Download SERVICE MANUAL - Wiki Karat

HCD-RG490/RG590
SERVICE MANUAL
UK Model
HCD-RG590
E Model
Ver. 1.0 2006.02
HCD-RG490/RG590
• HCD-RG490 is the amplifier, CD player, tape
deck and tuner section in MHC-RG490S.
• HCD-RG590 is the amplifier, CD player, tape
deck and tuner section in MHC-RG590S.
Photo: HCD-RG590 (Except UK model)
Model Name Using Similar Mechanism
CD Mechanism Type
CD
Section
Base Unit Name
Optical Pick-up Block Name
TAPE
Section
Model Name Using Similar Mechanism
Tape Transport Mechanism Type
HCD-RG270
CDM74KF-K6BD83S (Except Mexican model)/
CDM74KF-F1BD84 (Mexican model)
BU-K6BD83S-WOD (Except Mexican model)/
BU-F1BD84 (Mexican model)
KSM-213DCP (Except Mexican model)/
KSM-215DCP (Mexican model)
NEW
CWN42FF609
SPECIFICATIONS
Amplifier section
European model:
HCD-RG590
Front speaker
DIN power output (rated): 110 + 110 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference): 145 + 145 watts (6 ohms at
1 kHz, 10% THD)
Music power output (reference): 290 +
290 watts (6 ohms at 1 kHz, 10% THD)
Subwoofer
DIN power output (rated): 130 watts
(6 ohms at 80 Hz, DIN)
Continuous RMS power output
(reference): 170 watts (6 ohms at 80 Hz,
10% THD)
Music power output (reference): 340 watts
(6 ohms at 80 Hz, 10% THD)
Other models:
HCD-RG590
The following are measured at AC 220 V, 50 Hz
(Argentine model), AC 120 or 127 V, 60 Hz
(Mexican model), AC 120, 220 or 240 V,
50/60 Hz (other models)
Front speaker:
DIN power output (rated): 110 + 110 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
145 + 145 W (6 ohms at 1 kHz, 10% THD)
Subwoofer:
DIN power output (rated): 130 W
(6 ohms at 80 Hz, DIN)
Continuous RMS power output (reference):
170 W (6 ohms at 80 Hz, 10% THD)
HCD-RG490
Front speaker
The following are measured at AC 120, 127, 220,
240 V 50/60 Hz
DIN power output (rated): 95 + 95 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference): 125 + 125 watts (6 ohms at
1 kHz, 10% THD)
Subwoofer
DIN power output (rated): 120 watts
(6 ohms at 80 Hz, DIN)
Continuous RMS power output
(reference): 150 watts (6 ohms at 80 Hz,
10% THD)
Inputs:
AUDIO IN (stereo mini jack): voltage
250 mV, impedance 47 kilohms
MIC (phone jack) (Latin American
model only): sensitivity 1 mV, impedance
10 kilohms
Outputs:
PHONES (stereo mini jack): accepts
headphones of 8 ohms or more
VIDEO OUT (phono jack) (Mexican
model only): max. output level 1Vpp, unbalanced, Sync negative, load
impedance 75 ohms
SPEAKER: accepts impedance of 6 to
16 ohms
SUBWOOFER OUT: accepts
impedance of 6 to 16 ohms
– Continued on next page –
COMPACT DISC DECK RECEIVER
9-887-053-01
2006B05-1
© 2006.02
Sony Corporation
Personal Audio Division
Published by Sony Techno Create Corporation
HCD-RG490/RG590
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission duration: continuous
Laser Output*: Less than 44.6µW
*This output is the value measurement at a
distance of 200mm from the objective lens
surface on the Optical Pick-up Block with 7mm
aperture.
Frequency response: 20 Hz − 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Tape deck section
Recording system: 4-track 2-channel, stereo
Frequency response: 50 − 13,000 Hz (±3 dB),
using Sony TYPE I cassettes
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section:
Tuning range
87.5 − 108.0 MHz (50 kHz step)
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
Tuning range
Pan-American model:
530 − 1,710 kHz (with 10 kHz tuning interval)
531 − 1,710 kHz (with 9 kHz tuning interval)
European model:
531 − 1,602 kHz (with 9 kHz tuning interval)
Other models:
530 − 1,710 kHz (with 10 kHz tuning interval)
531 − 1,602 kHz (with 9 kHz tuning interval)
Antenna: AM loop antenna, external antenna
terminal
Intermediate frequency: 450 kHz
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
This appliance
is classified
as a CLASS 1
LASER product.
This marking is
located on the rear
exterior.
General
Power requirements
European model: AC 230 V, 50/60 Hz
Mexican model: AC 127 V, 60 Hz
Argentine model: AC 220 V, 50/60 Hz
Other models: AC 120, 220 or 230 − 240 V,
50/60 Hz, Adjustable with voltage selector
Power consumption
European model:
HCD-RG590: 205 watts
Mexican model:
HCD-RG490: 240 watts
Other models:
HCD-RG590: 205 watts
HCD-RG490: 245 watts
Dimensions (w/h/d) (excl. speakers): Approx. 280
× 328 × 412.3 mm
Mass (excl. speakers)
European model:
HCD-RG590: Approx. 9.5 kg
Other models:
HCD-RG590: Approx. 9.7 kg
HCD-RG490: Approx. 9.5 kg
Design and specifications are subject to change
without notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
2
HCD-RG490/RG590
TABLE OF CONTENTS
1.
SERVICING NOTES ............................................... 4
2.
GENERAL ................................................................... 5
3.
DISASSEMBLY
3-1.
3-2.
3-3.
3-4.
3-5
3-13.
3-14.
3-15.
Disassembly Flow ...........................................................
Case (Side-L), Case (Side-R) ..........................................
Case (Top) .......................................................................
LID (CD) .........................................................................
CD Mechanism Deck
(CDM74KF-K6BD83S: Except Mexican model)
(CDM74KF-F1BD84: Mexican model) ..........................
Front Panel Block ............................................................
Mecha Deck (CWN42FF609) .........................................
Back Panel Section ..........................................................
MAIN Board ....................................................................
BD Board (Mexican model),
CD Board (Except Mexican model) ................................
DRIVE Board, SW Board ...............................................
Optical Pick-up Block
(KSM-213DCP: Except Mexican model)
(KSM-215DCP: Mexican model) ...................................
SENSOR Board ...............................................................
MOTOR (TB) Board .......................................................
MOTOR (LD) Board .......................................................
4.
TEST MODE .............................................................. 16
5.
MECHANICAL ADJUSTMENTS ....................... 19
6.
ELECTRICAL ADJUSTMENTS ......................... 20
7.
DIAGRAMS
7-1.
7-2.
7-3.
7-4.
Block Diagram – CD SERVO Section – .........................
Block Diagram – MAIN Section – ..................................
Block Diagram – AMP/VIDEO Section – ......................
Block Diagram
– PANEL/POWER SUPPLY Section – ...........................
Printed Wiring Board – CD Board
(Except RG490: MX/RG590: MX models) – .................
Schematic Diagram – CD Board
(Except RG490: MX/RG590: MX models) – .................
Printed Wiring Board – BD Board
(RG490: MX/RG590: MX models) – .............................
Schematic Diagram – BD Board
(RG490: MX/RG590: MX models) – .............................
Printed Wiring Boards – CHANGER Section – ..............
Schematic Diagram – CHANGER Section – ..................
Printed Wiring Board – DECK Board – ..........................
Schematic Diagram – DECK Board – .............................
Printed Wiring Board – MAIN Board
(Except RG490: MX/RG590: MX models) – .................
Schematic Diagram – MAIN Board (1/3)
(Except RG490: MX/RG590: MX models) – .................
Schematic Diagram – MAIN Board (2/3)
(Except RG490: MX/RG590: MX models) – .................
Schematic Diagram – MAIN Board (3/3)
(Except RG490: MX/RG590: MX models) – .................
Printed Wiring Board – MAIN Board
(RG490: MX/RG590: MX models) – .............................
Schematic Diagram – MAIN Board (1/3)
(RG490: MX/RG590: MX models) – .............................
Schematic Diagram – MAIN Board (2/3)
(RG490: MX/RG590: MX models) – .............................
3-6.
3-7.
3-8.
3-9.
3-10.
3-11.
3-12.
7-5.
7-6.
7-7.
7-8.
7-9.
7-10.
7-11.
7-12.
7-13.
7-14.
7-15.
7-16.
7-17.
7-18.
7-19.
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
23
24
25
26
7-20. Schematic Diagram – MAIN Board (3/3)
(RG490: MX/RG590: MX models) – .............................
7-21. Printed Wiring Board – MIC. AUX. HP Board – ............
7-22. Schematic Diagram – MIC. AUX. HP Board – ...............
7-23. Printed Wiring Board – POWER Board (RG490) – ........
7-24. Schematic Diagram – POWER Board (RG490) – ..........
7-25. Printed Wiring Board – POWER Board (RG590) – ........
7-26. Schematic Diagram – POWER Board (RG590) – ..........
7-27. Printed Wiring Boards – SUB WOOFER Section – ........
7-28. Schematic Diagram – SUB WOOFER Section – ............
7-29. Printed Wiring Boards – CD-G Section
(RG490: MX/RG590: MX models) – .............................
7-30. Schematic Diagram – CD-G Section
(RG490: MX/RG590: MX models) – .............................
7-31. Printed Wiring Board – PANEL Board – ........................
7-32. Printed Wiring Boards – KEY Section – .........................
7-33. Schematic Diagram – PANEL/KEY Section – ...............
7-34. Printed Wiring Board
– TRANSFORMER Board (RG490) – ...........................
7-35. Schematic Diagram
– TRANSFORMER Board (RG490) – ...........................
7-36. Printed Wiring Board
– TRANSFORMER Board (RG590) – ...........................
7-37. Schematic Diagram
– TRANSFORMER Board (RG590) – ...........................
8.
43
44
45
46
47
48
49
50
51
52
53
54
55
56
58
59
60
61
EXPLODED VIEWS
8-1.
8-2.
8-3.
8-4.
8-5.
8-6.
8-7.
8-8.
Case Section ....................................................................
PANEL Board Section .....................................................
LID (Top) Section ............................................................
Front Panel Section .........................................................
MAIN Board Section .......................................................
POWER Board, SUB WOOFER Board Section .............
Chassis Section ................................................................
CD Mechanism Deck Section-1
(CDM74KF-K6BD83S) (Except Mexican model)/
(CDM74KF-F1BD84) (Mexican model) ........................
8-9. CD Mechanism Deck Section-2
(CDM74KF-K6BD83S) (Except Mexican model)/
(CDM74KF-F1BD84) (Mexican model) ........................
78
79
80
81
82
83
84
85
86
28
9.
ELECTRICAL PARTS LIST ................................ 87
29
30
• Abbreviation
MX: Mexican model
31
32
33
34
35
36
37
38
39
40
41
42
3
HCD-RG490/RG590
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
RELEASING THE ANTITHEFT LOCK
The disc table lock function for the antitheft of an demonstration
disc in the store is equipped.
Releasing Procedure :
1. Press the I/1 button to turn the power on.
2. While pressing the x button, press the A button until
“UNLOCKED” displayed on the fluorescent indicator tube
(around 5 seconds).
Note: When “LOCKED” is displayed, the antitheft lock is not released by
turning power on/off with the I/1 button.
NOTES ON REPLACEMENT OF IC901 ON THE MAIN
BOARD
IC901 on the MAIN board cannot exchange with single. When IC901
is damaged, exchange the entire mounted board.
4
MODEL IDENTIFICATION
– Back Panel –
Model number label
Label indication
2-664-523-0[] CED
2-664-524-0[] E3
2-664-527-0[] E51
2-664-528-0[] AR
2-664-529-0[] MX4
2-664-535-0[] E3
2-664-538-0[] E51
Model
RG590: UK
RG590: E3
RG590: E51
RG590: AR
RG590: MX
RG490: E3
RG490: E51
2-664-540-0[] MX4
2-680-569-0[] E2
2-680-570-0[] E2
RG490: MX
RG590: E2
RG490: E2
• Abbreviation
AR
: Argentina model
E2
: 120V AC area in E model
E3
: 240V AC area in E model
E51
: Chilean and Peruvian models
MX
: Mexican model
HCD-RG490/RG590
SECTION 2
GENERAL
This section is extracted from
instruction manual.
HCD-RG490/RG590: UK model
Guide to parts and
controls
4 SUBWOOFER indicator
Unit
5 SUBWOOFER button
Lights up when the subwoofer is turned
on.
Press to turn on and off the subwoofer.
6 Mexican model:
Unit: KARAOKE button
Press to activate the karaoke mode.
qd Latin American model only:
MIC jack
Connect the microphone. Mexican model
comes with 2 microphone jacks.
MIC LEVEL
Turn to adjust the microphone volume.
Mexican model only:
ECHO LEVEL
Turn to adjust the echo level.
Remote: DISPLAY button
Press to change the information on the
display.
Other models:
DISPLAY button
Press to change the information on the
display.
7 ILLUMINATION button
Press to change the illumination pattern
around the VOLUME control qf.
Remote
8 Buttons for synchro recording or
manual recording
REC PAUSE/START button,
CD SYNC button
Press to record on a tape.
9 PUSH Z
Press to insert or eject a tape.
q; Playback buttons
Unit: NX (play/pause) button
Remote: N (play) button,
X (pause) button
qf Unit: VOLUME control
Turn to adjust the volume.
Remote: VOLUME +/– button
Press to adjust the volume.
qg EQ BAND button
Press to select the frequency band.
qh ENTER button
Press to enter the settings.
qj Sound buttons
Unit: GROOVE button,
SURROUND button
Remote: EQ button
Press to select the sound.
qk A (open/close) button
Press to insert and eject a disc.
ql DISC 1 – 3 button
Press to select a disc. Press to switch to the
CD function from other function.
Press to start or pause playback.
Unit: DISC SKIP/EX-CHANGE
button
x (stop) button
Press to select a disc. Press to exchange a
disc while playing.
Press to stop playback.
./> (go back/go forward)
Remote: DISC SKIP button
Press to select a disc.
Press to select a track or file.
w; Remote sensor
This manul mainly explains operations using
the remote, but the same operations can also be
performed using the buttons on the unit having
the same or similar names.
1 ?/1 (power) button
Press to turn on the system.
2 STANDBY indicator
Lights up when the system is turned off.
Unit: TUNING +/– button
Remote: +/– (tuning) button
Press to tune in the desired station.
+/– (select folder) button
Press to select a folder on an MP3 disc.
m/M (rewind/fast forward)
button
wa CLOCK/TIMER SELECT button
CLOCK/TIMER SET button
Press to set the clock and the timers.
ws REPEAT/FM MODE button
Press to listen to a disc, a single track
or file repeatedly. Press to select the FM
reception mode (monaural or stereo).
Press to find a point in a track or file.
wd Battery compartment lid
Press to select the CD function.
MULTI JOG dial (./> (go
back/go forward), +/– (tuning))
wf CLEAR button
TUNER/BAND button
Turn to select a track or file. Turn to
tune in the desired station. (Same as the
./>, +/– buttons on the remote)
3 CD button
Press to select the TUNER function. Press
to select FM or AM reception mode.
Unit: TAPE A/B button
Remote: TAPE button
Press to select the TAPE function. Press to
select TAPE A or TAPE B.
qa PHONES jack
Connect the headphones.
qs AUDIO IN jack
Connect to an audio component.
Press to delete a pre-programmed track.
wg TUNER MEMORY button
Press to preset the radio station.
wh PLAY MODE/TUNING MODE
button
Press to select the play mode of a CD,
MP3 or tape.
Press to select the tuning mode.
AUDIO IN button
Press to select the AUDIO IN function.
wj SLEEP button
Press to set the Sleep Timer.
FUNCTION button
Press to select the function.
5
HCD-RG490/RG590
EXCEPT HCD-RG490/RG590: UK model
Basic Operations
Adjusting the sound
To adjust the volume
Press VOLUME +/− on the remote (or turn the
VOLUME control on the unit) qs.
To add a sound effect
To
Press
Reinforce the bass and
create a more powerful
sound
GROOVE wd on the unit
repeatedly until “GROOVE”
appears.
Set the surround effect
SURROUND wd on the unit
repeatedly until “SURR”
appears.
EQ on the remote (or
PRESET EQ on the unit)
wd repeatedly. To cancel,
press EQ on the remote (or
PRESET EQ on the unit) wd
repeatedly until “EQ OFF”
appears.
Select the preset sound
effect
* Mexican model: KARAOKE button
Other models: DISPLAY button
• The maximum number of:
− folders is 150 (including the root folder).
− MP3 files is 255.
− MP3 files and folders that can be contained on a single disc is 300.
− folder levels (the tree structure of files) is 8.
• Compatibility with all MP3 encoding/writing software, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
Notes on playing multisession discs
• If the disc begins with a CD-DA (or MP3) session, it is recognized
as a CD-DA (or MP3) disc, and playback continues until another
session is encountered.
• A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Notes on the Mexican model
• You cannot select the graphic channels of CD-Gs or display CD-G
images with fading effects.
• Some functions of the unit, when used during CD-G disc playback,
may cause image distortion in the video output.
Listening to the radio
1 Select “FM” or “AM.”
Press TUNER/BAND
To turn on the subwoofer
Press SUBWOOFER wh on the unit repeatedly until
“SUB ON” appears. The SUBWOOFER indicator wg on
the unit lights up. If you later disconnect the subwoofer,
repeat the procedure until “SUB OFF” appears. The
volume of the subwoofer is linked to the front speakers.
repeatedly.
2 Select the tuning mode.
Press TUNING MODE 3 repeatedly until “AUTO”
appears.
3 Tune in the desired station.
Press +/− on the remote (or TUNING +/− on the unit)
8. Scanning stops automatically when a station is
tuned in, and then “TUNED” and “STEREO” (for
stereo programs) appear.
Playing a CD/CD-G/MP3 disc
The system offers the following display modes.
Display mode
When the system is off1),
Demonstration
The clock display is replaced by
lighting and flashing of the display
window.
The clock is displayed.
The display is turned off to conserve
power. The timer and clock continue
to operate.
Clock
Power Saving
Mode2)
1)
2)
The STANDBY indicator 2 on the unit lights up when the system
is off.
When the system is in Power Saving Mode, the following functions
are unavailable:
− setting the clock.
− changing the AM tuning interval (except for Saudi Arabian
model).
− turning on the system by pressing the function buttons (for
example, CD 3).
− changing the CD power manage function.
− resetting the system to factory settings.
Notes on the display information
• The following are not displayed;
− total playing time for a CD-DA disc depending on the play mode.
− total playing time for an MP3 disc.
− Remaining playing time for an MP3 file.
• The following are not displayed correctly;
− elapsed playing time of an MP3 file encoded using a VBR
(variable bit rate).
− folder and file names that do not follow either the ISO9660 Level
1, Level 2 or Joliet in the expansion format.
• The following are displayed;
− ID3 tag information for MP3 files when ID3 version 1 and version
2 tags are used.
− up to 30 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (˝ $ % ’ ( ) * , – . / < = >
@ [ \ ] _ ` { | } ! ? ^).
CD-G discs are supported only on the Mexican model.
1 Select the CD function.
Press CD 3.
2 Place a disc.
To stop automatic scanning
Press A (open/close) qj on the unit, and place a disc
with the label side up on the disc tray.
Press x (stop) 8.
To connect an optional headphones
To tune in a station with a weak signal
If “TUNED” does not appear and the scanning does
not stop, press TUNING MODE qh repeatedly until
“AUTO” and “PRESET” disappear, and then press
+/− on the remote (or TUNING +/− on the unit) 8
repeatedly to tune in the desired station.
Before using the system
To use the remote
Slide and remove the battery compartment lid wk, and
insert the two supplied R6 (size AA) batteries, E side
first, matching the polarities shown below.
To insert additional discs, press DISC SKIP qk to
rotate the disc tray.
To close the disc tray, press A (open/close) qj on the
unit again.
Do not force the disc tray closed with your finger, as
this may damage the unit.
3 Start playback.
Press N (play) on the remote (or NX (play/pause)
on the unit) 8.
Notes on using the remote
• With normal use, the batteries should last for about six months.
• Do not mix an old battery with a new one or mix different types of
batteries.
• If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
To
Press
Pause playback
X (pause) on the remote (or
NX (play/pause) on the unit)
8. To resume play, press the
button again.
Stop playback
x (stop) 8.
Select a folder on an
MP3 disc
Select a track or file
To set the clock
1 Turn on the system.
Press ?/1 (power) 1.
2 Select the clock set mode.
Press CLOCK/TIMER SET wj on the remote. If the
current mode appears on the display, press ./>
8 repeatedly to select “CLOCK SET” and then press
ENTER qf.
3 Set the time.
Press ./> 8 repeatedly to set the hour, and
then press ENTER qf. Use the same procedure to set
the minutes.
When you turn off the system after setting the clock,
the clock display appears instead of the demonstration
display.
The clock settings are lost when you disconnect the
power cord or if a power failure occurs.
on
To select
Press
CD
CD 3.
Tuner
Tape (deck A or B)
TUNER/BAND 3.
TAPE on the remote (or
TAPE A/B on the unit) 3.
Component (connected
using an audio cord)
AUDIO IN 3 on the unit.
Playing a tape
1 Select a tape deck.
Press TAPE (or TAPE A/B on the unit) 3 repeatedly.
2 Insert a tape.
Press PUSH Z 7 on the unit, and insert the TYPE
I (normal) tape into the cassette holder with the side
you want to play facing forward. Make sure there is
no slack in the tape to avoid damaging the tape or
the tape deck. Press PUSH Z 7 on the unit again to
close the cassette holder.
