.9K
1M
39K
1/16W
(AEP, UK, KR)
5%
1/16W
(AEP, UK, KR)
5%
1/16W
5%
1/16W
5%
1/16W
Q405
Q406
Q407
Q408
Q409
8-729-230-49
8-729-120-28
6-550-296-01
6-550-293-01
6-550-289-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC2712L-TE85R
2SC3052F-T1-LF
2SA1980G
2SK2937
2SA1235F
R318
R321
R322
R323
R324
1-216-817-11
1-216-809-11
1-216-809-11
1-216-852-11
1-216-822-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
470
100
100
390K
1.2K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
Q410
Q411
Q415
Q416
Q417
8-729-120-28
6-550-289-01
8-729-900-53
8-729-024-93
6-550-333-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC3052F-T1-LF
2SA1235F
DTC114EK
2SB1370-E
2SC5343GL
R325
R326
R327
R328
R329
1-216-836-11
1-216-836-11
1-216-822-11
1-216-852-11
1-216-835-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
18K
18K
1.2K
390K
15K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
Q418
Q419
Q501
Q502
Q503
6-550-333-01
6-550-344-01
6-550-640-01
8-729-016-42
8-729-230-49
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC5343GL
2SC3266GR
KTA1267
KTC3199GR-TP
2SC2712G-TE85R
R330
R331
R332
R333
R334
1-216-833-11
1-216-864-11
1-216-833-11
1-247-847-91
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
CARBON
METAL CHIP
10K
0
10K
4.7K
4.7K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/4W
1/16W
Q504
Q505
Q506
Q507
Q508
8-729-230-49
8-729-230-49
8-729-216-22
8-729-230-49
8-729-230-49
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC2712G-TE85R
2SC2712G-TE85R
2SA1162G-TE85R
2SC2712G-TE85R
2SC2712G-TE85R
R336
R337
R338
R339
R340
1-249-409-11
1-249-413-11
1-249-413-11
1-247-807-31
1-216-826-11
CARBON
CARBON
CARBON
CARBON
METAL CHIP
220
470
470
100
2.7K
5%
5%
5%
5%
5%
1/4W F
1/4W F
1/4W F
1/4W
1/16W
Q509
Q510
8-729-230-49 TRANSISTOR
8-729-216-22 TRANSISTOR
2SC2712G-TE85R
2SA1162G-TE85R
R341
R342
R343
R344
R345
1-216-830-11
1-216-833-11
1-216-826-11
1-216-833-11
1-216-843-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
5.6K
10K
2.7K
10K
68K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R346
R347
R348
R349
R350
1-216-827-11
1-216-843-11
1-216-827-11
1-249-429-11
1-216-822-11
METAL CHIP
METAL CHIP
METAL CHIP
CARBON
METAL CHIP
3.3K
68K
3.3K
10K
1.2K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/4W
1/16W
R351
R352
R353
R354
R355
1-216-822-11
1-249-429-11
1-216-827-11
1-216-837-11
1-216-827-11
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
METAL CHIP
1.2K
10K
3.3K
22K
3.3K
5%
5%
5%
5%
5%
1/16W
1/4W
1/16W
1/16W
1/16W
R356
R357
R358
R359
R360
1-216-837-11
1-216-826-11
1-216-829-11
1-216-826-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22K
2.7K
4.7K
2.7K
4.7K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R361
R362
R363
R364
R365
1-216-820-11
1-216-833-11
1-216-821-11
1-216-821-11
1-216-825-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
820
10K
1K
1K
2.2K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R366
R367
R368
R369
R370
1-216-825-11
1-216-824-11
1-216-833-11
1-216-821-11
1-216-836-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
1.8K
10K
1K
18K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/4W
< RESISTOR >
R205
R206
R207
R208
R209
1-249-389-11
1-216-793-11
1-249-389-11
1-216-793-11
1-216-847-11
CARBON
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
4.7
4.7
4.7
4.7
150K
5%
5%
5%
5%
5%
1/4W F
1/10W
1/4W F
1/10W
1/16W
R210
R212
R213
R214
R215
1-216-847-11
1-216-832-11
1-216-821-11
1-216-821-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
150K
8.2K
1K
1K
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R216
R217
R218
R301
R302
1-216-833-11
1-249-393-11
1-249-393-11
1-216-842-11
1-216-829-11
METAL CHIP
CARBON
CARBON
METAL CHIP
METAL CHIP
10K
10
10
56K
4.7K
5%
5%
5%
5%
5%
1/16W
1/4W F
1/4W F
1/16W
1/16W
R303
R304
R305
R306
R307
1-216-840-11
1-247-847-91
1-216-825-11
1-216-836-11
1-216-836-11
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
METAL CHIP
39K
4.7K
2.2K
18K
18K
5%
5%
5%
5%
5%
1/16W
1/4W
1/16W
1/16W
1/16W
R308
R309
R310
R311
1-249-392-11
1-216-828-11
1-216-835-11
1-216-828-11
CARBON
METAL CHIP
METAL CHIP
METAL CHIP
8.2
3.9K
15K
3.9K
5%
5%
5%
5%
1/4W F
1/16W
1/16W
1/16W
48
HCD-GP5
Ver 1.3 2004.01
MAIN
Ref. No.
