Download Electrical Systems Service Manual Body Builder - Home

BODY BUILDER WIRING FOR
STOP/TAIL/TURN LIGHTS
Table 56 – Electrical Description of 08TME
Circuit Description
Fused
Available Current
Color
GND
Tail Lamp
Right Turn
Left Turn
Marker
Stop
Center Pin
-20
15
15
20
30
30
-20
15
15
20
30
30
White
Brown
Green
Yellow
Black
Red
Blue
Circuit Description
Fused
Available Current
Color
GND
Tail Lamp
Right Turn
Left Turn
Marker
Stop
Center Pin
-20
15
15
20
-30
-20
15
15
20
Not Provided
30
White
Brown
Green
Yellow
Black
-Blue
Table 57 – Electrical Description of 08TMG
TESTING
08TME
1. Turn on vehicle headlights.
2. Verify that the tail lights circuit (brown wire, top left cavity on trailer socket) has battery voltage levels
present.
3. Verify that trailer marker circuit (black wire, top right cavity on trailer socket) has battery voltage levels
present.
4. Turn off vehicle headlights.
5. Turn on vehicle right turn lamp.
6. Verify that the trailer right turn lamp circuit (green wire, bottom left cavity on trailer socket) is cycling
between battery voltage and GND.
7. Turn off vehicle right turn lamp.
8. Turn on vehicle left turn lamp.
9. Verify that the trailer left turn lamp circuit (yellow wire, bottom right cavity on trailer socket) is cycling
between battery voltage and GND.
10. Turn off vehicle left turn lamp.
11. Press the vehicle brake pedal.
12. Verify that the trailer brake light circuit (red wire, bottom center cavity on trailer socket) has battery voltage
levels present when the IGN key is in the accessory position.
13. Verify that trailer brake circuit (Blue wire, center cavity on trailer socket) has battery voltage levels present.
14. Release brake pedal.
08TMG
1. Turn on vehicle headlights.
2. Verify that the tail lights circuit (brown wire, top left cavity on trailer socket) has battery voltage levels
present.
3. Verify that trailer marker circuit (black wire, top right cavity on trailer socket) has battery voltage levels
present.
4. Turn off vehicle headlights.
5. Turn on vehicle right turn lamp.
SECTION 13 - PAGE 20
October 2012
Electrical Data Body Builder Book