3 Start playback.
Press N (play) on the remote (or NX (play/pause)
on the unit) 8. Do not eject the tape during playback
or recording, as this may cause irreparable damage to
the tape and the cassette holder.
Hold down m/M (rewind/fast
forward) 8 during playback,
and release the button at the
desired point.
To
Press
Pause playback
Select Repeat Play
REPEAT qg repeatedly until
“REP” or “REP1” appears.
DISC SKIP (or DISC 1 − 3 on
the unit) qk in stop mode.
X (pause) on the remote (or NX
(play/pause) on the unit) 8. To
resume play, press the button again.
Stop playback
x (stop) 8.
DISC 1 − 3 qk on the unit
(Automatic Source Selection).
Rewind or fast
forward
Select Relay
Play*
PLAY MODE qh repeatedly until
“RELAY” appears.
EX-CHANGE qk on the unit.
* After the playback of the front side of deck A, deck B plays the
front side, and then stops.
Select a disc
Switch to CD
function from other
function
Exchange other
discs while playing
Press PLAY MODE qh repeatedly while the player is
stopped. You can select normal play (“ALL DISCS”
for all discs or “1 DISC” for a disc or “ *” for all
MP3 files in the folder on the disc), shuffle play (“ALL
SHUF*”), or
DISCS SHUF” or “1 DISC SHUF” or “
program play (“PGM”).
* When playing a CD-DA disc,
(SHUF) Play performs the same
operation as 1 DISC (SHUF) Play.
Notes on Repeat Play
• All tracks or files on a disc are played repeatedly up to five times.
• You cannot select “REP” and “ALL DISCS SHUF” at the same
time.
• “REP1” indicates that a single track or file is repeated until you stop
it.
Notes on playing MP3 discs
• Do not save other types of files or unnecessary folders on a disc that
has MP3 files.
• Folders that have no MP3 files are skipped.
• MP3 files are played back in the order that they are recorded onto
the disc.
• The system can only play MP3 files that have a file extension of
“.MP3.”
• If there are files on the disc that have the “.MP3” file extension,
but that are not MP3 files, the unit may produce noise or may
malfunction.
6
Press FM MODE qg on the remote repeatedly until
“MONO” appears to turn off stereo reception.
Find a point in a
track or file (except
for CD-G discs)
To change the play mode
Selecting a music source
Press the following buttons (or press FUNCTION
the remote repeatedly).
+/− (select folder) 8.
To reduce static noise on a weak FM stereo
station
./> (go back/go forward)
(or turn the MULTI JOG dial on
the unit) 8.
m/M (rewind/fast forward) 8.
Changing the display
To
Press
Change the
ILLUMINATION 4 on the unit
illumination
repeatedly.
pattern around the
VOLUME control
qs
Change
information on the
display*
Change Display
mode (See below.)
Using optional audio
components
DISPLAY 5 repeatedly when the
system is turned on.
DISPLAY 5 repeatedly when the
system is turned off.
* For example, you can view CD/CD-G/MP3 disc information, such
as the track or file number or folder name during normal play, or the
total playing time while the player is stopped.
Connect headphones to the PHONES jack 9 on the
unit.
To connect an optional component
Connect additional audio component to the AUDIO
IN jack 0 on the unit using an audio analog cord (not
supplied). Turn down the volume on the system, and then
select the AUDIO IN function.
HCD-RG490/RG590
Other Operations
Creating your own CD program
(Program Play)
Use buttons on the remote to create your own program.
1 Press CD 3 to select the CD function.
2 Press PLAY MODE qh repeatedly until “PGM”
appears while the player is stopped.
3 Press DISC SKIP qk repeatedly to select a disc.
4 Press ./> 8 repeatedly until the desired
track number appears.
+/− (select
When programming MP3 files, press
folder) 8 repeatedly to select the desired folder, and
then select the desired file.
Disc tray number Selected track or file number
When recording a folder from an MP3 disc, press
PLAY MODE qh repeatedly to select “ ” and then
+/− (select folder) 8 repeatedly to select
press
the desired folder.
To record only your favorite CD tracks or MP3 files in
your desired order, perform steps 2 to 6 of “Creating
your own CD program.”
For Manual Recording and Sound Mixing:
Select the desired source to record or mix.
To record only sound from a microphone, press CD
3, and do not start playing any other source in step
4.
For CD Synchro Recording:
Press CD SYNC 6.
4 Start recording.
Press ENTER qf to add the track or file to the
program.
“– –.– –” appears when the total program time
exceeds 100 minutes for a CD, or when you select an
MP3 file.
6 Repeat steps 3 through 5 to program additional
tracks or files, up to a total of 25 tracks or files.
7 To play your program of tracks or files, press N
(play) 8.
The program remains available until you open the
disc tray. To play the same program again, press N
(play) 8.
To cancel Program Play
For Manual Recording:
Press REC PAUSE/START 6, and then start playing
the desired recording source.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the noise.
For Sound Mixing:
Press REC PAUSE/START 6, and then start playing
the desired source and start singing or speaking into
the microphone.
If acoustic feedback (howling) occurs, reduce
the volume, move the microphone away from the
speakers, or change the direction of the microphone.
Press x (stop) 8.
• Recording stops if you change to a different function.
• When loud sound signals are input, the system automatically adjusts
the recording level to prevent distortion of the recorded sound signal
(Auto Level Control function).
• You cannot eject the disc during CD Synchro Recording.
Creating your own sound effect
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1 Tune in the desired station (see “Listening to the
radio”).
2 Press TUNER MEMORY wl.
Preset number
You can raise or lower the levels of specific frequency
ranges, and then store the setting as “USER” in the
memory.
Use buttons on the unit to create your own sound effect.
1 Press BASS, VOCAL or GUITAR wf to select a
frequency band.
2 Press SELECT B/b w; repeatedly to select
a frequency, and then press SELECT +/–
repeatedly to adjust the frequency level. Repeat
this for each band you want to adjust.
Frequency
Press +/– 8 repeatedly to select your desired
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4 Press ENTER qf.
5 Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6 To call up a preset radio station, press TUNING
MODE qh repeatedly until “PRESET” appears,
and then press +/– 8 repeatedly to select the
desired preset number.
Frequency level
Frequency band
3 Hold down PRESET EQ wd until “COMPLETE”
appears
The setting is stored in the memory.
4 To call up the personal sound effect, press
PRESET EQ wd repeatedly until “USER”
appears.
To cancel the sound effect
1 Turn MIC LEVEL qa to MIN to turn down the
2 Connect an optional microphone to the MIC jack
Use buttons on the unit to control tape recording.
1 Load a recordable tape into deck B with the
side you want to record facing forward, and then
press TAPE A/B 3 repeatedly to select TAPE B.
2 Prepare the recording source.
For CD Synchro Recording:
Press CD 3 to select the CD function. Load the
disc you want to record, and press DISC SKIP qk
repeatedly to select the disc.
Use buttons on the remote to control the Play Timer and
the Rec Timer. Make sure you have set the clock.
1 Prepare the sound source.
For Play Timer:
Prepare the sound source, and then press VOLUME
+/− qs to adjust the volume.
To start from a specific CD track or MP3 file, create
your own program.
For Rec Timer:
Tune in the preset radio station.
2 Press CLOCK/TIMER SET wj.
3 Press ./> 8 repeatedly to select “PLAY
SET” or “REC SET,” and then press ENTER qf.
“ON” appears, and the hour indication flashes.
4 Set the time to start playing or recording.
Press ./> 8 repeatedly to set the hour,
and then press ENTER qf.
The minute indication flashes. Use the procedure
above to set the minutes.
5 Use the same procedure as in step 4 to set the
time to stop playing or recording.
6 Select the sound source or prepare the tape.
For Play Timer:
Press ./> 8 repeatedly until the desired
sound source appears, and then press ENTER qf. The
display shows the timer settings.
7 Press ?/1 (power) 1 to turn off the system.
The system turns on 15 seconds before the preset
time. If the system is on at the preset time, the Play
Timer and the Rec Timer will not play or record.
To activate or check the timer again
Press CLOCK/TIMER SELECT wj, press ./> 8
repeatedly until “PLAY SELECT” or “REC SELECT”
appears, and then press ENTER qf.
To change the setting
You can record an entire CD onto a tape. The recording
level is adjusted automatically.
You can “mix” sounds by playing one of the components
and singing or speaking into a microphone (not
supplied). The mixed sound can be recorded onto a tape.
You can record a preset radio station at a specified time.
Enjoying karaoke
CD Synchro Recording:
Sound Mixing (Latin American model only):
Rec Timer:
To cancel the timer
You can record on a TYPE I (normal) tape in three ways:
You can record just the portions you like from a sound
source, including connected audio components.
You can wake up to CD, tape or tuner at a preset time.
Press PRESET EQ wd repeatedly until “EQ OFF”
appears.
You can sing along by connecting an optional
microphone.
Use buttons on the unit for karaoke.
Manual Recording:
Play Timer:
For Rec Timer:
Load a recordable tape into deck B. The display
shows the timer settings.
(Latin American model only)
Recording onto a tape
The system offers three timer functions. You cannot
activate both the Play Timer and the Rec Timer at the
same time. If you use either with the Sleep Timer, the
Sleep Timer has priority.
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP qd repeatedly. If you select “AUTO,” the
system automatically turns off after the current disc or
tape stops or in 100 minutes.
Do not select “AUTO” during Synchro Recording of a
tape.
Notes
Presetting radio stations
Using the Timers
Sleep Timer:
To delete the last track or file of the program
Press DISPLAY 5 repeatedly while the player is
stopped.
You cannot set the SURROUND effect when “KARAOKE PON” has
been selected.
For CD Synchro Recording:
Press REC PAUSE/START 6. When the recording
is completed, the CD player and the tape deck stop
automatically.
To stop recording
To view program information, such as total
playing time and the number of tracks
Note on the Mexican model
While recording, you cannot listen to other sources.
Press PLAY MODE qh repeatedly until “PGM”
disappears while the player is stopped.
Press CLEAR ws while the player is stopped.
To cancel karaoke mode, in addition to the above
procedure, press KARAOKE 5 repeatedly until “m”
disappears.
To adjust the microphone reverb, turn ECHO LEVEL qa
to adjust the reverb effect. To cancel, turn ECHO LEVEL
qa to MIN.
To use CD-Gs, turn on your TV, and select the
appropriate video input.
3 Set deck B to stand by for recording.
For Manual Recording and Sound Mixing:
Press REC PAUSE/START 6.
Total playing time of program
(including selected track or file)
For the Mexican model only:
Repeat the same procedure as above until “TIMER OFF”
appears, and then press ENTER qf.
Start over from step 1.
Tips
• The Play Timer setting remains as long as the setting is not canceled
manually.
• The volume is reduced to minimum during the Rec Timer.
• The Rec Timer is canceled automatically after the Rec Timer has
been activated.
microphone volume level.
qa.
The Mexican model has 2 microphone jacks.
3 For the Mexican model only:
Press KARAOKE 5 repeatedly to select
“KARAOKE PON” for stereo-recorded CD, or “MPX
L” or “MPX R” for multiplex CD.
4 Start playing the music.
5 Turn MIC LEVEL qa to adjust the microphone
volume.
If acoustic feedback (howling) occurs, reduce
the volume, move the microphone away from the
speakers, or change the direction of the microphone.
After you have finished, disconnect the microphone
from the MIC jack qa.
7
HCD-RG490/RG590
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
SET
3-2. CASE (SIDE-L), CASE (SIDE-R)
(Page 9)
3-3. CASE (TOP)
(Page 9)
3-4. LID (CD)
(Page 9)
3-5. CD MECHANISM DECK
(CDM74KF-K6BD83S: Except Mexican model)
(CDM74KF-F1BD84: Mexican model)
(Page 11)
3-6. FRONT PANEL BLOCK
(Page 10)
3-10. BD BOARD
(Mexican model),
CD BOARD
(Except Mexican model)
(Page 12)
3-12. OPTICAL PICK-UP BLOCK
(KSM-213DCP: Except Mexican model)
(KSM-215DCP: Mexican model)
(Page 13)
3-7. MECHANICAL DECK
(CWM42FF609)
(Page 10)
3-11. DRIVER BOARD,
SW BOARD
(Page 13)
3-13. SENSOR BOARD
(Page 14)
3-8. BACK PANEL SECTION
(Page 11)
3-14. MOTOR (TB) BOARD
(Page 14)
3-9. MAIN BOARD
(Page 12)
3-15. MOTOR (LD) BOARD
(Page 15)
8
HCD-RG490/RG590
Note: Follow the disassembly procedure in the numerical order given.
3-2. CASE (SIDE-L), CASE (SIDE-R)
3 case (side-L)
2 two screws
(BVTP3 × 8)
1 three screws
(case 3 TP2)
6 case (side-R)
5 two screws
(BVTP3 × 8)
4 three screws
(case 3 TP2)
3-3. CASE (TOP)
2 Open the case (top).
4 four claws
3
1 two screws
(B3)
5 case (top)
2 Open the case (top).
2 Open the case (top).
9
HCD-RG490/RG590
3-4. LID (CD)
3 four claws
4 lid (CD)
2
1 Turn the gear (loading A)
to the direction of the arrow.
3-5. CD MECHANISM DECK
(CDM74KF-K6BD83S: EXCEPT MEXICAN MODEL)
(CDM74KF-F1BD84: MEXICAN MODEL)
3 flexible flat (13 core) cable
(Mexican model)
(CN331)
2 flexible flat (23 core) cable
(except Mexican model)
(CN301)
flexible flat (31 core) cable
(Mexican model)
(CN302)
6 CD mechanism deck
(CDM74KF-K6BD83S: except Mexican model)
(CDM74KF-F1BD84: Mexican model)
4 connector
(Mexican model)
(CN1004)
1 flexible flat (13 core) cable
(CN701)
5 three screws
(BVTP3 × 8)
5 screw
(BVTP3 × 8)
5 screw (BVTP3 × 8)
10
HCD-RG490/RG590
3-6. FRONT PANEL BLOCK
1 flexible flat (19 core) cable
(CN991)
5 front panel block
3 two connectors
(CN301, CN302)
4 four screws
(BVTP3 × 8)
2 flexible flat (9 core) cable
(UK, 240V AC area in E models)
flexible flat (13 core) cable
(except UK, 240V AC area in E models)
(CN061)
3-7. MECHA DECK (CWN42FF609)
2 mecha deck
(CWN42FF609)
2 cover (TCM)
(Mexican model)
1 four screws
(BVTP2.6 × 8)
1 two screws
(BVTP2.6 × 8)
11
HCD-RG490/RG590
3-8. BACK PANEL SECTION
4 back panel section
1 flexible flat (11 core) cable
(RG590: UK model)
flexible flat (9 core) cable
(except RG590: UK model)
(tuner (FM/AM))
2 connector
(CN041)
3 four screws
(B3)
3 two screws
(B3)
3-9. MAIN BOARD
2 connector
(CN501)
5 two screws
(BVTT4 × 8)
9 POWER board,
SUB WOOFER board block
2 connector
(RG490: CN903)
(RG590: CN905)
4 screw
(BV3)
8 MAIN board
2 connector
(CN907)
7 connector
(CN031)
6
3 screw
(BVTP3 × 8)
1 flexible flat (11 core) cable
(CN008)
12
3 screw
(BVTP3 × 8)
HCD-RG490/RG590
3-10. BD BOARD (MEXICAN MODEL), CD BOARD (EXCEPT MEXICAN MODEL)
1 two screws
(BVTP2.6 × 8)
2 cover (CDM)
4 screw
(BVTP2.6)
(Mexican model)
5 gap tube
(Mexican model)
7 BD board (Mexican model),
CD board (except Mexican model)
6 Remove soldering from the four points.
3 flexible flat (16 core) cable
(CN101)
3-11. DRIVE BOARD, SW BOARD
1 two screws
(BTTP (M2.6))
3 connector
(CN703)
4 DRIVER board
5 screw
(BTTP (M2.6))
6 SW board
2 wire (flat type) (5 core)
(CN702)
13
HCD-RG490/RG590
3-12. OPTICAL PICK-UP BLOCK
(KSM-213DCP: EXCEPT MEXICAN MODEL)
(KSM-215DCP: MEXICAN MODEL)
1 floating screw
(PTPWH M2.6)
2 holder (213) assy
9
5 two insulators
qg optical pick-up block
(KSM-213DCP: except Mexican model)
(KSM-215DCP: Mexican model)
8 two insulators
4 two coil springs
(insulator)
7 two coil springs
(insulator)
3 two floating screws
(PTPWH M2.6)
6 two floating screws
(PTPWH M2.6)
qd flexible flat (16 core) cable
(CN101)
qf BD board (Mexican model),
CD board (except Mexican model)
qa gap tube (Mexican model)
qs Remove the four solders of motor.
0 screw (BVTP2.6 × 8)
(Mexican model)
3-13. SENSOR BOARD
1 floating screw
(PTPWH M2.6)
2 tray
8 screw
(BTTP (M2.6))
3 belt (table)
0 SENSOR board
4 floating screw
(PTPWH M2.6)
5 pulley (table)
6 floating screw
(PTPWH M2.6)
7 gear (geneva)
14
9 connector
(CN731)
HCD-RG490/RG590
3-14. MOTOR (TB) BOARD
2 stopper
4
1 stopper
7 table motor assy (M741)
3 wire (flat type) (5 core) (CN742)
8 MOTOR (TB) board
6 Remove the two solderings of motor.
5 two screws
(BTTP (M2.6))
3-15. MOTOR (LD) BOARD
2 two screws
(BTTP (M2.6))
3 Remove the two solderings of motor.
4 MOTOR (LD) board
5 loading motor assy (M751)
1 belt (loading)
15
HCD-RG490/RG590
SECTION 4
TEST MODE
COLD RESET
AMP TEST MODE
The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning the
set to the customer.
Procedure:
1. Press three buttons of x , u and [DISC 1] simultaneously.
2. The message “COLD RESET” is displayed on the fluorescent
indicator tube momentarily, then becomes standby states.
This mode is used to display the parameter of amplifier IC and
display the VACS status.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press three buttons of x , u and A simultaneously.
3. When the AMP test mode is activated, the message “AMP
TEST IN” is displayed on the fluorescent indicator tube
momentarily, then amplifier adjustment mode is displayed on
the fluorescent indicator tube.
4. Press the [REC PAUSE/START] button to changed over between
VACS status display mode and the amplifier IC parameter
display mode.
5. In this mode, press the [ENTER] button to changed over DBFB
on/off, and “DBFB ON” or “DBFB OFF” is displayed on the
fluorescent indicator tube.
6. In this mode, press the [SURROUND] button to changed over
surround on/off, and “SURROUND ON” or “SURROUND
OFF” is displayed on the fluorescent indicator tube.
− HCD-RG490/RG590: UK models −
7. In this mode, press the [EQ BAND] button to enter the equalizer
adjustment mode.
In the equalizer adjustment mode, press the [EQ BAND] button
to change over the adjustment band as LOW/MID/HIGH. And
turn the multi jog knob to adjust the equalizer level of each
bands.
− Except HCD-RG490/RG590: UK models −
7. In this mode, press the [BASS], [VOCAL] or [GUITER] buttons
to enter the parametric equalizer adjustment mode.
In the parametric equalizer adjustment mode, press the [BASS],
[VOCAL] and [GUITER] buttons to change over the adjustment
band. And press the B and b buttons to adjust the equalizer
frequency of each bands, or press the [+] and [--] buttons to
adjust the equalizer level of each bands.
8. To release the amplifier IC parameter display mode or equalizer
adjustment mode, press the I/1 button to the power off.
TUNING STEP CHANGE-OVER
(Except HCD-RG590: UK model)
A step of AM tuning interval can be changed over between 9 kHz
and 10 kHz.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press the [TUNER/BAND] button to select “AM”.
3. Press the I/1 button to turn the power off.
4. Press two buttons of [TUNING --] and I/1 simultaneously.
5. The message “AM 9K STEP” or “AM 10K STEP” is displayed
on the fluorescent indicator tube, and thus the tuning interval
is changed over.
CD SHIP (LOCK) MODE
This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press the [CD] button to select “CD”.
3. Press two buttons of u and [POWER] simultaneously.
4. The message “LOCK” is displayed on the fluorescent indicator
tube, and the CD ship mode is set.
CD SHIP (LOCK) MODE & COLD RESET
This mode is used to perform CD ship (lock) mode and cold reset
simultaneously.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press the [CD] button to select “CD”.
3. Press three buttons of x , [CD] and A simultaneously.
4. The message “COLD RESET” is displayed on the fluorescent
indicator tube momentarily, then becomes standby states.
ANTITHEFT LOCK MODE
This mode is used to unable to take sample disc out of disc table in
the shop.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press the [CD] button to select “CD”.
3. Press two buttons of x and A for 5 seconds.
4. The message “LOCKED” is displayed on the fluorescent
indicator tube and the disc table is locked. (Even if pressing
the Z button, the message “LOCKED” is displayed on the
fluorescent indicator tube and the disc table is locked)
5. To release this mode, press two buttons of x and Z for 5
seconds.
6. The message “UNLOCKED” is displayed on the fluorescent
indicator tube and the disc table is unlocked.
16
MC TEST MODE
This mode is used to check operations of microprocessor.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press three buttons of x , u and [DISC 3] simultaneously.
3. When the MC test mode is activated, VACS level is displayed
on the fluorescent indicator tube momentarily.