Part No.
Description
R371
R372
R373
R374
R375
1-216-836-11
1-216-824-11
1-216-826-11
1-216-826-11
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
18K
1.8K
2.7K
2.7K
0
5%
5%
5%
5%
5%
Remarks
1/16W
1/16W
1/16W
1/16W
1/16W
R377
R378
R389
R390
R391
1-249-434-11
1-249-434-11
1-216-840-11
1-216-817-11
1-216-789-11
CARBON
CARBON
METAL CHIP
METAL CHIP
METAL CHIP
27K
27K
39K
470
2.2
5%
5%
5%
5%
5%
1/4W
1/4W
1/16W
1/16W
1/16W
R394
R395
R396
R397
R401
1-216-830-11
1-216-825-11
1-216-809-11
1-216-830-11
1-249-430-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
CARBON
5.6K
2.2K
100
5.6K
12K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/4W
R402
R403
R404
R405
R406
1-216-802-11
1-216-083-00
1-216-083-00
1-218-446-11
1-249-381-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
CARBON
27
27K
27K
1
1
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/4W F
R407
R408
R412
R413
R414
1-218-446-11
1-249-381-11
1-216-833-11
1-216-829-11
1-249-413-11
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
CARBON
1
1
10K
4.7K
470
5%
5%
5%
5%
5%
1/10W
1/4W F
1/16W
1/16W
1/4W F
R415
R416
R417
R419
R421
1-216-844-11
1-216-807-11
1-216-829-11
1-216-833-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
82K
68
4.7K
10K
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R422
R423
R424
R425
R427
1-216-813-11
1-216-817-11
1-247-883-00
1-216-827-11
1-216-833-11
METAL CHIP
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
220
470
150K
3.3K
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/4W
1/16W
1/16W
R428
R429
R430
R431
R432
1-216-829-11
1-249-413-11
1-216-845-11
1-216-797-11
1-247-847-91
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
CARBON
4.7K
470
100K
10
4.7K
5%
5%
5%
5%
5%
1/16W
1/4W F
1/16W
1/16W
1/4W
R433
R434
R435
R436
R437
1-216-817-11
1-249-422-11
1-249-422-11
1-216-797-11
1-216-861-11
METAL CHIP
CARBON
CARBON
METAL CHIP
METAL CHIP
470
2.7K
2.7K
10
2.2M
5%
5%
5%
5%
5%
1/16W
1/4W F
1/4W F
1/16W
1/16W
R438
R439
R440
R441
R442
1-216-049-11
1-216-057-00
1-216-057-00
1-216-057-00
1-216-049-11
RES-CHIP
METAL CHIP
METAL CHIP
METAL CHIP
RES-CHIP
1K
2.2K
2.2K
2.2K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R444
R445
R447
R449
R450
1-216-827-11
1-216-073-91
1-216-218-91
1-216-218-91
1-216-833-11
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
3.3K
10K
6.8K
6.8K
10K
5%
5%
5%
5%
5%
1/16W
1/10W
1/8W
1/8W
1/16W
R451
R452
R453
1-216-833-11 METAL CHIP
1-216-841-11 METAL CHIP
1-216-841-11 METAL CHIP
10K
47K
47K
5%
5%
5%
1/16W
1/16W
1/16W
Ref. No.
Part No.
TRANSFORMER
Description
Remarks
R454
R455
1-216-829-11 METAL CHIP
1-247-847-91 CARBON
4.7K
4.7K
5%
5%
1/16W
1/4W
R456
R457
R458
R459
R460
1-216-817-11
1-216-841-11
1-216-841-11
1-216-829-11
1-247-847-91
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
CARBON
470
47K
47K
4.7K
4.7K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/4W
R461
R465
R466
R467
R468
1-216-817-11
1-216-813-11
1-216-829-11
1-216-807-11
1-249-429-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
CARBON
470
220
4.7K
68
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/4W
R469
R470
R471
R474
R501
1-216-817-11
1-247-831-91
1-216-837-11
1-216-821-11
1-247-873-91
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
CARBON
470
1K
22K
1K
56K
5%
5%
5%
5%
5%
1/16W
1/4W
1/16W
1/16W
1/4W
R502
R503
R504
R505
R506
1-247-873-91
1-249-429-11
1-216-057-00
1-216-837-11
1-216-833-11
CARBON
CARBON
METAL CHIP
METAL CHIP
METAL CHIP
56K
10K
2.2K
22K
10K
5%
5%
5%
5%
5%
1/4W
1/4W
1/10W
1/16W
1/16W
R507
R508
R509
R510
R512
1-216-833-11
1-247-879-91
1-247-879-91
1-216-848-11
1-249-430-11
METAL CHIP
CARBON
CARBON
METAL CHIP
CARBON
10K
100K
100K
180K
12K
5%
5%
5%
5%
5%
1/16W
1/4W
1/4W
1/16W
1/4W
R513
R514
R515
R516
R518
1-215-863-11
1-216-824-11
1-216-824-11
1-216-825-11
1-216-841-11
METAL OXIDE
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
1.8K
1.8K
2.2K
47K
5%
5%
5%
5%
5%
1W
1/16W
1/16W
1/16W
1/16W
R519
R520
R521
R522
R523
1-216-857-11
1-216-833-11
1-247-831-91
1-216-842-11
1-216-842-11
METAL CHIP
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
1M
10K
1K
56K
56K
5%
5%
5%
5%
5%
1/16W
1/16W
1/4W
1/16W
1/16W
R524
R525
R526
R527
R528
1-216-821-11
1-216-821-11
1-247-871-91
1-216-829-11
1-216-829-11
METAL CHIP
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
1K
1K
47K
4.7K
4.7K
5%
5%
5%
5%
5%
1/16W
1/16W
1/4W
1/16W
1/16W
R529
R530
R531
R532
R533
1-216-826-11
1-216-826-11
1-216-833-11
1-218-867-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.7K
2.7K
10K
6.8K
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/10W
1/16W
R534
1-216-857-11 METAL CHIP
1M
5%
1/16W
R535
1-216-845-11 METAL CHIP
100K
5%
1/16W
************************************************************
1-689-574-11 TRANSFORMER BOARD
*******************
< CAPACITOR >
C801
1-126-941-11 ELECT
470uF
20.00% 25V
49
HCD-GP5
Ver 1.5
TRANSFORMER
Ref. No.