4. Turn the multi jog knob clockwise, the message “ALL EQ
MAX” is displayed on the fluorescent indicator tube
momentarily and turn the multi jog knob counterclockwise, the message “ALL EQ MIN” is displayed on
the fluorescent indicator tube momentarily.
5. Press the [ENTER] button, the message “ALL EQ FLAT” is
displayed on the fluorescent indicator tube momentarily.
6. Turn the [VOLUME] knob clockwise, the message “VOLUME
MAX” is displayed on the fluorescent indicator tube
momentarily and turn the [VOLUME] knob counterclockwise,
the message “VOLUME MIN” is displayed on the fluorescent
indicator tube momentarily.
7. Press the [REC PAUSE/START] button to changed over VACS
on/off.
8. Press the I/1 button to release from this mode, then cold reset
is performed.
HCD-RG490/RG590
VERSION DISPLAY MODE
This mode is used to check the model, destination and software
version.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press three buttons of x , u and [DISC 2] simultaneously.
3. Fluorescent indicator tube, and LEDs are all turned on.
4. Press the [REC PAUSE/START] button to display the software
version and year, month, day of the software creation.
5. Press the [CD SYNC] button to display the model and destination.
6. To release this mode, press three buttons of x , u and
[DISC 2] simultaneously.
CD ERROR CODE DISPLAY MODE
This mode can be used for error code display of CD section.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press the [CD] button to select “CD”.
3. Press three buttons of x , [CD] and [DISC 1] simultaneously.
4. When this mode is activated, mechanism deck error code is
displayed on the fluorescent indicator tube.
5. Press the [REC PAUSE/START] button to changed over between
optical pick-up error code display mode and mechanism deck
error code mode.
6. Turn the multi jog knob to change over display of error history.
7. To release this mode, press the I/1 button to turn the power
off.
1. Mechanism Deck Error Code Mode
When this mode is entered, mechanism deck error code is displayed
with the 10-character format on the fluorescent indicator tube.
The first digit from the left indicates:
The first digit from the left indicates which mode the error history
is. In the mechanism deck error code mode, “M” is displayed on
the fluorescent indicator tube.
The second digit from the left indicates:
(Error history number display)
The second digit from the left indicates which order the error history
is. “1” indicates the latest error history, and each time the number
increases by one, the error history goes back to one-previous error.
The third and 4th digit from the left indicates:
(Error status display)
The third and 4th digit from the left indicates which error status is
indicated.
Display
0 0
0 8
1 6
1 7
1 8
2 0
2 2
The 5th and 6th digit from the left indicates:
(Present status display)
The 5th and 6th digit from the left indicates which operating status
when an error occurred is indicated.
Display
0 1
0 2
0 3
0
1
1
1
1
1
1
4
0
1
2
3
4
8
Status
Open completion status
From open status, the movement to chucking down position
is under way
From chucking down position, the open operation is under
way
Chucking down completion status
The chucking down operation is under way
The chucking up operation is under way
Close completion status
From close status, the ex-open operation is under way
From ex-open status, the close operation is under way
Ex-pen completion status
The 7th and 8th digit from the left indicates:
(Motor status display)
The 7th and 8th digit from the left indicates which motor output
status when an error occurred is indicated.
Display
× 0
× 1
× 2
× 3
0 ×
1 ×
2 ×
3 ×
Status
No table motor output
Table motor forward output
Table motor backward output
Table motor break output
No loading motor output
Loading motor forward output
Loading motor backward output
Loading motor break output
The 9th and 10 th digit from the left indicates:
(Tray status display)
The 9th and 10th digit from the left indicates which target processing
when an error occurred is indicated.
Display
0 1
1 2
1 8
Status
Open operation
Close operation
Ex-open operation
Status
No error
Table operation time-out (Table does not move to the target
position within the specified time)
In the chucking down operation, the operation was retried
by the maximum number of times but the operation could
not be completed
In the chucking up and down operation, the reverse
recovery processing was attempted but it could not be
recovered
In the chucking up operation, the operation was retried by
the maximum number of times but the operation could not
be completed
Loading operation time-out (Table does not move to the
target position within the specified time)
As the chuck was in the ex-open status at the initialization,
the closing was attempted but could not be completed
17
HCD-RG490/RG590
2. Optical Pick-up Error Code Mode
When this mode is entered, optical pick-up error code is displayed
with the 8-character format on the fluorescent indicator tube.
The first digit from the left indicates:
The first digit from the left indicates which mode the error history
is. In the optical pick-up error code mode, “D” is displayed on the
fluorescent indicator tube.
The second digit from the left indicates:
(Error history No. display)
The second digit from the left indicates which order the error history
is. “1” indicates the latest error history, and each time the number
increases by one, the error history goes back to one-previous error.
The third and 4th digit from the left indicates:
(Error status display)
The third and 4th digit from the left indicates which error status is
indicated.
Display
0 1
0 2
0
0
0
0
0
3
4
5
6
7
Status
Not focused (TOC read without a disc)
GFS NG (TOC read with a disc chucked)
Start operation time-over
Defocused continuously (Defocused during TOC reading)
Q code not entered for specified time
Tracking not turned ON
Blank disc (Blank disc TOC read)
The 5th and 6th digit from the left indicates:
(Error step display)
The 5th and 6th digit from the left indicates which processing when
a trouble occurred
Display
0 1
0 2
0 3
0 4
0 5
0 6
0 7
0 8
0 9
0 A
0 B
0 C
0 D
0 E
Contents
Power OFF in progress
Initialize in progress
Oscillation stopping
From oscillation stop, oscillation starting
Stopping
Stop operation is under way
Start operation in progress
TOC read in progress
Search operation is under way
Playback operation is under way
Pause operation is under way
Playback manual search operation is under way
Pause manual search operation is under way
—
The 7th and 8th digit from the left indicates:
The 7th and 8th digit from the left indicates which operation in
progress when a trouble occurred. (Step of each processing of the
5th and 6th digits is indicated)
18
5 REPEAT LIMIT CANCEL MODE
Number of repeat for CD playback is 5 times when the repeat mode
is “REPEAT”. This mode is used to enables CD to repeat playback
for limitless times.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press the [CD] button to select “CD”.
3. Press three buttons of x , [CD] and u simultaneously.
4. The message “LIMIT OFF” is displayed on the fluorescent
indicator tube momentarily, CD repeat 5 limit is cancelled.
CD POWER MANAGE
This mode is used to changed over CD power on/off for decreasing
of reception noise in the tuner mode.
Procedure:
1. Press the I/1 button to turn the power on.
2. Press the [CD] button to select “CD”.
3. Press the I/1 button to turn the power off.
4. Press two buttons of x and I/1 simultaneously.
5. The message “CD POWER ON” or “CD POWER OFF” is
displayed on the fluorescent indicator tube, and CD power
on/off changed over in the tuner mode.
HCD-RG490/RG590
SECTION 5
MECHANICAL ADJUSTMENTS
PRECAUTION
1. Clean the following parts with a denatured-alcohol-moistened
swab :
record/playback head
pinch roller
erase head
rubber belts
capstan
idlers
2. Demagnetize the record/playback head with a head
demagnetizer. (Do not bring the head magnetizer close to the
erase head.)
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, appiy suitable locking compound to
the parts adjusted.
5. The adjustments should be performed with the rated power
supply voltage unless otherwise noted.
TORQUE MEASUREMENT
Mode
Torque Meter
FWD
CQ-102C
FWD
Back Tension
CQ-102C
FF/REW
CQ-201B
Meter Reading
2.6 – 6.9 mN⋅m
(30 – 70 g⋅cm)
(0.41 – 0.97 oz⋅inch)
0.15 – 0.59 mN⋅m
(1.5 – 6.0 g⋅cm)
(0.021 – 0.083 oz⋅inch)
5.4 – 16.7 mN⋅m
55 – 170 g⋅cm)
0.76 – 2.35 oz⋅inch)
TAPE TENSION MEASUREMENT
Mode
Tension Meter
FWD
CQ-403A
Meter Reading
more than 100 g
(more than 3.53 oz)
19
HCD-RG490/RG590
SECTION 6
ELECTRICAL ADJUSTMENTS
DECK SECTION
4. After the adjustments, apply suitable locking compound to
the pats adjusted.
0 dB=0.775 V
1. Demagnetize the record/playback head with a head
demagnetizer.
2. Do not use a magnetized screwdriver for the adjustments.
3. After the adjustments, apply suitable locking compound to the
parts adjust.
TEST TAPE
Tape
P-4-A063
Signal
6.3 kHz, -10 dB
Used for
Azimuth Adjustment
RECORD/PLAYBACK HEAD AZIMUTH ADJUSTMENT
Note 1: Remove the mecha deck before this adjustment.
(Refer to Section 3. DISASSEMBLY (See page 8))
Note 2: Perform this adjustment for both decks.
Procedure:
1. Mode: Playback
test tape
P-4-A063
(6.3 kHz, –10 dB)
MIC. AUX. HP board
PHONES jack
(J701)
level meter
set
+
–
2. Turn the adjustment screw and check output peaks. If the peaks
do not match for L-CH and R-CH, turn the adjustment screw
so that outputs match within 1dB of peak.
within
1dB
L-CH
peak
within
1dB
Output
level
Screw
position
R-CH
peak
L-CH
peak
Screw
position
R-CH
peak
3. Mode: Playback
test tape
MIC. AUX. HP board
P-4-A063
PHONES jack oscilloscope
(6.3 kHz, –10 dB) (J701)
V
set
waveform of oscilloscope
in phase 45°
good
20
90° 135° 180°
wrong
H
Adjustment Location: Playback Head (DECK-A)
Record/Playback/Erase Head (DECK-A)
HCD-RG490/RG590
CD SECTION
Note:
1. CD Block is basically constructed to operate without adjustment.
2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.
3. Use an oscilloscope with more than 10 MΩ impedance.
4. Clean the object lens by an applicator with neutral detergent when
the signal level is low than specified value with the following checks.
5. Check the focus bias check when optical pick-up block is replaced.
• Abbreviation
MX: Mexican model
Connecting Location:
– CD Board (Conductor Side)
(Except RG490: MX/RG590: MX) –
FOCUS BIAS CHECK
oscilloscope
(DC range)
CD board (Except RG490: MX/RG590: MX)
BD board (RG490: MX/RG590: MX)
TP (RFACI)
TP (VC)
+
–
Procedure :
1. Connect oscilloscope to TP (RFACI) and TP (VC) on the CD
board (Except RG490: MX/RG590: MX) or BD board
(RG490: MX/RG590: MX).
2. Press the I/1 button to turn the power on, and press
the A button to open the CD disc table.
3. Set disc (YEDS-18) on the tray and press the u button to
playback.
4. Confirm that oscilloscope waveform is as shown in the figure
below. (eye pattern)
A good eye pattern means that the diamond shape (◊) in the
center of the waveform can be clearly distinguished.
IC201
TP
(VC)
TP
(RFACI)
– BD Board (Conductor Side) (RG490: MX/RG590: MX) –
VOLT/DIV: 200 mV
TIME/DIV: 500 ns
level:
0.9 ± 0.4 Vp-p
TP
(VC)
IC201
TP
(RFACI)
21
HCD-RG490/RG590
MEMO
22
HCD-RG490/RG590
SECTION 7
DIAGRAMS
7-1. BLOCK DIAGRAM – CD SERVO Section –
DETECTOR
+3.3V
A
A
57 A
B
B
BCK 5
6 BCKI
LRCK 1
2 LRCKI
AOUT2 117
R-CH
A
FEO 55
E
F
51 F
26 A
B
50 E
F
27 B
C
TEO 53
28 C
D
LASER DIODE
CD DSP
IC201
AUTOMATIC
POWER CONTROL
Q321
LD
LD
SSTP
XTAO
39
109
108
67 PD
OPTICAL PICK-UP BLOCK
(KSM-213DCP)
(EXCEPT RG490: MX/RG590: MX)
(KSM-215DCP)
(RG490: MX/RG590: MX)
+3.3V
AUTOMATIC
POWER CONTROL
Q10
PD
27 OPOUT
OPIN+ 2
X201
16.9344MHz
MDP
6
9
10
11
12
13
14
MDP
SFDR
SRDR
TFDR
TRDR
FFDR
FRDR
38 MDP
CH3FIN 23
18 CH3OUTR
CH3RIN 22
SFDR
TEI 21
FEI 23
SSTP
7
78
77
102 105 104 107 115 95 110
98 99 110
65 66 63 60 65 61
S101
(LIMIT)
15 CH4OUTR
17 CH3OUTF
X171
16.9344MHz
41 SFDR
SBSO, WFCK,
SCOR, EXCK
M
(FOCUS)
14 CH1OUTF
CH1FIN 4
13 CH1OUTR
CH1RIN 5
12 CH2OUTF
CH2FIN 6
11 CH2OUTR
CH2RIN 7
SRDR
TFDR
TRDR
FFDR
FRDR
MUTE
20
42 SRDR
15 54 28 18 19 71
TEI 52
43 TFDR
C-11
C-12
C-9
C-13
C-14
C-10
MP3-RST
C-15
FEI 54
44 TRDR
45 FFDR
SYSTEM CONTROLLER
IC901 (1/4) (EXCEPT RG490: MX/RG590: MX)
IC901 (1/4) (RG490: MX/RG590: MX)
O-LM-F 34
O-LM-R 33
C-3
C-5
C-15
C-6
C-7
C-11
C-12
C-9
C-10
C-14
C-13
C-1
C-8
C-8
C-4
MIDIO
MICK
MICS
MIACK
PO11/BUCK/AD14
MILP
RESET
STANDBY
: CD PLAY
EXCEPT RG490: MX
/RG590: MX
MP3 DECODR
IC301
(RG490: MX/RG590: MX)
46 FRDR
89 11 16 20 26 12 90 13 14 10 15 7 8
Abbrivation
MX : Mexican model
R-ch is omitted due to same as L-ch.
SIGNAL PATH
6
7
4
8
36
5
2
3
RG490: MX
RG590: MX
C-3
C-5
C-15
C-4
C-6
C-7
C-11
C-12
C-9
C-10
C-14
C-13
C-1
C-8
MP3-RST
LOADING MOTOR DRIVE
IC701
7 FIN
9 RIN
OUT1 4
OUT2 2
O-CD-DATA
O-TM-F 36
O-CD-CLK
O-TM-R 35
O-XLAT/O-MP3-STB
O-D-MUTE/O-XLT
I-CD-SENS
I-SCOR
I-CD-NUMBER-SENS 37
I-MP3-DATA
O-MP3-DATA
O-MP3-CLK
I-CD-ENCODER 66
O-MP3-XLAT/O-MP3-CS
O-MP3-CS/O-MP3-LP
I-MP3-REQ
I-OPEN-SW 38
I-MP3-ACK
O-XTCN
O-XRST
O-MP3-RESST
7 FIN
9 RIN
OUT1 4
OUT2 2
LEVEL SHIFT
Q731
ROTARY
ENCODER
S711
OPEN
CLOSE
HCD-RG490/RG590
23
23
M
M751
(LOADING)
M
M741
(TABLE)
TABLE MOTOR DRIVE
IC712
52
54
28
31
53
40
71
72
70
26
30
29
27
24
32
25
B
(Page 25)
SDIO
BCKA
LRCKA
SBSY/BCKIB
SFSY/LRCKIB
SDO0
(TRACKING)
2-AXIS
DEVICE
: VIDEO
R-CH
37 PD
MDP
SFDR
SRDR
TFDR
TRDR
FFDR
FRDR
DATA
CLOK
XLAT
SENS
SCOR
DATA2
CLK2
XLAT-MP3
REQ-MP3
IREQ-MP3
ACK-MP3
XTACN
XRST
M402
(EXCEPT RG490: MX/RG590: MX)
M102
(RG490: MX/RG590: MX)
(SLED)
CH4IN 24
AOUT2 86
CD DSP
IC101
36 LD
16 CH4OUTF
M
42 RFACI
TEO 22
FOCUS/TRACKING COIL DRIVE,
SPINDLE/SLED MOTOR DRIVE
IC402 (EXCEPT RG490: MX/RG590: MX)
IC251 (RG490: MX/RG590: MX)
M401
(EXCEPT RG490: MX/RG590: MX)
M101
(RG490: MX/RG590: MX)
(SPINDLE)
RFACO 41
20 F
S201
(LIMIT)
(EXCEPT RG490: MX/RG590: MX)
AOUT1 81
EG_
IN
FEO 24
F
PD
35
19 E
66 LD
XTAI
PD
AC_
34
SUM
29 D
E
LD
A
(Page 24)
PCMD
BCK
LRCK
BCKI
LRCKI
PCMDI
60 D
E
4 PCMDI
SBSO
EXCK
WFCK
71 RFACI PCMD 3
SCOR
SBSO
EXCK
WFCK
59 C
D
CD-L
AOUT1 112
RFACO 70
DATA
CLOK
XLAT
SENS
SCOR
XTACN
XRST
D
EG_
IN
C-3
C-5
C-4
C-6
C-7
C-1
C-8
I-V AMP
C
65
XTAO
AC_
64
SUM
XTAI
58 B
C
DISC TABLE
ADDRESS SENSOR
IC731
DISC TABLE
ADDRESS DETECT
S751
DISC TABLE
OPEN/CLOSE
DETECT
HCD-RG490/RG590
7-2. BLOCK DIAGRAM – MAIN Section –
(RG490: MX/RG590: MX)
DIGITAL
ECHO
IC802
Abbrivation
AR : Argentina model
E2 : 120V AC area in E model
E3 : 240V AC area in E model
E51 : Chilean and Peruvian models
MX : Mexican model
R-ch is omitted due to same as L-ch.
SIGNAL PATH
VR851
ECHO LEVEL
(RG490: MX/RG590: MX)
JK801
MIC 1
MIC AMP
IC801 (1/2)
MUTING
Q801
MIC AMP
IC801 (2/2)
VR801
MIC LEVEL
: TUER (FM/AM)
: CD PLAY
(EXCEPT RG490: E3/RG590: UK, E3)
JK802
MIC 2
: TAPE PLAY (DECK-A)
+9V
: TAPE PLAY (DECK-B)
JK802
MIC
RG490: E2, E51/
RG590: E2, E51, AR
: AUDIO IN
36 37
HP IN
(Page 25)
(RG490/RG590: UK)
J702
AUDIO IN
2 AUXL
R-CH
TONEOUTL 10
11 VINL
OUT
OUTL 14
(RG590: E2, E51, MX, AR)
CD-L
40 CDL
(Page 23)
PB SWITCH
(DECK-A)
Q301
L-CH
HP1
(PB)
(DECK-A)
R-CH
PB AMP
IC301
+
R-CH
R-CH
BB12 12
PARAMETRIC EQUALIZER
IC102 (RG590: E2, E51, AR)
IC102 (RG590: MX)
SW OUT
+
LOUT 9
BB22 13
RECOUTL 3
D031
BASS AGC
Q113
BASS AGC
R-CH
R-CH
R-CH
R-CH
REC SWITCH
Q403
HRPE1
(REC/PB/ERASE)
(DECK-B)
MUTING
Q307
Q401
MUTING
MUTING
CONTROL
CONTROL
SWITCH
SWITCH
Q400,
Q305, 407
306
REC BIAS
SWITCH
Q451, 452
ERASE
+9V
REC CONTROL
SWITCH
Q409, 410
TAPE MECHANISM
DECK CONTROLLER
IC701 (1/2)
D923
TAPE MECHANISM
DECK BLOCK
O-MOTOR 33
CAPSTAN/REEL
MOTOR DRIVE
Q701, 704
CAMP+
O-SOL-A 34
TRIGGER PLUNGER
DRIVE (DECK-A)
Q703, 706
A-SOL
2
3
61 55
58 57
56
68 63
O-REC-MUTE
I-HP/AUDIO IN
I-MIC-DET
O-R2S15207FP-DATA
O-AUDIO-CLK
O-R2S15208SP-DATA
I-STREAM
I-VACS
45
43
44
42
4
O-REC/PB
AM ANT
O-SOL-B 35
TRIGGER PLUNGER
DRIVE (DECK-B)
Q702, 705
B-SOL
D921
O-BIAS
R-CH
I-LC23003-DI
O-LC23003-DO
O-LC23003-CLK
O-LC23003-CE
SYSTEM CONTROLLER
IC901 (2/4) (EXCEPT RG490: MX/RG590: MX)
IC901 (2/4) (RG490: MX/RG590: MX)
RDS-DATA
RDS-CLK
RDS DATA
RDS CLK
D
BAND-PASS
FILTER
Q111, 112
TUNER-L
PLL DO
PLL DI
PLL CLK
PLL CE
(Page 25)
REC AMP
IC401
M
TUNER (FM/AM)
FM ANT
TUNER-R
AM
4
DECK-A/B
SELECT SWITCH,
REC/PB
SELECT SWITCH
Q405, 406, 408
BIAS OSC
Q453
FM75Ω
COAXIAL
16 15
R-CH
R-CH
L451
BIAS OSC
ANTENNA
SAOUT
MUTING
Q305
DATA
CLK
3 6
L-CH
(Page
25)
F
(Page
25)
G
(Page
25)
R-CH
2 LIN
1 TUNERL
PB SWITCH
(DECK-B)
Q303
E
R-CH
39 TAPEL
DATA
CLK
A
: MIC
INPUT SELECTOR, TONE CONTROL,
ELECTRICAL VOLUME
IC101 (EXCEPT RG490: MX/RG590: MX)
IC101 (RG490: MX/RG590: MX)
EXCEPT RG490: E3
/RG590: UK, E3
MIC1
MIC2
C
: REC
RG490: E2, E51/
RG590: E2, E51, AR
RDS-DATA, RDS-CLK
(RG590: UK)
HCD-RG490/RG590
24
24
I-TCM-SYNC 73
36 O-TCM-SYNC
I-HALF-A
I-HALF-B
I-RELL-A
I-RELL-B
I-REC-SW
30
27
31
28
29
A-HALF
B-HALF
A-PHOTO
B-PHOTO
B-REC-F
HCD-RG490/RG590
7-3. BLOCK DIAGRAM – AMP/VIDEO Section –
HP IN
G
BASS AGC
+
R-CH
(Page 24)
R-CH
IC251 (EXCEPT RG490: MX/RG590: MX)
IC251 (RG490: MX/RG590: MX)
E
OUT
IC441 (RG490)
IC441 (RG590)
JK441
–1
BUFFER
POWER AMP
+
–
–
+
(Page 24)
–2
STANDBY SWITCH
Q489 (RG490)
Q489 – 491 (RG590)
MUTING
Q251
C
(Page 24)
J701
PHONES
R-CH
L
SPEAKER
R
RY441
R-CH
TH441
RELAY B+
OVER LOAD
DETECT
Q441
TEMPERATURE
DETECT
Q483, 484
DC DETECT
Q481, 482
FAN MOTOR
DRIVE
Q043 – 045
R-CH
M
M001
(FAN)
D035
+
R-CH
TEMPERATURE
DETECT
Q503, 507
F
SW OUT
BUFFER
Q276
LINE AMP
Q277
BUFFER
Q271
PROTECTOR
Q485
+
+
+
+
OVER LOAD
DETECT
Q501
DC DETECT
Q505, 506
FAN MOTOR
DETECT
Q046
RELAY DRIVE
Q486, 488
PROTECT
DETECT
Q487
+
JK501
POWER AMP
IC501
+
–
(Page 24)
MUTING
Q272
SUB WOOFER OUT
RY501
RELAY DRIVE
Q502
MUTING
CONTROL SWITCH
Q261
SUB WOOFER
SWITCH
Q274
PROTECT
(RG490: MX/RG590: MX)
O-SWR
41
I-PROTECTOR
49
22
H
(Page 26)
J803
3 DATA
5 SFSY
4 SBSY
SCHMITT
TRIGGER
IC1005
EXCK
1, 2, 24, 25
(Page 24)
VD0 – VD3
RDS-DATA, RDS-CLK
RDS-CLK
VA0 – VA7
3
22
4
23
13
28
14
26
XWE
XOE
XRAS
XCAS
MUTE 6
LEVEL SHIFT
Q1005, 1009
XRESET 54
LEVEL SHIFT
Q1002, 1006
DEN 52
59
60
NTSC/PAL
SELECT SWITCH
Q1001
D
(RG590: UK)
GDET 37
15 – 22
WE
OE
RAS
CAS
VIDEO OUT
RDS-DATA
9 – 12, 14 – 17
A0 – A7
VIDEO AMP
IC1006
VIDEO MUTING
Q1010
2 CLCK
DQ1 – DQ4
D-RAM
IC1002
VOUT 44
XO1
SBSO
WFCK
SCOR
XI1
(Page 23)
46 48
64
CD GRAPHICS DECODER
IC1001
25, 27, 29, 30
B
SBSO, WFCK,
SCOR, EXCK
O-CDG-RST
/I-RDS-CLK
O-STK-MUTE
SYSTEM CONTROLLER
IC901 (3/4) (EXCEPT RG490: MX/RG590: MX)
IC901 (3/4) (RG490: MX/RG590: MX)
O-CDG-MUTE-DATA
/I-RDS-DATA
5
O-VMUTE
I-CDG-DET
21
O-SYS-XMUTE
(RG490: MX/RG590: UK, MX)
Abbrivation
MX : Mexican model
R-ch is omitted due to same as L-ch.
SIGNAL PATH
: TUNER (FM/AM)
+3.3V
: VIDEO
X102
14.31818MHz
HCD-RG490/RG590
25
25
HCD-RG490/RG590
7-4. BLOCK DIAGRAM – PANEL/POWER SUPPLY Section –
68 – 80
FL701
FLUORESCENT
INDICATOR
TUBE
45 – 58,
61 – 67
FLUORESCENT INDICATOR TUBE
/LED DRIVER
IC701 (2/2)
SO1
SI1
SCK1
CE
XRESET
S1 – S21
9
8
7
16
6
PT901
MAIN POWER
TRANSFORMER
SYSTEM CONTROLLER
IC901 (4/4) (EXCEPT RG490: MX/RG590: MX)
IC901 (4/4) (RG490: MX/RG590: MX)
77
76
78
75
74
VF
VF
I-VFD-DATA
O-VFD-DATA
O-VFD-CLK
O-VFD-CE
O-VFD-RESET
B+ SWITCH
Q041, 042
RELAY B+
G1 – G13
F904
RECT
D402
39 – 43
(RG490: MX/RG590: MX)
LED DRIVE
Q601 – 605
D908
(RG590)
O-FRONT-SP-RELAY 23
D601 – 605
(STREAM)
–27V
REGULATOR
Q902
–VFL
STREAM LED1
– STREAM LED5
CDG +5V
+5V
REGULATOR
IC1003
F905
AMP
SECTION
B+
B+ SWITCH
Q1007, 1008
(RG490)
F908
O-CDG-POWER 47
D622 (RG490/RG590: UK)
D623 (EXCEPT RG490/RG590: UK)
LED DRIVE
Q621
SUBWOOFER
S611 – 613,
S614 – 618 (EXCEPT RG490/RG590: UK),
S621 – 627,
S628 (RG490/RG590: UK),
S631 – 638,
S641 – 648 (EXCEPT RG490/RG590: UK)
RECT
D401
37 SW LED
F909
D301, 302
(RG590)
M+7V
+9V
REGULATOR
19 – 22
M+9V
D001
IC021 (EXCEPT RG490: MX/RG590: MX)
IC021 (RG490: MX/RG590: MX)
KEY1 – KEY4
+9V
REGULATOR
+9V
S671
VOLUME
ROTARY
ENCODER
10 I-VOL-A
11 I-VOL-B
IC011 (EXCEPT RG490: MX/RG590: MX)
IC011 (RG490: MX/RG590: MX)
ROTARY
ENCODER
12 I-JOG-A
13 I-JOG-B
+9V
REGULATOR
X1
X2
+3.3V
3
4
CD DSP +1.8V
+1.8V
REGULATOR
IC203
IC006 (EXCEPT RG490: MX/RG590: MX)
IC006 (RG490: MX/RG590: MX)
(EXCEPT RG490: MX/RG590: MX)
F906
EXCEPT
RG490: MX/
RG590: UK, MX
RECT
D001 – 004
MP3 +1.5V
69 O-STBY-LED
EVER +10V
RECT
D902 – 905
(RG490: MX/RG590: UK, MX)
PT902
SUB POWER
TRANSFORMER
D008
D007
80 I-XSIRCS-IN
POWER ON/OFF
RELAY DRIVE
Q002
PROTECT
DETECT
Q011
PROTECT
I-XRESET 10
65 I-KEY0
VDD (+3.3V)
RESET SWITCH
Q901
REGULATOR
Q903, 904
RESET SIGNAL
GENERATOR
I-AC-CUT 9
79 I-WAKEUP
IC902 (EXCEPT RG490: MX/RG590: MX)
IC902 (RG490: MX/RG590: MX)
AC DETECT
Q902
I-AC-PULSE 1
RECT
D910
X1 (16MHZ)
X2 (16MHZ)
XT1 (32.768KHZ)
XT2 (32.768KHZ)
O-POWER-RELAY 7
15
14
12
11
X902
16MHz
Abbrivation
MX : Mexican model
X901
32.768kHz
HCD-RG490/RG590
26
26
H
(Page 25)
D902
S601 – 606
RY901
VOLTAGE
SELECTOR
S901
D006
+1.5V
REGULATOR
IC303
(RG490: MX/RG590: MX)
REMOTE CONTROL
RECEIVER
IC610
(RG490: MX/RG590: UK, MX)
(AC IN)
X701
4.19MHz
D611
STNDBY
F907
RECT
D011 – 014
UNREG +16V
S672
(MULTI JOG)
RECT
D021 – 024
HCD-RG490/RG590
• Note For Printed Wiring Boards and Schematic Diagrams
Note on Printed Wiring Board:
• X : parts extracted from the component side.
• Y : parts extracted from the conductor side.
•
f : internal component.
: Pattern from the side which enables seeing.
•
(The other layers' patterns are not indicated.)
Caution:
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Parts on the pattern face side seen from
the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
Caution:
Pattern face side:
(Side B)
Parts face side:
(Side A)
Parts on the pattern face side seen from
the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
• Indication of transistor
C
Q
These are omitted.
B E
Q
B
C
E
These are omitted.
• Circuit Boards Location
Note on Schematic Diagram:
• All capacitors are in µF unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
•
f : internal component.
• 2 : nonflammable resistor.
• 5 : fusible resistor.
• C : panel designation.
CD-G board
(MX model)
BD board (MX model)/
CD board (EXCEPT MX model)
SW board
MOTOR (LD) board
KEY TOP board
(RG590: E2, E3, E51, MX, AR models)
SENSOR board
Note: The components identified by mark 0 or dotted line
with mark 0 are critical for safety.
Replace only with part number specified.
• A : B+ Line.
• B : B– Line.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
– CD/BD Boards –
no mark :CD PLAY
– CD-G Board –
no mark : CD-G PLAY
– Other Boards –
no mark : TUNER (FM/AM)
(
) : CD PLAY
〈〈
〉〉 : TAPE PLAY
{
} : TAPE REC
∗
: Impossible to measure
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production tolerances.
• Circled numbers refer to waveforms.
• Signal path.
F : TUNER (FM/AM)
J : CD PLAY
E : TAPE PLAY (DECK-A)
d : TAPE PLAY (DECK-B)
G : REC
N : MIC
f : AUDIO IN
L : VIDEO
• Abbreviation
AR
: Argentina model
E2
: 120 V AC area in E model
E3
: 240 V AC area in E model
E51 : Chilean and Peruvian models
MX
: Mexican model
KEY LEFT board
DRIVER board
TUNER (FM/AM)
MOTOR (TB) board
PANEL board
MIC. AUX. HP board
KEY RIGHT board
VIDEO-OUT board
(MX model)
TRANSFORMER board
SUB WOOFER board
SW-SP board
MAIN board
POWER board
DECK board
• Abbreviation
AR
: Argentina model
E2
: 120 V AC area in E model
E3
: 240 V AC area in E model
E51 : Chilean and Peruvian models
MX
: Mexican model
HCD-RG490/RG590
27
27
HCD-RG490/RG590
7-5. PRINTED WIRING BOARD – CD Board (Except RG490: MX/RG590: MX models) –
1
2
3
• See page 27 for Circuit Boards Location.
4
5
: Uses unleaded solder.
6
7
8
9
10
A
CD BOARD (COMPONENT SIDE)
CD BOARD
M
M401
(SPINDLE)
(CONDUCTOR SIDE)
S201
(LIMIT)
C401
B
C403
R280
C405
C406
R421
C
C104
22
21
15
IC402
R451
R104
R105
M
R109
R102
C272
28
C451
R107
R452
R110
R423
C109
R101
1
R277
R275
R108
7
8
14
M402
(SLED)
C219
31
D
C220
C101
C102
C232
C215
C268
120
C224
TP
(VC)
R291
C217
IC201
C205
C207
C206
C251
C223
C210
C203
C202
E
61
C254
R256
R207
MAIN
BOARD
CN301
C221
(Page 36)
C208
C261
R260
C256
C258
C230
R268
R267
R265
12
R322
R321
Q321
E
C273
R324
R323
C321
C303
C264
C227
1-868-067-
(12)
C322
F
A
C222
90
TP
(RFACI)
C323
C274
C204
91
R254
C257
R201
60
CN301
C265
R266
R202
CN102
C213
R255
C253
R258
C266
R271
R252
R253
C260
R250
C110
C201
C252
R203
R257
X201
C275
C267
C108
R270
C276
C214
R401
C292
R292
C218
1
30
C277
C424
R278
C105
C291
C103
C107
C271
R276
R103
C404
C301
C304
C112
R112
C113
R113
R111
C111
C226
4
3
5
1
IC203
OPTICAL PICK-UP BLOCK
(KSM-213DCP)
12
1-868-067-
HCD-RG490/RG590
28
28
(12)
HCD-RG490/RG590
• See page 57 for Waveforms.
7-6. SCHEMATIC DIAGRAM – CD Board (Except RG490: MX/RG590: MX models) –
• See page 62 for IC Block Diagrams.
• See page 66 for IC Pin Function Description.
C260 0.47
C261 0.01
R260 0
C273 470p
C264 1000p
C210
0.1
C208
0.1
TP
(RFACI)
R256
22k
C230
100p
C257
0.1
R265 4.7k
R250 1M
R258 220k
C265 0.1
R268 10k
C274
0.1
CN301
16P
C301
0.1
VC
R267
4.7k
C258 220p
VCC
R266
1k
R257
100k
R324
100k
C256
0.1
C221
0.1
C323
100
10V
R321
2.2
C322
1
C304
1
C303
10
E
D
R322
2.2
A
B
Q321
2SA2119K
R323
0
C
AUTOMATIC
F
POWER
C321
1000p
GND
CONTROL
LD
VR
PD
F+
TP
(VC)
T+
AVDD4
RFDCO
PDSENS
LD
AC_SUM
PD
EG_IN
RFC
RFACI
AVSS4
RFACO
AVDD3
BIAS
ASYI
ASYO
VPCO
VCTL
AVSS3
FILI
CLTV
PCO
FILO
SVSS
VDD
SVDD
VSS
SVDD
SSTB-MP3
C222 0.1
DATA
SVSS
TEST1
TCLK2
F-
M401
D
(SPINDLE)
SP+
C
SP-
JTAGTCK
B
SL+
JTAGTDI
A
C207 100 10V
JTAGTDO
C254 4700p
R255 1k
JTAGTMS
TRST
VSS
TEO
VDD
TEI
C213 0.1
F
DOUT
E
TEST
C267
5p
C266
10p
R270
1k
X201
16.9344MHz
C215
0.1
R271
1M
AVDD0
IOVSS2
CD DSP
IOVDD1
PLLVDD
IC201
CXD3014A-201R
FRDR
PLLVSS
FFDR
XVSS
TRDR
XTAO
TFDR
XTAI
R203
C218
0.1
R112 100
C202
0.1
C217
0.1
C291
470p
SFDR
AVDD1
IOVSS1
AOUT1
SSTP
VREFL
MDP
AVSS1
LOCK
AVSS2
VDD
AOUT2
VSS
C424
0.1
SVSS
COUT
VDD
SCOR
C2PO
GFS
XPCK
XUGF
SVDD
WFCK
SENS
SVSS
VDD
DFCT
XLAT
ACK-MP3
R423
10k
C404
0.1
FOK
REQ-MP3
XLAT-MP3
DATA2
CLOK
VSS
XRST
IREQ-MP3
XTACN
BCK
BCKI
PCMDI
PCMD
LRCKI
LRCK
IOVSS0
C219
0.1
VOUT
STBY
NC
C451
0.047
R451
22k
R292 100
IOVDD0
GND
R452
10k
VSS
VREFR
AVDD2
VIN
C232
0.1
C277 1
C292
470p
CN102
23P
C205
0.1
C276 1
R291
100
C201
100
10V
R111 100
0.1
SRDR
XVDD
R113 100
C251 470p
AVSS0
C206
C268
10p
(SLED)
C252 4700p
R252 10k
IOVDD2
TES1
C275
5p
C253 470p
FEI
R253 1k
C223
0.1
M402
FEO
R254 10k
C214
0.1
SL-
VC
R421
0
MIRR
SVDD
+1.8V REGULATOR
DATA
IC203
BH18LB1WG-TR
CLK-MP3
C224
0.1
D-MUTE
OPIN+
OPINPREVCC
CH1FIN
GAIN-SW
CH4CAPA
OPOUT
CH2FIN
CH1RIN
CH4IN
CH2RIN
CH3FIN
GND
CH3RIN
CNF4
POWVCC
MOTOR DRIVE
IC402
BA5947FM
R277 100
R110 100
VREF
SPINDLE/SLED
C272
0.1
XRST
(Page
39)
GND
XATCN
C271
0.1
MUTE
AVDD(3.3V)
R276
47k
CH2OUTF
COIL DRIVE,
R275
100
CH2OUTR
FOCUS/TRUCKING
R201
0
R278 100
R-CH
POWVCC
C204
0.1
A-GND
CH3OUTR
C203
100
10V
R202
0
L-CH
CH1PUTF
D-GND
CH1OUTR
C220
0.1
CH3OUTF
C227
1
C226
1
CH4OUTF
R207
0
D-OUT
CH4OUTR
DVDD(3.3V)
IREQ-MP3
R103 100
CLK
R105 100
DATA-MP3
R104 100
XLAT-MP3
R109 100
REQ-MP3
R108 100
ACK-MP3
R280
0
R107 100
XLAT
R102 100
SENS
R101 100
SCOR
C405
0.1
C406
0.1
HCD-RG490/RG590
29
29
SL-
SP-
C401
220
10V
SL+
R401
0
SP+
C107 220p
C109 220p
C104 220p
C105 22p
C103 22p
C101 22p
C102 22p
C108 220p
C110 220p
C112 22p
C113 22p
M+7V
C111 220p
M-GND
S201
(LIMIT)
HCD-RG490/RG590
7-7. PRINTED WIRING BOARD – BD Board (RG490: MX/RG590: MX models) –
1
2
3
• See page 27 for Circuit Boards Location.
4
5
: Uses unleaded solder.
6
7
8
9
10
11
A
BD BOARD (COMPONENT SIDE)
M
M101
(SPINDLE)
BD BOARD
IC303
S101
(LIMIT)
(CONDUCTOR SIDE)
C302
B
3
1
4
5
C305
C303
C255
R313
R351
C260
R419
C306
C316
28
22
21
15
R403
R353
C257
C313
R354
C
R405
R404
C252
C315
R302
16
1
R352
IC251
C314
17
64
IC301
R307
C312
C317
1
C259
7
8
14
C320
R305
32
C308
C309
49
33
R402
R410
48
R401
R409
R303
R191
R165
R201
R411
R408
C194
CN201
90
C181
C112
C15
C11
R121
C162
R181
R112
32
R161
1-864-566-
61
30
11
C16
Q10
C185
C161
R13
C151
C111
C17
R12
C18
R171
R11
C10
C125
IC101
R111
C195
(11)
31
CN101
E
R151
R423
C132 R141
C134
C133
TP
(RFACI)
R203
R142
R132
R133
OPTICAL PICK-UP BLOCK
(KSM-215DCP)
30
30
C141
C131
R143 C142
R131
HCD-RG490/RG590
31
R421 R422
C143
C122
C123
R204
60
C124
R10
11
1-864-566-
(11)
B
MAIN
BOARD
CN302
C186
C115
C171
C209
91
R182
C172
R172
X171
F
120
C196
E
C203
R406
1
C14
C182
C163
R412
R173
C174
C201
TP
(VC)
R114
C183
R162
C251
R113
C210
1
R407
C113
R251
C184
R205
C212
R163
R252
C114
D
C213
C310
C116
C211
C318
FB301
M102
(SLED)
C311
C307
R253
C258
M
R301
R306
(Page
40)
HCD-RG490/RG590
7-8. SCHEMATIC DIAGRAM – BD Board (RG490: MX/RG590: MX models) –
• See page 57 for Waveforms. • See page 62 for IC Block Diagrams.
• See page 66 for IC Pin Function Description.