Part No.
Description
Remarks
< CONNECTOR >
* CN801
CN802
1-564-512-11 PLUG, CONNECTOR 9P
1-564-321-00 PIN, CONNECTOR (3.96mm PITCH) 2P
< DIODE >
D801
D802
D803
D804
8-719-991-33
8-719-991-33
8-719-991-33
8-719-991-33
DIODE 1SS133T-72
DIODE 1SS133T-72
DIODE 1SS133T-72
DIODE 1SS133T-72
< COIL >
0 L801
1-402-663-11 TRANSFORMER, LINE FILTER (LFT)
< TRANSFORMER >
0 PT802
0 PT802
0 PT802
1-439-772-11 TRANSFORMER, POWER
(E51, HK, SP, TW, AUS)
1-439-781-11 TRANSFORMER, POWER (US, CND)
1-443-041-11 TRANSFORMER, POWER (AEP, UK, KR)
< RESISTOR >
0 R803
1-219-776-11 CARBON
2.2M
10%
1/2W
(EXCEPT E51, TW)
< RELAY >
0 RY801
1-755-276-11 RELAY, POWER
< SWITCH >
0 SW801 1-786-404-11 SELECTOR, VOLTAGE (SWS-2201)(E51)
************************************************************
MISCELLANEOUS
**************
2
2
3
3
3
1-827-731-11
1-828-984-11
1-693-619-11
1-693-620-11
1-693-624-11
WIRE (FLAT TYPE)(11 CORE)(EXCEPT AEP,UK)
WIRE (FLAT TYPE)(15 CORE)(AEP,UK)
TUNER (FM/AM)(AEP, UK, KR)
TUNER (FM/AM)(AUS, E51, HK, SP, TW)
TUNER (FM/AM)(US, CND)
05
05
05
6
72
1-555-795-00
1-769-079-22
1-783-532-11
1-827-714-11
1-829-747-11
CORD, POWER (EXCEPT US, CND, TW, KR)
CORD, POWER (KR)
CORD, POWER (US, CND, TW)
WIRE (FLAT TYPE)(21 CORE)
WIRE (FLAT TYPE)(26 CORE)
73
173
0 601
0 PT801
0 PT801
1-796-351-51
1-757-055-11
A-4735-357-A
1-443-032-11
1-443-033-11
MECHANISM, SINGLE CASSETTE
WIRE, PARALLEL (FFC)(16 CORE)
BASE ASSY, OP (KSM-213D)
TRANSFORMER, POWER (US, CND)
TRANSFORMER, POWER (AEP, UK)
0 PT801
0 PT801
0 PT801
1-443-034-11 TRANSFORMER, POWER (HK, SP, AUS)
1-443-036-11 TRANSFORMER, POWER (KR)
––––––––––– TRANSFORMER, POWER (E51,TW)
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
50
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
HCD-GP5
MEMO
51
HCD-GP5
REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the upper right on the revised page allows you to jump to the next revised
page.
Ver.
Date
Description of Revision
1.0
2003.06
New
1.1
2003.07
Addition of Singapore, Hong Kong, Chilean, Peruvian and Australian
models
1.2
2003.11
Deletion of 3-10. KSS-213D in DISASSEMBLY.
Change of Part No. for Ref. No. 601 (KSM-213D)
1.3
2004.01
Addition of Korean and Taiwan models
1.4
2004.08
Change of Part No. for PT801 and PT802
1.5
2004.10
Addition of FLAT WIRE for Ref.No. 2, 6 and 72
(SPM-03061)
(SPM-04075)
(SPM-04133)