C131 100p
C10
10
C142 1500p
R141
4.7k
C17
220
4V
R12
100k
C16
1
R132
10k
VC
C123
0.1
C122
0.1
VCC
C11
10
R10
3.3
(RFACI)
R133
180k
C15
0.1
R13 1
R121
15k
TP
C133
0.01
C141
0.1
R151
0
R131
1M
C124 330p
C143
0.1
R142 1k
R307
10k
R143
3.3k
C125
0.1
C132 0.47
C151
100
10V
R203
0
C307
0.1
C134
0.1
Q10
2SB1690KT146
R11
0
AUTOMATIC
E
E
D
D
A
A
B
B
C
C
F
AGND
SBSY/BCKIB
R351
100
BCKO
AVDD4
RFDCO
PDSENS
LD
EG_IN
PD
NC
RFC
AVSS4
RFACI
RFACO
ASYI
BIAS
ASYO
VCTL
VPCO
AVSS3
FILI
FILO
PCO
AC_SUM
LRCKI
AVDD3
R352
100
LRCKO
CLTV
PCMDI
AVDD5
SDI0
AVSS5
BCKI
DDVRSEN
BCKIA
PD
NC
D
C
B
VSS
B
C306 0.1
MICK
MIDIO
MIDIO
MILP
R403 100
MICS
R401 100
MP3STB
MP3RST
R173 0
C172
27p
C174
0.1
C113 3300p
F
TEST
E
F
R172
1M
C115
0.1
NC
AVSS0
AVDD0
IOVDD1
XVSS
CD DSP
XTAO
IC101
CXD3059AR
FRDR
FRDR
FFDR
XTAI
FFDR
XVDD
TRDR
TFDR
AVDD1
TFDR
AOUT1
SRDR
SRDR
SFDR
C183
R181
22
100 6.3V
C316
0.0022
C186
470p
AOUT2
VREFL
SFDR
AVSS1
IOVSS1
AVSS2
SSTP
VREFR
MDP
AOUT2
LOCK
AVDD2
VSS
C195
0.1
S101
MDP
R182 C184
22
100
6.3V
FOK
MIRR
NC
COUT
WDCK
C4M
VDD
SCOR
C2PO
GFS
XUGF
XPCK
WFCK
ATSK
SCLK
SENS
DFCT
VDD
CLOCK
XLAT
VSS
DATA
SYSM
XRST
EXCK
SBSO
LMUT
SQCK
RMUT
SQSO
IOVDD0
IOVSS0
NC
C203
100
10V
(LIMIT)
+1.5V REGULATOR
VIN
GND
R113 1k
AOUT1
C162
0.1
STBY
C111 3300p
TRDR
C185
470p
C308
47
4V
NC
TEI
DOUT
NC
C201
100
10V
VOUT
IOVDD2
XTACN
VCOI
VSSP
MIMD
TEST
VSSX
XI
XO
X171
C171
R171
22p 16.9344MHz 470
C181
0.1
C182
0.1
C309
0.1
TEO
IOVSS2
C318
0.01
R313
220
C312
0.1
EMPHI
TEST1
C317
0.01
C311
0.1
R111 1k R112 15k
E
R161
100
VDDP
C315
0.1
FEI
C114 470p
RESET
R306
0
FEO
EMPH
R114 15k
R305
100k
C313
0.1
F-
TP
(VC)
R402 100
VDD
DOUT
R301
100k
C314
47
4V
T-
CN101
16P
C112 470p
C161
0.1
STANBY
VDDX
VDD
VSS
AD0/PO00
AD1/PO01
AD3/PO03
AD2/PO02
R419 100
VC
XTSL
MICS
CKO/PO13/AD16
MILP
AD8
PO07/AD7
C116
100
10V
A
BCK
NC
IC301
TC94A34FG-002
AD4/PO04
MIACK
R404 100
MICK
AD9
PO06
/AD6
PO05
/AD5
R405 100
MIACK
MP3 DECODER
R302 10k
SRMSTB
C310
0.1
R353
100
VDDT
AD10
T+
F-
A
PCMD
VSS
PO10/CCE/AD13
VDDM
VDDT
F+
T+
T-
C
PO11/BUCK/AD14
PO08/AD11
R303
100k
C14
0.1
F+
D
LRCK
SDO0
PO9/AD12
VR
C18
1000p
R354
100
LRCKIA
NC
TXO
VDD
SFSY/LRCKIB
VSS
CKI/CLOCK/
IRQ/FIO
PIO0/SDI2/IO0
PIO3/IO3
PIO2/IO2
DATA
DDVROUT
MP3REQ
SDI1/
DDCR
SDO3/OE
PIO1/SDI3/IO1
AD15/CAS/
LD
PIO4/FI1/BUS0/IO4
PO12
PIO7/BUS3/IO7
CS/RAS/
PIO6/FI3/BUS2/IO7
SDO2
PIO5/FI2/BUS1/IO5
CONTROL
WE/SDO1
F
POWER
IC303
BH15FB1WG
R162
47k
C210
0.1
C196
0.1
C194
0.1
R165
0
C303
0.1
SCOR
SENS
R252
22k
WFCK
CLOCK
R251
10k
XLT
DATA
SBSO
EXCK
XRST
R191
0
R163 C163
100 0.1
XTACN
C302
0.1
FB301
C305
220
4V
CN201
31P
M+7V
M-GND
M-GND
MIACK
MILP
MP3-CS
MICS
MP3-GND
R253
10k
C259
0.1
C213
22p
MP3(3.3V)
MP3-RST
C251
6800p
FRDR
MDP
MP3-LP
FFDR
MIDIO
TFDR
MP3-DIO
TRDR
MICK
MP3-CLK
T-
MP3-ACK
F+
MP3REQ
F-
MP3STB
MP3-REQ
T+
MP3-STB
C258
0.1
MP3RST
C320
1000p
R205 0
C209
0.01
C257
0.1
AOUT2
R-CH
CH1OUTF
CH1OUTR
CH2OUTF
POWVCC
GND
CNF4
CH2OUTR
CH4OUTR
CH4OUTF
CH3OUTF
CH3OUTR
POWVCC
AVDD(3.3V)
OPOUT
IC251
BA5947FM-E2
XTACN
OUTVREF
SPINDLE/SLED
MOTOR DRIVE
MUTE
R412 100
C211
220p
GND
XTCN
CH2RIN
XRST
COIL DRIVE,
CH3RIN
DATA
R406 100
CH1FIN
R407 100
XRST
CH2FIN
CD-DATA
FOCUS/TRACKING
CH1RIN
XLT
CH3FIN
CLOCK
R408 100
CH4IN
R409 100
XLT
CH4CAPA
CD-CLK
C212
22p
SW
SENS
OPIN+
SCOR
R410 100
PREVCC
(Page 43)
R411 100
CD-SENS
OPIN-
R201
SCOR
C252
0.1
C255
0.1
C260
220
10V
A-GND
DOUT
D-OUT
DVDD(3.3V)
SFDR
D-GND
R204 0
D-GND
SRDR
AOUT1
L-CH
M101
(SPINDLE)
M102
WFCK
R423 100
WFCK
SBSO
R421 100
SBSO
EXCK
R422 100
EXCK
(SLED)
HCD-RG490/RG590
31
31
HCD-RG490/RG590
7-9. PRINTED WIRING BOARDS – CHANGER Section –
• Semiconductor
Location
1
Ref. No. Location
D701
D711
E-7
E-7
IC701
IC712
IC731
F-7
F-8
F-5
Q731
C-9
2
• See page 27 for Circuit Boards Location.
3
4
5
: Uses unleaded solder.
6
7
8
9
10
MOTOR (LD) BOARD
A
M751
(LOADING)
B
DRIVER BOARD
M
CN705
1
CN702
C751
2
CN704
1
2
R733
2
C
1
C737
Q731
12
1-687-133-
R734
C736
C735
(12)
JW710
CN703
R723
SENSOR BOARD
S711
ROTARY ENCODER
DISC TABLE
ADDRESS DETECT
D
E
R732
CN721
JW711
C741
4
R751
C752
R722
R721
JW712
1
CN741
JW707
R736
JW708
JW709
MOTOR (TB) BOARD
JW706
C715
R713
R701
D711
D701
R702
JW705
1
CN731
3
E
EXCEPT
RG490: MX/
RG590: MX
R711
IC701
R712
M741
(TABLE)
E
C
IC731
A
K
1-687-132-
1
M
IC712
1
C1
MAIN
BOARD
JW713
(Page 36)
12
JW704
(12)
JW714
JW703
SW BOARD
F
C2
CN701
MAIN
BOARD
JW702
(Page 40)
R731
RG490: MX/
RG590: MX
9
S751
DISC TABLE
OPEN/CLOSE
DETECT
OPEN
G
9
C731
JW701
CN742
1-687-134-
CLOSE
12
1-866-201-
12
(12)
CN751
2
1
H
12
1-687-669-
HCD-RG490/RG590
32
32
(12)
(12)
HCD-RG490/RG590
FIN
GND
RIN
FIN
GND
RIN
VM
VCC
VCC
OUT1
VM
RNF
OUT1
DRIVE
RNF
VREF
LOADING MOTOR
OUT2
• See page 62 for IC Block Diagrams.
7-10. SCHEMATIC DIAGRAM – CHANGER Section –
IC701
BA6956AN
CN721
2P
M751
R702
100
CN704
2P
LM-2
LM-2
LM-1
LM-1
C751
0.01
(LOADING)
R701
470
D701
MTZJ-T-77
5.1A
S711
ROTARY ENCODER
CN703
4P
E-3
E2
E-2
E1
E-1
VREF
E3
TABLE MOTOR
DRIVE
OUT2
DISC TABLE
ADDRESS DETECT
IC712
BA6956AN
R721 4.7k
R723 4.7k
R722 4.7k
C737 0.1
0.1
0.1
C735
C736
GND
R712
4.7k
D711
MTZJ-T-77
3.6B
M741
(TABLE)
CN731
3P
SENS-IN
IC731
RPI-576
SENS-OUT
GND
CN742
5P
CN741
3P
SENS-IN
SENS-OUT
TM-2
TM-1
TM-1
SENS-OUT
GND
GND
C715
100
16V
R713
22k
CN702
5P
TM-2
SENS-IN
R711
1k
CN701
13P
M+9V
RG490:MX/
M-GND
RG590:MX
LM-R
C741
0.01
LM-F
SENS-IN
TM-R
SENS-OUT
TM-F
GND
EXCEPT
M-GND
R736
390
(Page 37)
E-1
E-2
E-3
TBL ADDRESS SENS
D+3.3V
R734
12k
DISC TABLE
R732
10k
OPEN SW
R731
100
ADDRESS SENSOR
R733
1k
S751
DISC TABLE
OPEN/CLOSE
DETECT
OPEN
CN751
2P
OPEN SW
GND
Q731
DTC114ESA
CN705
2P
LEVEL
OPEN SW
SHIFT
GND
C731
10
50V
C752
0.1
CLOSE
HCD-RG490/RG590
33
33
R751
4.7k
(Page 41)
RG490:MX/
RG590:MX
HCD-RG490/RG590
EXCEPT
RG490: MX/
RG590: MX
DECK BOARD
MAIN
BOARD
CN201
D1
MAIN
BOARD
CN201
D2
6
E
E
E
Q409
Q410
Q406
C401
R305
S
JR311
JW308
S
R316
JW310
3
R423
R406
C414
C418
R412
R414
R403
R413
S
1
CN302
G
C355
R307
8
R458
R431
E
JR402
C403
R433
R456
D
C354
CN301
1
R303
JW319
D
JW309
R301
Q301
G
C301
D
C302
S
C454
R429
Q403
C462
C452
E
R435
D
L451
BIAS OSC
R461
R462
C456
R465
R463
R464
JR307
6
1
4
3
Q453
G
D
R450
R457
JR302
G
JR303
C303
D
R302
R443
K
JW318
R315
Q302
E
G
Q402
A
A
E
C415
S
Q303
C356 R437
R430
R309
D
Q401
C317
C318
Q404
R466
C315
JR306
E
R432
R436
R438 S
Q407
R439
C458
R427
JW315
R444
R308
R449
C413
C411
C431
R428
R446
S
JW313
R311
R304
Q451
R445
R434
G
G
C304
5
1
IC401
C416
Q305
R317 4
C417
8
Q400
JW312
C461
C316
R313
JW314
R310
R407
4 R411
C412
D
Q306
C326
8
R312
R314
IC301
C307
R441
C325
C324
C406
R410
R320
C353
C323 1
R424
R453
E
C405
R404 5
R408
JW311
R318
R416
C410
JR310
R323
R319
R324
C433
R402
Q304
C
C328
C327
JR301
C352
R490
JW305
C351
JW303
R485
E
R454
R415
R409
C402
JW320
R326
R325
C404
D301
R401
R351
JW304
R482
JW301
C330
JW306
R488
R405
FB301
C329
R455
JW316
C350
R440
E
JW307
E
R442
R483
R452
C409
JW302
Q452
R451
R349
JW317
B
7
RG490: MX/
RG590: MX
CN008
R481
5
(Page 40)
(Page 36)
A
4
C430
D-2
D-2
D-3
D-3
D-3
D-3
C-4
D-5
D-5
D-5
D-5
B-1
B-1
D-4
B-2
B-3
B-4
C-7
B-7
D-7
3
R350
Q301
Q302
Q303
Q304
Q305
Q306
Q400
Q401
Q402
Q403
Q404
Q405
Q406
Q407
Q408
Q409
Q410
Q451
Q452
Q453
Q408
C-2
C-5
2
R489
IC301
IC401
1
R484
B-3
C-6
: Uses unleaded solder.
D401
Ref. No. Location
D301
D401
• See page 27 for Circuit Boards Location.
7-11. PRINTED WIRING BOARD – DECK Board –
Q405
• Semiconductor
Location
R460
R459
C453
R306
1-868-914-
E
HP1
(PB HEAD)
(DECK-A)
HRPE1
REC/PB/ERASE
HEAD
(DECK-B)
HCD-RG490/RG590
34
34
11
(11)
HCD-RG490/RG590
• See page 57 for Waveforms.
7-12. SCHEMATIC DIAGRAM – DECK Board –
Q405,406,408
DECK-A/B SELECT SWITCH,
REC/PB SELECT SWITCH
R350
0
8
R489
22k
Q408
2SA1235
C327 220p
Q406
2SA1235
C350 220 16V
R484
22k
R323
4.7k
R317
470k
C352
0.1
R490
4.7k
C329 0.047
R326 100
C330 0.047
C351
220
10V
C328 220p
Q405
2SC3052
R325 100
(PB)
R305
220k
Q301
2SJ460
R319
22k
C323
0.0047
C325
0.0022
C324
0.0047
C326
0.0022
R318
470k
C301
1000p
(DECK-A)
L-CH
Q302
2SJ460
R311
220
R-CH
C302
1000p
R302
47k
PB SWITCH
(DECK-A)
C317
10
50V
S
R315
100
S
IC301(2/2)
R312
NJM14558M-TE2 220
Q303
2SJ460
R314
47
R324
4.7k
CN301
3P
(DECK-A)
C318
10
50V
R320
22k
R301
47k
PB SWITCH
R313
47
PB AMP
R482
47k
HP1
S
R306
220k
R351
1k
R488
22k
R485
2.2k
R309
470
IC301(1/2)
NJM14558M-TE2
R483
22k
R481
4.7k
C315
47p
2
C353 0.1
R349
100
3
1
R310
470
5
C303
1000p
R304
47k
C304
1000p
PB SWITCH
(DECK-B)
6
7
R303
47k
R316
100
4
D301 UDZW-TE17-4.3B
C433 0.01
C401
0.1
50V
EXCEPT
RG490:MX/
RG590:MX
R401
47k
R403
22k
3
CN008
11P
1
PB-R
C411
10p
C405
220p
C403
47p
REC-R
(DECK-B)
R413
220k
R409
100k
R431
1k
R445
0
C356
10
50V
R429
10k
REC AMP
REC-L
R407
4.7k
C430
0.1
R415
2.2k
Q407
2SA1235
R435
10k
R411
470k
R405
47k
REC/PB SW
+9V
C413
220p
IC401(1/2)
BA4558
FB301
0
A-GND
R423
47k
C417
0.01
C431
0.1
R433
47k
R440
10k
C415
0.0047
R416
2.2k
O-BIAS
MUTING
R307
4.7k
NC
C404
47p
R406
47k
RG490:MX/
C406
220p
RG590:MX
JR310
0
R402
47k
6
R404
22k
7
C412
10p
C307
0.01
C410
10
50V
R434
47k
C418
0.01
R424
47k
R412
470k
R410
100k
R438
0
C416
0.0047
S
Q400
2SK2158
S
Q402
2SK2158
R432
1k
R428
0
R436
10k
C462
470p
REC SWITCH
Q409,410
Q451,452
R466
0
R449
22
REC BIAS SWITCH
R450
22
R464
1k
R456
22
R462
2.2k
R455
10
R442
47k
R453
4.7k
1
R454
4.7k
Q452
2SC3052
Q409
RT1N431C
C453
0.001
Q451
KTA1271Y-AT
R452
47k
OSC
C458
0.0022
R458
4.7
HCD-RG490/RG590
35
R463
1k
R465
0
R459
0
R460
0
4
L451
BIAS
R457
22k
BIAS
JR402
0
5
3
C454
0.0047
Q453
2SC2001
R451
10k
R461
2.2k
6
2
Q410
RT1N431C
35
OSC
C452
47
16V
R441
0
C461
470p
MUTING
Q404
2SA1235
4
(DECK-B)
ERASE
MUTING
R-CH
L-CH
D401
MC2838
R414
220k
R446
0
C414
220p
HRPE1
(REC/PB/ERASE)
CN302
8P
Q306
2SC3052
R308
4.7k
R430
10k
5
REC CONTROL SWITCH
C355
0.01
R439
4.7k
IC401(2/2)
BA4558
C402
0.1
50V
MUTING
R444
100k
R437
0
S
C409
10
50V
DECK-D-GND
R408
4.7k
Q305
2SC3052
Q401
2SK2158
REC-MUTE
(Page 42)
C354
0.1
SWITCH
2
PB-L
(Page 38)
Q400,407
MUTING CONTROL
R443
10k
PB SWITCH
REC SWITCH
R427
0
8
S
Q304
2SJ460
C316
47p
Q403
2SA1235
C456
0.01
HCD-RG490/RG590
• See page 27 for Circuit Boards Location.
7-13. PRINTED WIRING BOARD – MAIN Board (Except RG490: MX/RG590: MX models) –
1
• Semiconductor
Location
2
7
8
9
JW121
JW205
M001
(FAN)
R382
C385
JW331
JW196
JW197
C388
C387
JW332
R365
R325
JW195
JW202
JW190
JW189
JW187
JW186
JW319
JW325
JW320
JW102
JW321
JW324
JW203
JW210
C066
C063
C064
C065
R283
JW294
JW301
JW300
R060
E
R290
R276
Q271
C276
C274
E
R267
Q251
R286
R285
JW276
C265
R263
JW277
R035
R036
JW273
Q277
R287
R271
E
JW274
JW275 A
R037
R034
EP031
A
JR114
K D035
12
1-869-003-
K
(CHASSIS)
RG490: E3/
RG590: UK, E3
EXCEPT
RG490: E3/
RG590: UK, E3
F1
MIC. AUX. HP
BOARD
CN801
J1
(Page 44)
(RG490)
HCD-RG490/RG590
36
R043
R279
R289 R268
R272
C278
C273
C271
R281 R042
JR115
E
E
R261
R032
Q272
R264
R251
R064
JW220
R280
Q261
JW272
C255
R253
R257
C253
JW271
JW270
R254
JW269
E
D031
R033
Q041
JW298
D012
JW297
JW112
JW221
C266
R262
R291
JW268
JW222
E
R277
36
POWER
BOARD
CN441
J2
(CHASSIS)
POWER
BOARD
CN441
(Page 46) (Page 48)
(RG590)
R049
Q043
R050
R039
R038
K1
E
TRANSFORMER
BOARD
CN907
(Page 58)
K2
TRANSFORMER
BOARD
CN907
(Page 60)
(RG590)
JW223
Q042
Q252
C259
A
R057
R274
JW302
C012
R252
C263
R063
JW315
Q011
A
C026
1
IC251
R059
E
D009
JW303
JW305
JW267
JW266
JW253
C171
JW264
JW256
JW254
JW255
JW310
C169
R145
JW252
JW251
R068
R265
JW309
R141
R162
K
E
R052
C260
C264
D007
11
RG490: E3/
RG590: UK, E3
R292
JW265
R155
R164
R156
JW249
JW250
JW247
R157
R103
D013
D014
D024
D023
D021
D022
R160
JW308
JW246
JW307
JW248
JR105
EP061
EXCEPT RG490/
RG590: UK
JW299
C032
R104
R167
R165
R016
C010 JW296
CN031
R250
R054
(RG490)
R041
JW106
JW288
JW283
JW282
JW226
JW236
R128
C164
C174
JW261
Q002
R001
C027
C254 C256
C035
E
E
R045
E R053
JW295
C011
Q045
K
D011
13
R269
R047
R061
JW322
JW214
JW103
JW185
JW184
JW110
JW183
JW182
JW181
JW180
JW179
JW178
JW177
JW176
JW167
JW225
JW235
R166
R168
C386
JW193
JW192
JW032
JW118
JR109
JW339
JW101
JW171
JW105
R319
JW170
JW169
JR110
R322
R321
JW165
JW175
JW174
JW173
JW239
JW224
JW232
JW234
R170
A
Q044
CN001
C013
E
C257
A
R006
1
C031
C258
G
D
R005
Q276
EXCEPT RG490/
RG590: UK
C148
R148
JR122
5
R152
CN061
JW263
R142
R153
1
C167
R143
R106
(RG590: UK)
C168
JW260
JW323
JW314
JW206
JW281
C153
R135
C133
JW245
C116
R144
R139
EXCEPT
RG490: E3/
RG590: UK, E3
C170
JW311
C177
IC1026
10
R169
C129
C141
R120
C157
C160
C281
C172
R140
EXCEPT RG490/
RG590: UK
R178
C176
R131
(RG490/RG590: UK) R137
C173
C165
R136
R147
C143
R014
JW286
R163
JR121
C151
C139
R161
C147
IC101
Q114
R158
R046
S
Q046
D036
1
(Page 50)
R048
JW293
R013
JW287
R154
R056
JW292
R051
R055
Q274
E
JW207
JW289
C023
JW257
C112
E
C142
R138
C178
C166
C156
C155
R171
C145
C149
C135
11
R132
R159
E
1
C275
JW291
D003
IC021
3
JW285
R177
20
10
C008
JW238
JW284
C163
C175
1
(RG590: UK)
C125
21
C152
R151
JR123
R134
R123
C137 R125 R175
30
C159
JR102
JR101
R133
R124
R172
(RG490/RG590: UK)
C114
31
C123 (RG590: UK)
40
C134
JW242
J
C154
C120
R119
JW316
C110
D001
SUB WOOFER
BOARD
CN501
C034
CN271
JW241
C150
C146
R122
JW262
R121
3
C025
JW278
JW279
C140 Q113
C130
C144
JW240
RG490: E3/
RG590: UK, E3
I
C124
JW243
R101
C122
EXCEPT
RG490: E3/
RG590: UK, E3
R130
JW237 (RG590: UK)
C136
C126
JR107
R202
(RG590: UK)
C121
C138
C109
R904
JW172
R126
R201
JW258
JR104
JW259
R176
C115
R105
C267
(Page 34)
R999
R997
JW233
JW228
CN201
DECK
BOARD
CN008
C068
JW227
C069
R110
R102
D1
D004
D006
C158
R109
R113
R111
E
JW231
R941
R114
R112
Q111
JW208
C002
D002
(NC)
CN091
C001
JW313
R010
R011
D943
A
Q112
E
R108
C117
H
K
A
C111
JW230
R949
R951
IC006
IC011
C015
JW280
JW229
A
R943
C119
G
JW218
R950
R942
R946
C118
JW217
JW219
R944
D921
K
A/K
C921
JW341
H1
1
JW216
R947
D947
JW329
JW215
JW164
A
D923
A/K
CN991
R355
K
R948
R945
R914
C922
R351
RG490: E2, E51, AR/
RG590: E2, E51, AR
JW330
3
R353
JW244
R352
K
1
C006
JW312
R354
R350
F
R349
JR119 C923
JW152
R116
(RG490/RG590: UK)
(RG590: UK)
JR103
R996
JW150
JW148
R356
JW151
JW146
JW147
D008
A
3
R902
R901
R912
E1
PANEL
BOARD
CN601
A
C007
A C902
JR111
JR112
R363 R366
R326
JW158
JW290
K
D902
R364
JR118
JW213
C901
D901 E
Q904
JW159
JW108
K
JW144
E
JW168
JW143
JW163
R910
2
IC902
D905
JW157
R903
1
JW162
JW166
JW161
JW160
E
D910
4 3 C904
Q903
R907
C908
C906
JW145
C927
Q901
C909
JW149
R935
R905 R909
E C919
R932
JW141
C913
C914
Q902
R982
(Page 54)
R908
C910
R911
E
C920
JW137
C911
R913
C305
JW156
JW140
R973
2
RG490: E3/
RG590: UK, E3
D302
C926 X901
R936
R922
CN041
(RG590: UK)
11
1
22
C916
R918
1
3
C033
JW188
X902
R381
1
1
JW212
R919
1
CN301
D301
JW139
D
JW122
23
R070
13
C391
JW117
20
C903
JW119
C917
61
R974 80
R972
R318
JR108
21
C918
JR117
JR120
C317
R963
JR106
60
SUPPLIED WITH THE
ASSEMBLED BLOCK
R383
R324
R323
R967
R969
IC901
JW154
JW133
R965
JW155
40
R315
R317
R953
JW153
C912
TUNER(FM/AM)
M
(Page 32)
DRIVER
BOARD
CN701
R316
JW129
R956
C1
(Page 28)
CD BOARD
CN102
A
JW306
R920
41
R981
R957
R959
R925
JW132
C
JW136
R348
(RG590: UK) R961
JW126
(RG590: UK)
R971
JW127
R980
JW130
R955
JW131
AM
R344
R342
R970
R975
JW125
JW135
R979
R923
R924
JW134
R921
B
R345
R346
R347
R341
R343
JW124
JW123
R129
Note: IC901 on the MAIN board cannot exchange with single. When
IC901 is damaged, exchange the entire mounted board.
10
ANTENNA
FM75Ω
COAXIAL
R976
JW340
JW116
C924
C268
G-9
H-9
H-9
H-9
G-9
G-9
G-9
F-9
G-2
G-2
H-4
H-4
J-7
I-7
J-9
I-8
I-9
F-9
I-5
J-9
D-3
D-2
E-3
E-3
JW115
C925
R127
Q002
Q011
Q041
Q042
Q043
Q044
Q045
Q046
Q111
Q112
Q113
Q114
Q251
Q252
Q261
Q271
Q272
Q274
Q276
Q277
Q901
Q902
Q903
Q904
E-7
F-7
G-7
I-3
I-4
I-7
C-2
E-3
6
JW120
R952
(RG590: UK)
JW142
IC006
IC011
IC021
IC101
IC102
IC251
IC901
IC902
5
A
JW128
F-8
F-8
F-8
F-8
G-9
H-9
E-7
H-9
G-7
H-7
G-7
G-7
G-6
G-6
G-6
G-7
J-7
J-8
G-9
D-3
D-4
E-3
E-3
E-3
D-3
F-2
F-2
G-2
F-2
4
MAIN BOARD
Ref. No. Location
D001
D002
D003
D004
D006
D007
D008
D009
D011
D012
D013
D014
D021
D022
D023
D024
D031
D035
D036
D301
D302
D901
D902
D905
D910
D921
D923
D943
D947
3
: Uses unleaded solder.
(12)
HCD-RG490/RG590
• See page 57 for Waveforms. • See page 66 for IC Pin Function Description.
7-14. SCHEMATIC DIAGRAM – MAIN Board (1/3) (Except RG490: MX/RG590: MX models) –
(1/3)
M-GND
(RG590:UK)
22k(RG490)
VF
C924
100p
(RG590:UK)
-VFL
R980
100
D-GND
TCM-SNYC
I-MIC-DET
TCM-SYNC
LM-R
C-LF
LM-F
C-TR
TM-R
C-TF
TM-F
C-E1
E-1
C-E2
E-2
(Page
33)
E-3
TBL ADDRESS SENS
C-SE
R925
1k
D+3.3V
OPEN SW
C-OS
R952
47k
VDD(EVER)
C-LR
C-E3
R961
1k
R955 1k
R971 100
R979 100
R921 100
4.7k(RG590:UK)
R923 100
C912 0.1
2.2k(RG590:E2,E3,E51,AR)
VF
R924 100
C925
100p
∗R355
13
M-GND
(RG590:UK)
CN991
19P
M+9V
G-5
T-DI
T-CE
T-CL
T-DO
G-3
G-6
C-3
C-6
C-5
P-DA
PM-CL
M-DA
C391
0.1
1
R920
470k
VDD(SWITCHED)
∗R354
STBY-LED
STBY
KEY0
KEY0
1k(RG590)
RG490:E2,E51,AR/
22k(RG490)
RG590:E2,E51,AR
R346
1k
M-GND
M-GND
C-E1
R347
22k
R345
10k
R922 220k
I-PROTECTOR
KEY0
O-CDG-RST/
I-RDS-CLK
O-LC23003-CE
O-VMUTE
I-LC23003-DI
I-CDG-DET
O-LC23003-DO
I-SUFFIX
C918 0.001
I-VACS
PROTECT
I-XM-RXD
I-HP/
AUDIO IN
R349
10k
O-LC23003-CLK
VACS
LED-GND
R350
10k
R354
∗
O-CDG-POWER
M+9V
I-HP-AUX
R341
10k
O-CDG-MUTE-DATA/
I-RDS-DATA
R342
1k
VCE
R352
1k
O-XM-TXD
R997 100
R351
10k
R355
∗
R356
1M
O-CD-DATA
C-E2
R344
22k
R348
22k
I-CD-SENS
R343
22k
VCL
VFD-CLK
VFD-CE
C-E3
VDI
I-MIC-DET
VDO
O-CD-CLK
R999 100
VFD-DO
O-R2S15208SP-DATA
VFD-DI
O-AUDIO-CLK
VRE
O-R2S15207FP-DATA
R996 100
AVSS
(Page 56)
VFD-RESET
(RG590:UK)
(RG490/RG590:UK)
AVREF
RMS
SIRCS
R956 100
R957 100
IXTUNED
R959 100
C-OS
R970 100
C-SE
R975 100
C-TF
I-OPEN-SW
I-CD-NUMBER-SENS
R913 1k
I-KEY0
O-TM-F
I-CD-ENCODER
O-TM-R
R353 10k
I-MODEL
R976 100
C-TR
R969 100
C-LF
R967 100
C-LR
O-LM-F
STREAM
I-STREAM
O-LM-R
SYSTEM CONTROLLER
STBY
O-STBY-LED
C-12
C-8
O-XRST
IC901
µPD7BF0547GGC (S)
-UBT-A
R981 100
O-MP3-CLK
R974 100
C-11
CN091
9P
TCM-SYNC
RESET
VRE
VDD
VCE
O-MP3-DATA
I-MP3-REQ
I-TAPE-SYNC
O-XLAT/
O-MP3-STB
R972 100
FLMD
O-VFD-CE
O-MP3-XLAT/
O-MP3-CS
O-VFD-DATA
O-MP3-RESET
C923 220p
VDO
VDI
R973 100
VCL
R982 470
C-15
R963 100
C-13
C-9
MP3-RST
FSP
O-FRONT-SP-RELAY
XT1(32.768KHZ)
O-SWR
R953
10k
EVDD
VDD
EVSS
VSS
X1(16MHZ)
SYS-M
O-SYS-XMUTE
REGC
X2(16MHZ)
O-SWR
FLMDO
XT2(32.768KHZ)
I-XRESET
I-AC-CUT
I-AC
-PULSE
SO
O-SW_GAIN
I-XSIRCS
-IN
O-REC/PB
220p
O-REC-MUTE
I-WAKEUP
C926
O-STK-MUTE
RMS
SI
O-BIAS
SCK
R911 1k
O-XM-POWER3.3
O-POWER-RELAY
O-VFD-CLK
KEY0
C-14
C-1
(NC)
VSS
R965 100
O-XTCN
I-VFD-DATA
VSS
C-10
I-MP3-ACK
O-VFD-RESET
AVREF
C-4
O-D-MUTE
O-XLT
O-MP3-CS/
O-MP3-LP
I-MP3-DATA
FLMD
C-7
I-SCOR
Q903,904
Q903
KTA1271Y-AT
Q901
2SC3052
REGULATOR
RESET SWITCH
R918 220k
D910
1SS355TE-17
A1
A2
A3
Q902
2SC3052
A4
AC DETECT
A5
C913
1p
C920
1p
FLMD
C914 22p
C927 22p
C910 0.1
C919 0.1
P-RELAY
R932
2.2k
STK-M
C904
0.1
ACP
JW339
C911
0.001
O-BIAS
R935
10k
IC902
PST3429UL
REC-MUTE
GENERATOR
A6
C901
100
16V
C916
47000
5.5V
R902
0
D901
UDZW-TE17-4.7B
D923
MC2840
R948
2.2k
R944
220k
R901
100k
D902
MC2836
R914
10k
C917
0.1
R950
4.7k
D943
MC2838
R904
2.2k
X902
16MHz
RESET SIGNAL
O-R/P
(Page 39)
C902
10
50V
R949
10k
R912
1k
C903
0.47
50V
R936
22k
D921
MC2840
R946
0
B3
R951
220
R947
220k
C922
4.7
50V
B4
R945
220
VACS
D905
1SS355TE-17
X901 32.768KHz
C909
0.1
R919 0
Q904
2SC3052
R908
47k
D947
1SS355TE-17
R903
10k
C906
10
50V
R909
22k
STREAM
R905
10k
C908
0.1
PROTECT
R907
47k
C921
2.2
50V
R942
10k
R941
2.2k
(Page 38)
R943
4.7k
A7
B1
A8
R910 10k
B2
(Page 39)
(Page 38)
Note: IC901 on the MAIN board cannot exchange with single. When
IC901 is damaged, exchange the entire mounted board.
HCD-RG490/RG590
37
37
HCD-RG490/RG590
7-15. SCHEMATIC DIAGRAM – MAIN Board (2/3) (Except RG490: MX/RG590: MX models) –
• See page 62 for IC Block Diagrams.
(2/3)
(RG590:UK)
R172
0
R176
2.2k
(RG590:UK)
C136
220p
(Page 39)
R136
10k
C140
0.1
C130
1
50V
C152 0.022
C150 0.022
C4
C176
1
C144
0.047
(RG490/RG590:UK)
EXCEPT RG490:E3
INPUT SELECTOR,
RG590:UK,E3
TONE CONTROL,
RG490:E3
GND
O-R/P
R133
0
REC-L
C115
100
16V
A-GND
JR101
0
JR102
0
C109
4700p
10 50V
MIX2
OUTL
VCC
BB22
C110 10 50V
D-GND
AUX-IN-Rch
R177
0
TONE
OUTL
MID22
MID12
TRE2
BASS22
BASS12
∗C155-158
0.15(RG490)
R141
22k
R139
1k
R161
22k
R163
47k
R162
22k
C153
1
50V
C175
1
R164
47k
C163
1
R156
220k
R155
220k
R158
220k
C139
0.1
Q114
2SC3052
C141
10
50V
R148 C148
47k 470p
R137 2.2k
Q113
2SC3052
R102
1k
R108
2.2k
R109
4.7k
R159
47k
R160
47k
C112
47
16V
(Page 45)
HP-GND
R-OUT
C134
0.1
R167 R165 R103
1k 4.7k 10k
R147 C147
47k 470p
(RG590:UK)
(RG490:E3/RG590:UK,E3)
(RG590:UK)
C135
220p
R135
10k
C069
1000p
(Page 37)
C119
2.2
50V
R111
100k
B3
B4
Q112
2SC3052
Q111
2SC3052
C117
0.001
R116
100
R154
1M
A-GND
AUX-IN-Lch
C111
22
50V
R113
4.7k
Q113,114
BASS AGC
R145
47k
Q111,112
BAND-PASS FILTER
R157
220k
C151 0.022
C149 0.022
C145 4700p
R127
∗
R131
100
RG490/RG590:UK
C143 0.047
R129
∗
C116 1 50V
R171
0
EXCEPT
C129
1
50V
C137 1 50V
(RG590:UK)
I-HP-AUX
R168 R166 R104
1k 4.7k 10k
∗
(RG490/RG590:UK)
D-GND
O-HP/AUX
PM-CL
470k(RG490:E3,RG590:UK,E3)
R106 1k
MIC SIG
C155
0.18(RG590)
R068 10
MIC +9V
∗
C173 47p
VOLINL
47k(EXCEPT RG490:E3,/RG590:UK,E3)
I-MIC-DET
O-MIC-DET
C157
C123
47p
11P(EXCEPT RG490:E3/RG590:UK,E3)
M-DA
R143 220
BB12
SAOUT
R105 100
∗R129,130
R144 220
R119 470
C159 220p
(EXCEPT RG490:E3/RG590:UK,E3)
CN061
R120 470
C160 220p
CLK
CDL
R175
2.2k
R140 R178
0
1k
DATA
MIX1
C125 1 50V
R125
4.7k
C281
0.01
C158 ∗
TAPEL
9P(RG490:E3/RG590:UK,E3)
P-DA
OUTR
IC101
R2S15207FP
C114 0.1
R121
100
R142
22k
C174 47p
C267 4700p
C268
R152
100
R153
100
C177 1
BB11
SURROUNDR
RECOUTL
R201 2.2k
R134
0
C165 1
VOLINR
C122 0.047
R101 10k
AUXL
PB-L
R202 2.2k
R151
100
BB21
TUNERL
PB-R
C169
0.01
C156 ∗
SURROUNDL
(Page 35)
CLK
(EXCEPT RG490/RG590:UK)
C121 100 16V
REFIN
REC-R
PM-CL
DATA
TONE
OUTR
MID21
MID11
TRE1
BASS21
BASS11
AUXR
RECOUTR
CDR
TAPER
C120 0.1
R123
2.2k
TUNERR
C124 47p
R122 100
O-BIAS
REC/PB SW
C171
100p
GND
C166
1
(RG590:UK)
DECK-D-GND
REC-MUTE
C170
100
16V
VCC
C178
1
RG590:UK,E3
+9V
C154
1
50V
C164
1
ELECTRICAL VOLUME
CN201
11P
NC
REC-MUTE
C172
100p
ROUT
1k(EXCEPT RG490:E3/RG590:UK,E3)
O-BIAS
REF
OUT
RIN
2.2k(RG490:E3/RG590:UK,E3)
(Page 37)
REF
IN
LIN
LOUT
B2
R070
10k
(Page 39)
IC102
R2S15208SP
C167
100
10V
∗R127,128
B1
D3
PARAMETRIC EQUALIZER
C3
R128
∗
D2
C168
100
10V
R138
2.2k
C146 4700p
R132
C126 100
1
50V
R130
∗
C142 10 50V
R126
R124 4.7k
2.2k
C2
C138 1 50V
C1
D1
C133
0.1
R110
47k
R114
2.2k
C118
2.2
50V
(Page 39)
R112
470
D4
C068 1000p
C066 1000p
D5
C065 1000p
HP-GND
L-OUT
EP061
C063
0.1
C064
0.001
D7
D8
D9
(CHASSIS)
D10
(Page 39)
HCD-RG490/RG590
38
38
HCD-RG490/RG590
7-16. SCHEMATIC DIAGRAM – MAIN Board (3/3) (Except RG490: MX/RG590: MX models) –
(3/3)
R265
100
Q261
RT1P141C-TP-1
C259
10
50V
∗R250,253
4.7k(RG490)
C263
470
16V
10k(RG590)
A1
∗R254,257
A2
R292
2.2k
A3
R263
2.2k
C264
1000p
R261
10k
BUFFER
2.7k(RG490)
Q251
2SC3052
IC251
BA4558F-E2
4.7k(RG590)
MUTING
A4
C256
22p
A5
(Page 37)
R251
470
R253
∗
A6
C255
22p
R291 R257
2.2k
∗
D2
R274
4.7k
Q276
2SC3052
R276
10k
BUFFER
Q271
2SC3052
BUFFER
C271
0.047
R286
22k
SW-SIG
C273
0.22
C266
4.7
50V
R277
2.2k
Q277
2SC3052
C276
0.22
C274
10
25V
R279
2.2k
R280
4.7k
SW-SIG GND
SW-ON/OFF
Q272
2SC3052
R287
470k
MUTING
R272
4.7k
C278
0.1
MUTING
LINE AMP
(Page 51)
CN271
3P
C275
470p
R281
2.2k
R250 R254 C258
∗
∗
47
16V
C253
47p
R285
10k
MUTING CONTROL SWITCH
R268
4.7k
R267
47k
Q252
2SC3052
C254
47p
C265
4.7
50V
C260
10 R252
25V 470
D1
R262
10k
R264
2.2k
R052
470k
R271
0
R269
2.2k
R289
100k
R290
1k
SYS-M
C257
47
16V
D3
(Page 38)
Q274
RT1N431C-TP-1
SUB WOOFER SWITCH
O-SWR
R283
10k
FSP
Q043-045
R056 10k
FAN MOTOR DRIVE
STBY R
D002 10EDB40
R006
4.7k
P-RELAY
D004 10EDB40
Q002
2SC3052
Q042
KTA1271Y-AT
R042
10k
R043
4.7k
D001 10EDB40
+9V REGULATOR
IC011
TA7809S
D011 10EDB40
+3.3V REGULATOR
R010
22k
IC006
TA78033LS
O G I
C015
100
16V
R011
10k
O
D007
UDZW-TE17-4.7B
PROTECT
DETECT
(Page 38)
R016
100k
G
Q045
2SC3052
R050
2.2k
I
R055
2.2k
C007
22
50V
C006
10
50V
R001
22
+9V REGULATOR
R047
2.2
R046
4.7
R048
22
R061
10
C033
100
16V
R051
2.2k
Q046
2SK2158
R049
220k
FAN MOTOR DETECT
C013
2200
25V
S
C034
4.7
50V
EP031
(CHASSIS)
D022 10EDB40
C023
2200
25V
O G I
C025
100
16V
(FAN)
FAN+
D021 10EDB40
IC021
TA7809S
R014 C010
10k
0.1
M001
FAN-
R045
1k
Q041
2SC3052
D014 10EDB40
CN041
3P
FAN+
R053
22k
R054
22k
D013 10EDB40
R013
22k
D5
C035
47
25
D035
MC2838
D008
MC2838
Q011
RT1N141C-TP-1
Q041,042
B+ SWITCH
R057
1k
D012 10EDB40
D006
1SS355TE-17
PROTECT
C001
0.1
C011
0.1
C012 0.1
D009
MC2838
R041
0
Q044
2SC3052
D036
MC2836
D003 10EDB40
C008
2200
25V
RELAY DRIVE
R039
22
1/2W
Q043
KTA1266GR
POWER ON/OFF
R005
4.7k
R038
C002
0.1
R036
4.7k
D023 10EDB40
R035
4.7k
SP L-OUT
(RG490)
D024 10EDB40
SP-GND
R033
22k
SP R-OUT
T-DI
D
A
B
R034
22k
SP RELAY B+
PROTECT
PROTECT
(Page 47)
R-OUT
T-CE
T-CL
G-6
G-5
D302
10EDB40
T-DO
C-7
C-6
C-15
C-13
C-10
C-5
C-9
C-11
C-8
C-14
C-1
C-4
C-3
(Page 37)
A7
C-12
C
D4
R059
1k
2W
R060
1k
2W
AMP-A-GND
L-OUT
A8
GND
(RG590)
CN031
13P
100p
100p
100p
C388
C385
R366
0
R326
22k
R037
4.7k
R363
0
R365
0
R325
22k
D031
R032
1k 1SS355TE-17
D10
D8
C1
C4
C3
D9
1
C2
TUNER-L
+9V
TUNER-R
GND
N/C
PLL CE
PLL DI
PLL CLK
RDS CLK
11
RDS DATA
(RG590:UK)
PLL DO
M+7V
M-GND
SCOR
SENS
XLAT
REQ-MP3
R364
0
D7
ACK-MP3
XLAT-MP3
DATA-MP3
CLK
IREQ-MP3
XRST
XTACN
AVDD(3.3V)
R CH
A-GND
D-OUT
L-CH
D-GND
DVDD(3.3V)
CN301
23P
D-MUTE
(RG590)
CLK-MP3
ACP
-VFL
DATA
ACP
STBY R
470p
C317
1000
10V
EVER +10V
C386
D-GND
C387
R324 100
R323 100
VF
(Page 61)
-VFL
R063 100
VF
TUNER (FM/AM)
(Page 29)
(Page 49)
STK MUTE
R064 100
R321 100
D
PWR-GND
C032
1000p
C031 0
(RG490:E3/RG590:UK,E3)
R322 100
AC4
STK-M
JW032
C305
1000p
R318 100
C
R319 100
AC4
R317 100
B
R383 1k
D301
10EDB40
RG590:UK,E3
A
AC3
STBY RELAY
R382 1k
RG490:E3/
C027
0.01
R315 100
(Page 59)
AC3
R316 100
CN001
11P
(RG490)
R381 1k
UNREG +16V
C026
0.01
SUPPLIED WITH
(Page 38)
THE ASSEMBLED
BLOCK
FM75Ω
AM
COAXIAL
ANTENNA
HCD-RG490/RG590
39
39
(Page 38)
HCD-RG490/RG590
• See page 27 for Circuit Boards Location.
7-17. PRINTED WIRING BOARD – MAIN Board (RG490: MX/RG590: MX models) –
1
• Semiconductor
Location
6
7
8
9
R340
R339
R316
JW193
JW197
JW331
JW196
JW332
R325
JW195
JW202
JW319
JW325
JW320
JW321
D008
JW214
JW203
C147
R147
C064
R006
JW294
JW112
JW300
D031
R033
R060
R290
JW273
R274
Q041
C276
C265
E
Q277
R287
JW277
R271
E
Q261
R286
R285
JW276
Q251
E
R281
R042
R280
C278
R272
C273
JW271
JW270
R279
R289 R268
R276
C274
C266
R263
JW274
R032
R037
JW275
R034
A
A
JR114
EP031
K
D035
11
1-868-901-
K
F2
(CHASSIS)
MIC. AUX. HP
BOARD
CN801
J3
(Page 44)
(RG490)
HCD-RG490/RG590
40
40
R043
D012
JW297
JW298
R064
R103
JW269
R251
R059
JW268
R167
R165
C259
E
Q271
R267
JW264
JW256
R254
R291
E
R264
Q252
IC251
C264
R269
R104
JW301
D013
D014
JW303
JW305
JW255
JW254
JW310
JW253
JW267
C257
E
R036
R166
R252
C254 C256 C263
POWER
BOARD
CN441
(Page 46)
J4
(CHASSIS)
POWER
BOARD
CN441
(Page 48)
(RG590)
R045
JW106
JW302
D024
D023
D021
D022
R068
R265
JW309
R141
JW252 R142
JW251
C169
R118
R292
R145
(RG590)
C260
R047
R061
JW322
JW290
JW283
JW282
D006
R050
JW210
JW103
JW184
JW185
JW110
JW183
JW182
JW181
R160
R155
R156
JW249
JW248
JW247
JW250
C171
JW220
Q272
JR115
K3
E
R039
R041
TRANSFORMER
BOARD
CN907
(Page 58)
K4
TRANSFORMER
BOARD
CN907
(Page 60)
(RG590)
JW223
JW222
R277 C271
(RG490)
Q043
JW213
JW108
JW212
JW324
JW105
JW102
JW339
JW101
JR109
JR110
R315
R318
R321
JW170
JW171
JW179
JW167
JW225
JW239
JW224
JW226
R153
R063
C063
C388
C387
C386
C385
JW032
R323
JR108
R317
JW169
JW335
JW174
JW173
JW172
JW236
IC102
R168
CN061
R106
JW263
EP061
JW192
JW191
JW186
JW187
JW188
R324
JW163
JW165
JW161
JW235
5
R250
R035
JW281
JW314
1
A A
R057
JW221
1
R052
C258
R152
R143
JW261
JW206
JW323
(RG590)
C167
C026
CN031
JW272
R261 R262
C153
R135
R139
JW315
Q011
E
C255
R253
C116
R144
C160 JR121
C157
C170
D007
E
K
D009
E
E R053
R038
JW296
11
13
JW266
C165
C177
6
R054
C010
JW299
C031
C253
R257
JR122
10
R117
R131
(RG490)
C035
E
C027
Q045
Q044
R005
E
E
JW265
C141
R048
A A
D036
Q042
Q276
R148
C129
C172
C168
R120
C148
JW242
R140
R178
C155
R163
JW260
R129
C143
C174
C012
R046
D
JW295
R016
C281
R162
JW311
C139
JW245
R127
C125
R171
11
R137
JW244
C145
C149
C151
10
C159
20
C158
(RG590) C166
21
C156
JR123 1
R134
R133
R123
R125
C137
R175
R138
C178
30
31
R157
IC101
C152
C154
C176
C114
40
C173
JW262
R121
(RG490)
R055
JW207
CN001
C013
C011
JW287
R164
C146
C120
C109
C150
R158
R161
Q046
K
D011
R154
Q114
JR105
C144
R058
JW292 S G
1
R014
JW286
C164
R122
JW240
1
C023
JW257
E
Q113
C142
R101
C122
C110
E
C140
R174
C121
JW293
R013
R049
R056
R051
E
JW289
3
JW238
Q274
JW291
D003
1
C275
R011
IC021
JW285
C112
R132
R159
JW307
JR104
JW259
JR107
JW243
R202
C267
C268
JW237
C130
D002
C008
(Page 50)
CN271
R283
D001
SUB WOOFER
BOARD
CN501
C034
3
D004
R010
JW278
JW284
JW308
R201
R126
C002
R001 Q002
R130
R105 C126
C138
J
D301
JW162
R176
JW208
C001
JW313
JW241
R136
C115
JW228
CN201
JW258
(NC)
JW216
JW233
R110
R102
C015
1
R128
C069
JW329
H2
IC006
IC011
JW279
C175
R109
R114
JW234 C068
JW229
E
R124
E
R113
R111
Q111
JW227
Q112
K
C025
CN091
JW232
A
R116
G
JW341
JW288
K
JW330
1
C006
D943
A
C111
R364
R363 R366
JW215
R151
R951
JW231
R949
R943
R946
R941 C119
C118
A
JW280
JW230
JW219
R944
D921
A
R942
R108
Q903
JW217
JW246
R947
D947
A/K
R950
C921
R365
R326
3
JW164
A
D923
K
R914
CN991
C922
C033
3
JW152
JR103
R353
R119
R177
C163
K
R945
JR119
JW218
F
C007
A
JW312
R356
R349
R352
JW151
JW150
JW148
R996
R999
R997
JW146
JW147
(RG490)
C923
JW334
C902
E2
I
R903
R912
11
3
CN041
JR118
R336
Q904
JR117
JW145
R953
JW180
JR112
E
R910
JW178
D902
R901
A
E
JW177
K
1
1
JW166
D303
R320
JW176
K
R381
JW159
C333
R322
JW175
JW144
JW160
IC902
C906
JW143
H
R333
R338
R967
JW136
C920
C913
C927
C914
C909
E
D910
R907 4 3 C904 C901
D905
1
2
C908
D901
R935
Q901
JW142
E
1
CN302
R904
R902
JW168
E
R932
R982
JW141
R905 R909
C910
C919
Q902
SUPPLIED WITH THE
ASSEMBLED BLOCK
JW158
JW333
R908
C911
R911
(Page 34)
JW156
X902
JW149
R972
R973
DECK
BOARD
CN008
JW154
C916
X901
C926
R913
C117
13
C391
1
JW140
TUNER(FM/AM)
M
JW155
C903
R918
80
R936
R922
A/K
JW153
JW189
R974
D
PANEL
BOARD
CN601
R319
JW157
C918
C2
(Page 32)
R382
20
R919
JW139
DRIVER
BOARD
CN701
JW190
C917
21
(Page 30)
R383
C317
61
R070
R963
JW138
JR106
60
D2
R969
C912
IC901
(Page 54)
R965
40
JW135
R920
JW134
41
R981
C
R956
JW133
R925
JW132
BD BOARD
CN201
B
JW129
R955
R968
R980
R334
JR111
JW120
R372
R337
R332
M001
(FAN)
R335
JW130
JW131
AM
CN331
JW128
R977
R971
JW127
(Page 52)
C336
JW137
R348
CD-G BOARD
CN1001
G
FM75Ω
COAXIAL
R330
D302
JW125
JW126
R948
Note: IC901 on the MAIN board cannot exchange with single. When
IC901 is damaged, exchange the entire mounted board.
10
ANTENNA
JR113
R970
R975
R976
R342
R329
JW124
R957
R959
R347
R979
R924
R346
R341
JW123
R331
JW122
R345
R343
R921
R923
B
JW121
JW119
JW118
JW117
JW116
JW115
JW340
R344
JW336
JW337
JW316
G-9
H-9
H-9
H-8
G-9
G-9
G-9
F-9
G-2
G-2
H-3
H-4
I-7
I-7
J-9
I-8
I-8
F-9
I-5
J-9
D-3
D-2
E-3
E-3
JR116
R952
R355
Q002
Q011
Q041
Q042
Q043
Q044
Q045
Q046
Q111
Q112
Q113
Q114
Q251
Q252
Q261
Q271
Q272
Q274
Q276
Q277
Q901
Q902
Q903
Q904
JW107
JW109
R354
E-6
F-6
G-6
I-3
I-4
I-6
C-2
E-3
5
JW104
R112
IC006
IC011
IC021
IC101
IC102
IC251
IC901
IC902
4
A
JW338
F-8
F-8
F-8
F-8
G-9
H-9
E-6
H-8
G-7
H-7
G-7
G-7
G-6
G-6
G-6
G-6
J-6
J-7
G-9
C-3
C-3
D-4
E-3
E-2
E-3
D-3
F-1
F-2
G-2
F-2
3
MAIN BOARD
Ref. No. Location
D001
D002
D003
D004
D006
D007
D008
D009
D011
D012
D013
D014
D021
D022
D023
D024
D031
D035
D036
D301
D302
D303
D901
D902
D905
D910
D921
D923
D943
D947
2
: Uses unleaded solder.
(11)
HCD-RG490/RG590
7-18. SCHEMATIC DIAGRAM – MAIN Board (1/3) (RG490: MX/RG590: MX models) –
• See page 57 for Waveforms. • See page 66 for IC Pin Function Description.
(1/3)
G-5
T-DI
T-CE
T-CL
G-1
R971 100
R925
100
R980
100
D-GND
TCM-SYNC
I-MIC-DET
LM-R
C-LF
LM-F
C-TR
TM-R
C-TF
TM-F
C-E1
E-1
C-E2
E-2
C-E3
E-3
C-SE
TBL ADDRESS SENS
13
(Page
33)
D+3.3V
C-OS
OPEN SW
1
R920
470k
R952
47k
VDD(EVER)
C-LR
R955 1k
-VFL
R968 100
R977 100
R961
100
VF
TCM-SNYC
T-DO
G-3
G-2
G-6
C-6
C-3
C-5
P-DA
R921 100
R979 100
R924 100
VF
M+9V
M-GND
M-GND
R923 100
C912 0.1
CN991
19P
PM-CL
M-DA
C391
0.1
VDD(SWITCHED)
STBY-LED
STBY
KEY0
KEY0
∗R355
22k(RG490)
R346
1k
M-GND
M-GND
C-E1
R347
22k
R345
10k
C918 0.001
I-VACS
PROTECT
R922 220k
I-PROTECTOR
KEY0
O-CDG-RST/
I-RDS-CLK
O-LC23003-CE
O-VMUTE
I-CDG-DET
O-LC23003-DO
I-SUFFIX
O-LC23003-CLK
VACS
LED-GND
I-HP/
AUDIO IN
R349
10k
I-XM-RXD
I-HP-AUX
R341
10k
I-LC23003-DI
R344
22k
O-CDG-POWER
C-E2
O-CDG-MUTE-DATA/
I-RDS-DATA
VCE
R352
10k
R354
∗
O-XM-TXD
R342
1k
O-CD-DATA
R997 100
M+9V
R355
∗
R356
1M
I-CD-SENS
VCL
(RG490)
R348
22k
O-CD-CLK
VFD-CLK
R343
22k
I-MIC-DET
C-E3
VDI
O-R2S15208SP-DATA
VDO
VFD-DO
O-AUDIO-CLK
R999 100
O-R2S15207FP-DATA
VRE
VFD-DI
AVSS
R996 100
AVREF
VFD-RESET
VFD-CE
1k(RG590)
22k(RG490)
RMS
SIRCS
(Page 56)
∗R354
2.2k(RG590)
R956 100
R957 100
IXTUNED
R959 100
C-OS
R970 100
C-SE
I-OPEN-SW
I-CD-NUMBER-SENS
R913 1k
I-KEY0
O-TM-F
I-CD-ENCODER
O-TM-R
I-MODEL
O-LM-F
I-STREAM
O-LM-R
R353 10k
STREAM
R975 100
C-TF
R976 100
C-TR
R969 100
C-LF
R967 100
C-LR
SYSTEM CONTROLLER
STBY
O-STBY-LED
C-12
C-8
O-XRST
IC901
mPD7BF0547GC (S)
-UBT-A
R981 100
O-MP3-CLK
R974 100
C-11
CN091
9P
TCM-SYNC
RESET
VRE
VDD
VCE
AVREF
VDO
O-MP3-DATA
I-MP3-REQ
I-TAPE-SYNC
O-XLAT/
O-MP3-STB
R972 100
FLMD
O-VFD-CE
O-MP3-XLAT/
O-MP3-CS
O-VFD-DATA
O-MP3-RESET
C923 220p
VDI
R973 100
VCL
R982 470
C-15
R963 100
C-13
C-9
MP3-RST
FSP
O-FRONT-SP-RELAY
XT1(32.768KHZ)
O-SWR
SYS-M
R953
10k
EVDD
VDD
VSS
EVSS
O-SYS-XMUTE
REGC
X1(16MHZ)
X2(16MHZ)
O-SWR
FLMDO
XT2(32.768KHZ)
I-XRESET
I-AC-CUT
O-XM-POWER3.3
O-POWER-RELAY
O-SW_GAIN
I-AC
-PULSE
SO
O-BIAS
I-XSIRCS
-IN
O-REC-MUTE
220p
O-REC/PB
C926
RMS
SI
O-STK-MUTE
R911 1k
I-WAKEUP
SCK
C-14
C-1
O-VFD-CLK
KEY0
R965 100
O-XTCN
I-VFD-DATA
(NC)
VSS
C-10
I-MP3-ACK
O-VFD-RESET
VSS
C-4
O-D-MUTE
O-XLT
O-MP3-CS/
O-MP3-LP
I-MP3-DATA
FLMD
C-7
I-SCOR
Q903
KTA1271Y-AT
Q901
2SC3052
Q903,904
REGULATOR
RESET SWITCH
R918 220k
D910
1SS355TE-17
A1
A2
A3
Q902
2SC3052
A4
AC DETECT
A5
C913
1p
C920
1p
FLMD
C927 22p
C910 0.1
C914 22p
C919 0.1
P-RELAY
R932
2.2k
STK-M
C904
0.1
ACP
JW339
C911
0.001
O-BIAS
R935
10k
IC902
PST3429UL
REC-MUTE
GENERATOR
A6
C901
100
16V
C916
47000
5.5V
R902
0
D901
UDZW-TE17-4.7B
D923
MC2840
R948
2.2k
R944
220k
R901
100k
D902
MC2836
R914
10k
C917
0.1
R950
4.7k
D943
MC2838
R904
2.2k
X902
16MHz
RESET SIGNAL
O-R/P
(Page 43)
C902
10
50V
R949
10k
R912
1k
C903
0.47
50V
R936
22k
D921
MC2840
R946
0
B3
R951
220
R947
220k
C922
4.7
50V
B4
R945
220
VACS
D905
1SS355TE-17
X901 32.768KHz
C909
0.1
R919 0
Q904
2SC3052
R908
47k
D947
1SS355TE-17
R903
10k
C906
10
50V
R909
22k
STREAM
R905
10k
C908
0.1
PROTECT
R907
47k
C921
2.2
50V
R942
10k
R941
2.2k
(Page 42)
R943
4.7k
A7
B1
A8
R910 10k
B2
(Page 43)
(Page 42)
Note: IC901 on the MAIN board cannot exchange with single. When
IC901 is damaged, exchange the entire mounted board.
HCD-RG490/RG590
41
41
HCD-RG490/RG590
• See page 62 for IC Block Diagrams.
7-19. SCHEMATIC DIAGRAM – MAIN Board (2/3) (RG490: MX/RG590: MX models) –
(2/3)
D1
R172
0
R176
2.2k
D2
(Page 43)
R136
10k
C4
C152 0.022
C3
R128
1k
C176
1
B1
B2
(RG490)
C164
1
GND
PM-CL
CLK
C169
0.01
+9V
C165 1
O-R/P
R133
0
A-GND
C158 ∗
C122 0.047
SURROUNDR
IC101
R2S15207FP
10 50V
C160 220p
CLK
MIX2
OUTL
VCC
BB22
C110 10 50V
C157
∗
C155
∗
R177
0
C173 47p
VOLINL
TONE
OUTL
MID22
MID12
TRE2
R125
4.7k
PM-CL
BB12
BASS22
CDL
BASS12
C125 1 50V
SAOUT
R105 100
TAPEL
R121
100
RECOUTL
C114 0.1
4700p
M-DA
R143 220
R119 470
C159 220p
C267 4700p
C268
R144 220
DATA
MIX1
AUXL
R201 2.2k
R120 470
OUTR
R101 10k
C109
R140 R178
1k
0
C156 ∗
TUNERL
R202 2.2k
R134
0
C281
0.01
BB21
SURROUNDL
C115
100
16V
R142
22k
C174 47p
BB11
C121 100 16V
REC-L
REC-R
P-DA
R153
100
C177 1
VOLINR
REFIN
REC/PB SW
R152
100
(RG590)
TONE
OUTR
MID21
MID11
TRE1
BASS21
AUXR
GND
BASS11
TAPER
RECOUTR
CDR
R122 100
C120 0.1
R123
2.2k
TUNERR
O-BIAS
REC-MUTE
R151
100
ELECTRICAL VOLUME
DECK-D-GND
REC-MUTE
C171
100p
DATA
C178
1
C166
1
O-BIAS
C170
100
16V
VCC
TONE CONTROL,
CN201
11P
PB-L
C172
100p
ROUT
C154
1
50V
PB-R
REF
OUT
RIN
NC
(Page 35)
REF
IN
LIN
C144
0.047
INPUT SELECTOR,
(Page 41)
(Page 43)
IC102
R2S15208SP
C167
100
10V
LOUT
C130
1
50V
R070
10k
D3
PARAMETRIC EQUALIZER
C140
0.1
C150 0.022
R132
C126 100
1
50V
R138
2.2k
C146 4700p
R130
47k
C142 10 50V
R126
R124 4.7k
2.2k
C2
C138 1 50V
C1
C168
100
10V
∗C155-158
0.15(RG490)
C153
1
50V
0.18(RG590)
R175
2.2k
R141
22k
R139
1k
R161
22k
R163
47k
R162
22k
C175
1
R164
47k
(RG490)
C163
1
R156
220k
R155
220k
R158
220k
D-GND
O-HP/AUX
D-GND
AUX-IN-Rch
I-HP-AUX
R168 R166 R104
1k 4.7k 10k
R131
100
C139
0.1
R148 C148
47k 470p
C141
10
50V
R137 2.2k
R102
1k
R108
2.2k
R109
4.7k
R159
47k
R160
47k
C112
47
16V
(Page 45)
HP-GND
R-OUT
C068
1000p
R167 R165 R103
1k 4.7k 10k
R135
10k
R147 C147
47k 470p
C069
1000p
(Page 41)
C119
2.2
50V
R111
100k
B3
B4
Q112
2SC3052
Q111
2SC3052
C117
0.001
R116
100
R154
1M
A-GND
AUX-IN-Lch
C111
22
50V
R113
4.7k
Q113,114
BASS AGC
R145
47k
BAND-PASS FILTER
R157
220k
C151 0.022
R106 1k
C149 0.022
MIC SIG
R127
1k
C145 4700p
R068 10
Q111,112
Q114
2SC3052
Q113
2SC3052
C143 0.047
I-MIC-DET
MIC +9V
R129
47k
C116 1 50V
O-MIC-DET
R171
0
(RG590)
C129
1
50V
C137 1 50V
CN061
11P
R110
47k
R114
2.2k
C118
2.2
50V
(Page 43)
R112
470
D4
D5
HP-GND
L-OUT
EP061
C063
0.1
C064
0.001
D7
D8
D9
(CHASSIS)
D10
(Page 43)
HCD-RG490/RG590
42
42
HCD-RG490/RG590
7-20. SCHEMATIC DIAGRAM – MAIN Board (3/3) (RG490: MX/RG590: MX models) –
(3/3)
Q261
RT1P141C-TP-1
R265
100
C259
10
50V
∗R250,253
4.7k(RG490)
10k(RG590)
C263
470
16V
A1
∗R254,257
R292
2.2k
R261
10k
2.7k(RG490)
Q251
2SC3052
IC251
BA4558F-E2
4.7k(RG590)
MUTING
A4
C256
22p
A5
(Page 41)
R263
2.2k
BUFFER
A2
A3
C264
1000p
R251
470
R253
∗
A6
R291
R257
2.2k
∗
D2
R274
4.7k
Q276
2SC3052
R276
10k
R286
22k
BUFFER
Q271
2SC3052
BUFFER
C271
0.047
SW-SIG
C273
0.22
C266
4.7
50V
R277
2.2k
R287
470k
C276
0.22
C274
10
25V
R279
2.2k
R280
4.7k
SW-SIG GND
SW-ON/OFF
Q272
2SC3052
Q277
2SC3052
MUTING
C278
0.1
R272
4.7k
MUTING
LINE AMP
(Page 51)
CN271
3P
C275
470p
R281
2.2k
R250 R254 C258
∗
∗
47
16V
C253
47p
R268
4.7k
R267
47k
Q252
2SC3052
C254
47p
C255
22p
R285
10k
MUTING CONTROL SWITCH
C265
4.7
50V
R262
C260
10k
10 R252
25V 470
D1
R264
2.2k
R052
470k
R271
0
R269
2.2k
R289
100k
R290
1k
SYS-M
C257
47
16V
D3
(Page 42)
Q274
RT1N431C-TP-1
SUB WOOFER SWITCH
O-SWR
R283
10k
FSP
Q043-045
R056 10k
FAN MOTOR DRIVE
STBY RELAY
D002 10EDB40
R006
4.7k
P-RELAY
D004 10EDB40
Q002
2SC3052
RELAY DRIVE
Q042
KTA1271Y-AT
R042
10k
R043
4.7k
D001 10EDB40
Q041,042
+9V REGULATOR
C001
0.1
C011
0.1
IC011
TA7809S
+3.3V REGULATOR
D011 10EDB40
D009
MC2838
IC006
TA78033LS
R010
22k
R011
10k
C015
100
16V
G
O
PROTECT
PROTECT
D007
UDZW-TE17-4.7B
DETECT
D013 10EDB40
D014 10EDB40
I
C006
10
50V
C007
22
50V
+9V REGULATOR
R001
22
O
(Page 42)
C010
0.1
D5
C025
100
16V
R014
10k
G
R047
2.2
R046
4.7
R048
22
R061
10
C033
100
16V
R051
2.2k
Q046
2SK2158
C013
2200
25V
(FAN)
FAN+
R049
220k
FAN MOTOR DETECT
S
C034
4.7
50V
EP031
D021 10EDB40
IC021
TA7809S
R013
22k
R016
100k
R050
2.2k
R055
2.2k
D035
MC2838
D008
MC2838
Q011
RT1N141C-TP-1
G
Q045
2SC3052
M001
FAN-
R045
1k
R054
22k
D012 10EDB40
CN041
3P
FAN+
R053
22k
Q041
2SC3052
I
D006
1SS355TE-17
C035
47
25
B+ SWITCH
R057
1k
C012 0.1
O
R041
0
Q044
2SC3052
D036
MC2836
D003 10EDB40
C008
2200
25V
R039
22
1/2W
Q043
KTA1266GR
POWER ON/OFF
R005
4.7k
R038
C002
0.1
(CHASSIS)
D022 10EDB40
C023
2200
25V
I
R036
4.7k
D023 10EDB40
R035
4.7k
SP L-OUT
(RG490)
D024 10EDB40
SP-GND
R033
22k
SP R-OUT
AC3-2
C-7
SBSO
WFCK
EXCK
G-5
G-6
G-3
R335
100
G-2
G-1
AC4-2
AC4-1
T-CE
T-DI
T-CL
T-DO
C-15
C-14
C-13
C-12
C-9
C-10
C-11
R383 1k
PWR-GND
C031
0
(Page 49)
STK MUTE
C4
FM75Ω
COAXIAL
ANTENNA
HCD-RG490/RG590
43
43
R339 1k
R330 1k
SCOR
WFCK
SBSO
EXCK
CDG-BGC
CDG-DET
(Page 53)
BLOCK
AM
R340 1k
MUTE-DATA
R338 100
R334 100
R337 100
CDG-RST
R333 10k
R331 100
R332 100
R372 100
CDG-POWER
+9V
GND
GND
TUNER-L
+9V
TUNER-R
GND
N/C
PLL CE
PLL DI
PLL DO
PLL CLK
TUNER(FM/AM)
THE ASSEMBLED
D10
D8
C2
C1
CN331
13P
D031
R032
1k 1SS355TE-17
D7
SUPPLIED WITH
(Page 42)
R037
4.7k
JW032
1
CN031
13P
R063 100
C385 100p
C388 100p
(RG590)
R064 100
R363
0
C336
0.01
C3
L-OUT
GND
R364
0
M+7V
M-GND
M-GND
MP3-STB
MP3-REQ
MP3-ACK
MP3-CLK
MP3-LP
MP3-DIO
AMP-A-GND
R060
1k
2W
UNREG +16V
V-MUTE
R381 1k
R382 1k
C386 100p
C387 470p
R325 22k
R326 22k
R324 100
R316 100
R336 10k
R322 100
R323 100
R366
0
9
(Page 31)
(Page 47)
R-OUT
R329
100
C317
1000
10V
MP3-CS
D303 UDZW-TE17-4.7B
R320 100
MP3-RST
SCOR
CD-SENS
CD-CLK
XLT
CD-DATA
AVDD(3.3V)
XTCN
XRST
R-CH
D-GND
A-GND
L-CH
D-GND
WFCK
CN302
31P
SBSO
(RG590)
EXCK
ACP
-VFL
D-OUT
STBY RELAY
DVDD(3.3V)
EVER +10V
ACP
MP3-RST
C-7
C-6
C-5
C-3
C-4
C-8
C-1
R318 100
D-GND
MP3(3.3V)
AC4-2
VF
C333 0.1
AC4
R365
0
MP3-GND
AC4-1
R321 100
AC4
PROTECT
R059
1k
2W
-VFL
D301
10EDB40
R317 100
AC3-2
VF
(Page 61)
SP RELAY B+
PROTECT
STK-M
AC3-1
AC3
STBY RELAY
D302
10EDB40
R034
22k
C027
0.01
R319 100
(Page 59)
CN001
11P C026
0.01
AC3
R315 100
(RG490)
SBSO
A8
WFCK
EXCK
(Page 41)
A7
AC3-1
D4
D9
(Page 42)
HCD-RG490/RG590
• See page 27 for Circuit Boards Location.
7-21. PRINTED WIRING BOARD – MIC. AUX. HP Board –
1
2
3
: Uses unleaded solder.
4
5
6
7
(Page 36)
EXCEPT
RG490: MX/
RG590: MX
RG490: MX/
RG590: MX
MIC. AUX. HP BOARD
R859
C867
R858
R857
C868
C865
R815
R816
R856
R813
C816
C815
JW811
JW804
C801
R809
C807
R808
C808
C810
R811
C784
C802
R810
R812
R803
R860
C803
C809
C811
R819
R862
JW807
C869
C805
1
R804
RG490: MX/
RG590: MX
R802
R807
R801
Q801
R806
R855
JW809
R820
E
C863
C
JW813
JW802
C859
JW808
R854
R861
C864
EP701
13
IC801
D851
IC802
C856
C861
C813
R817
C870
R818
C818
JW805
B
JW810
JW801
R821
R823
VR801
MIC
LEVEL
C782
JW812
R805
VR851
ECHO
LEVEL C862
RG490: MX/
RG590: MX
C817
C852
JW806
C853
R814
C814
C851
C854
MAIN
BOARD
CN061
(EXCEPT RG490: E3/RG590: UK, E3)
R851
R852
R853
C857
F2
(CHASSIS)
(RG490: MX/RG590: MX)
C858
F1
(Page 40)
MAIN
BOARD
CN061
C819
A
8
R825
C821
JW803
C820
RG490: E3/
RG590: UK, E3
C781
C783
R831
R826
JR801
R832
R827
R824
JR802
EP801
RG490: E2, E51/
RG590: E2, E51, AR
C833
EXCEPT RG490: MX/
RG590: MX
D
11
12
(11)
(12)
1-868-902- 1-869-004(CHASSIS)
RG490: MX/
RG590: MX
JK802
RG490: E2, E51/
RG590: E2, E51, AR
MIC
JK801
MIC 1
MIC 2
(RG490: MX/RG590: MX)
HCD-RG490/RG590
44
44
J702
AUDIO IN
J701
PHONES
HCD-RG490/RG590
7-22. SCHEMATIC DIAGRAM – MIC. AUX. HP Board –
• See page 62 for IC Block Diagrams.
RG490:E2,E51/
RG590:E2,E51,AR
(RG490:MX/RG590:MX)
R862
470
JR801 0
JK801
R801
4.7k
JR802
0
MIC 1
RG490:MX/
R802
0
RG590:MX
R805
100k
EXCEPT
RG490:E3/
RG590:MX
C803
0.022
R804
0
R861
470
RG490:MX/
C805
0.022
IC801(1/2)
BA4558F-E2
C808
220p
3
1
RG590:UK,E3
MIC AMP
2
4
R803
4.7k
JK802
R807
10k
R806
100k
MIC
RG490:E2,E51/
RG590:E2,E51,AR
C801
10
16V
Q801
C802
2SC3052 1000p
C807
1000p
R819
470k
R808
10k
IC802
M65850FP
C811
0.1
50V
R809
100k
R810
1k
R817
4.7k
C813
100
16V
C851
R851
1
50V 22k
R812
100
C818
10
16V
C854
0.022
8
7
R815
100
IC801(2/2)
BA4558F-E2
EP801
C814
2.2
50V
R814
220k
C833
0.1
C816
220p
(CHASSIS)
REF
C863
R856 2.2
10k 50V
R813
10k
C870
47
16V
C868
0.022
C867
0.047
OP2IN
R859 22k
CC1
C864
1000p
CC2
C858
0.47 50V
R820
22k
R827
10k
C869 47 16V
OP1OUT
OP2OUT
R816 100k
6
R860
100k
LPF1OUT
CLOCK
OP1IN
C857
0.47 50V
C819 0.1
5
VCC
C853
0.047
C817
2.2
50V
NC
LPF1IN
R853
22k
MIC LEVEL
R818 4.7k
C815
47p
D851
UDZW-TE17-5.1B
NC
R852 C852
22k 1000p
VR801
50KA
C809
10
16V
MIC 2
RG590:MX
DIGITAL ECHO
C810
470p
MUTING
RG490:MX/
R811
47k
R858 22k
VR851
50K
LPF2IN
R857 22k
GND
LPF2OUT
C856
4700p
ECHO LEVEL
C859
0.1
R854
47k
C861
1
50V
R855
22k
C865
4700p
C862
0.047
R821
10k
R823
2.2k
13
O-MIC-DET
EXCEPT
RG490:MX/
MIC +9V
RG590:MX
MIC SIG
D-GND
R825
1k
J702
AUDIO IN
C820
1000p
C821
1000p
R832 R831
470k 470k
R826
1k
O-HP/AUX
D-GND
R824
22k
(Page 38)
AUX-IN-RCH
A-GND
(RG490:E3/RG590:UK,E3)
AUX-IN-LCH
HP-GND
(Page 42)
R-OUT
J701
PHONES
HP-GND
C783 C784
0.1
0.1
C781
∗
L-OUT
C782
∗
RG590:MX
1
∗C781,782
EP701
(CHASSIS)
RG490:MX/
1000p(EXCEPT RG490:E3/RG590:UK,E3)
2200p(RG490:E3/RG590UK,E3)
HCD-RG490/RG590
45
45
HCD-RG490/RG590
• See page 27 for Circuit Boards Location.
7-23. PRINTED WIRING BOARD – POWER Board (RG490) –
1
A
2
3
4
5
: Uses unleaded solder.
6
7
8
9
10
11
12
• Semiconductor
Location
M1
TRANSFORMER
BOARD
CN903
13
(Page 58)
Ref. No. Location
1
C403
F-7
F-6
D-4
D-4
D-3
E-2
E-3
E-2
E-3
F-2
G-3
C405
JW431
D401
J1
C406
(Page 50)
JW427
L1
D
(EXCEPT MX)
C404
Q441
Q442
Q481
Q482
Q483
Q484
Q485
Q486
Q487
Q488
Q489
R401
G-5
JW428
SUB WOOFER
BOARD
CN502
POWER BOARD
(Page 36)
4
CN441
J3
MAIN
BOARD
CN031
JW422
E
E
E
Q482
Q481
Q483
(Page 40)
CN443
R486
E
MAIN
BOARD
CN031
JW426
C481
Q484
R485
6
R465
(MX)
1
JW411
R458
JW418
-1
JW417
C441
R441
R447
R445
C451
C454
R425
R421
C448
R453
R423
C442
-2
R424
R454
JW416
JW405
R495
R452
C411
R420
R422
C453
R461
L441
R443
R448
C443
R434
C445
C446
R446
R435
C444
JW402
JW423
JW424
JW401
JW425
R451
R491
C447
JW442
EP401
R413
R411
R414
R462
R442
R412
R415
TH441
E
RY441
JW443
A
JW467
Q489
K
D441
JW433
JW403
C488
JW459
D481
R449
R493
JW461
JW444
C489 R460
K
D483
C452
JW451
R459
Q488
R492
G
Q442
JW462
JW452
JW445
R457
R444
C490
Q441
R455
E
JW448
JW404
R496
JW463
JW449
R456
E
JW450
E
Q485
R440
JW406
R490
JW456
JW460
JW408
R487
JW464
JW453
JW409
E
R499
JW455
JW454
JW421
JW420
JW419
JW415
R498
R482
R488
Q487
JW407
JW410
R481
E
Q486
JW414
E
JW412
R497
C486
JW413
R484
E
R480
R466
R483
F
3
R402
IC441
CN442
1
JW430
C
C-10
F-7
G-12
F-7
F-2
JW434
B
D401
D441
D443
D481
D483
JW447
IC441
R416
L442
(CHASSIS)
D443
JW457
R418
R419
R417
R407
12
1-869-308-
H
–
+
R
SPEAKER
JK441
HCD-RG490/RG590
46
46
–
+
L
(12)
HCD-RG490/RG590
7-24. SCHEMATIC DIAGRAM – POWER Board (RG490) –
R447 47k
C441
10
50V
JW401
R441
2.2k
L441
4
IC441(1/2)
STK403-130
R434
0
C445
100p
10
C453
0.1
STANDBY
SWITCH
C448
22
35V
R493
47k
C488
22
35V
Q481
2SC3052
Q482
2SC3052
R457
22k
R459
47k
D481
1SS355
R425
10
R453
10
R480
100k
R484
100k
R485
100k
Q483
2SC3052
R414 10
R416 10
R415 10
RY441
D443
1SS355
R424
10
R420
10
SP GND
Q484
2SC3052
C481
100
10V
R417
100
R418
100
R407
100
R419
100
L
TH441
R486
100k
SP(L)
JK441
SPEAKER
SP GND
R460
47k
C490
100
63V
D441
MC2836
Q442
2SC5625
R
R423
10
R421
10
R495
1
R422
10
R454
10
Q485
2SA1235
PROTECTOR
R458
22k
SP(R)
C411
0.01
R444
47k
R446
1k
R462 10
R483
22
Q441
2SC5625
C489
47
63V
R412 10
Q483,484
R492
1k
Q489
2SC5625
C447
22
35V
R465
47k
TEMPERATURE DETECT
C451
0.1
R455
1k
R443
47k
R466
100k
DC DETECT
R491
10k
D483
1SS355
R497
100k
Q481,482
R451
0.22
5W
POWER AMP
C443
0.001
R411 10
R413 10
L442
-2
R445
1k
R461 10
-1
R482
10k
C486
2.2
50V
(CHASSIS)
EP401
R448 47k
C444
0.001
R456
1k
C454
0.1
Q441,442
R481
4.7k
CN441
13P
OVER LOAD
9
DETECT
C452
0.1
14
SP L-OUT
R487
47k
6
2
15
R442
2.2k
Q486,488
3
R452
0.22
5W
1
8
RELAY DRIVE
R440 22k
R499
1k
R488
Q486
22k 2SC3052EF
R496
100
4
C405
2200
63V
R401
100k
3
C403
0.1
100V
Q488
2SC2411K
SP-GND
SP R-OUT
SP RELAY B+
D401
GBJ10-D89
(Page 39)
PROTECT
R490
4.7k
JW402
C442
10
50V
1
DETECT
R498
1k
7
IC441(2/2)
STK403-130
R435
0
(EXCEPT MX)
2
Q487
2SC3052
PROTECT
C446
100p
R-OUT
C406
2200
63V
R402
100k
C404
0.1
100V
AMP-A-GND
L-OUT
UNREG +16V
PWR-GND
R449
47 1/2W
(Page 43)
STK-MUTE
-VFL
GND
CN443
6P
CN442
3P
AC1
+VCC
NC
NC
GND
GND
-VCC
AC1
(Page 59)
OVERLOAD/DC DETECT
(Page 51)
(MX)
RELAY+
RELAY-
HCD-RG490/RG590
47
47
HCD-RG490/RG590
• See page 27 for Circuit Boards Location.
7-25. PRINTED WIRING BOARD – POWER Board (RG590) –
1
A
2
3
4
5
: Uses unleaded solder.
6
7
8
9
10
11
12
• Semiconductor
Location
M2
TRANSFORMER
BOARD
CN905
13
(Page 60)
Ref. No. Location
C
D
I-5
Q441
Q442
Q481
Q482
Q483
Q484
Q485
Q486
Q487
Q488
Q489
Q490
Q491
G-7
G-6
F-2
F-3
G-1
H-1
G-5
F-6
F-5
F-7
G-2
G-1
G-2
5
(CHASSIS)
JW402
JW401
C413
C414
C403
C404
JW408
R404
IC441
CN442
1
R406
C-8
C-11
G-7
I-12
F-3
H-4
I-4
G-7
R402
B
D401
D402
D441
D443
D444
D445
D446
D481
1
1
R401
4
4
D401
R409
D402
R410
JW410
JW409
R403
R405
C406
C405
EP402
C402
(Page 50)
L2
JW443
JW444
JW416
JW446
JW447
JW452
C481
E
JW458
R479
D446
C442
JW424
JW426
JW428
JW429
JW435
JW436
JW460
JW461
R491
JW437
-1
C451
R422
R454
JW432
C411
C491
-2
C453
R421
R448
R413
L441
R425
R420
R453
JW434
R446
18
R461
R412
R424
EP401
(R590: UK)
R494
R411
R423
R476
C444
1
C448
R436
R439
C445
C441
JW441
R445
R447
C446
IC441
D445
C454
JW440
C447
C452
RY441
A
R414
R442
R444
JW467
C443
JW421
JW423
JW431
JW433
JW465
D441
R493
TH441
JW459
JW464
R460
JW422
JW430
JW439
R459
K
JW419
JW420
JW438
R443
R468
JW425
D481
K
E
R441
JW468
H
1
R492
JW404
R450
JW403
R449
R495
JW482
R467
E
JW463
JW484
JW485
JW406
JW481
R483
6
Q441
R458
Q442
JW483
E
R474
R496
E
JW405
R482
R456
R473
R484
E
R463
R480
Q484
R455
R478
Q483
CN443
Q488
E
R457
JW470
R481
C461
Q485
R490
Q486
JW462
Q489
Q490
C486
R487
JW469
R477
E
E
JW466
E
E
R485
Q487
R488
JW477
JW479
JW474
JW476
R464
R471
R472
R470
Q491
(MX)
R440
R499
R498
JW478
R469
D444
C462
(Page 40)
JW418
JW456
JW457
JW473
C463
G
JW417
JW453
JW472
JW480
R486
JW450
JW454
JW471
R497
R475
MAIN
BOARD
CN031
C409
JW451
R466
Q482
Q481
J4
JW445
JW455
JW475
E
F
R465
(Page 36)
CN441
JW448
JW449
POWER BOARD
J2
MAIN
BOARD
CN031
JW442
JW414
E
(EXCEPT MX)
JW415
SUB WOOFER
BOARD
CN502
C410
R462
JW486
R415
(UK)
L442
C460
C459
R416
R417
R407
R418
R419
D443
I
11
1-868-911(CHASSIS)
J
–
+
R
SPEAKER
JK441
HCD-RG490/RG590
48
48
–
+
L
(11)
HCD-RG490/RG590
7-26. SCHEMATIC DIAGRAM – POWER Board (RG590) –
C461
47
100V
R467
2.2k
1W
R496
100
D445 UDZW-TE17-16B
R441
2.2k
+PRE
+
+VH
NF/CH1
+REF
+VL
-REF/CH1
+RE/CH1
L441
R493 C445
100p
0
IN/CH1
-1
-
JW403
-PRE
R449
0.22
5W
IC441(1/2)
STK412-240
R497
100k
Q481,482
R464
100k
R445
1k
R491
47k
Q491
2SA2026
R455
1k
R470
47k
C453
0.1
R462 10
R414 10
R416 10
R415 10
Q483,484
Q481
2SC3052
Q482
2SC3052
R412 10
R480
100k
R484
100k
Q483
2SC3052
R485
100k
RY441
D443
1SS355
Q489
2SC5625
D444
1SS355
(UK)
R443
47k
R469
47k
Q489-491
R473
47k
Q441
2SC5625
R459
100k
R463
47k
C462
47
100V
R495
1
R436
22k
R476
22k
R439
10k
R479
10k
D481
1SS355
R453
10
SP GND
Q484
2SC3052
C481
100
10V
R420
10
R424
10
R417
100
R418
100
R407
100
R419
100
L
TH441
R486
100k
SP(L)
JK441
C459
1000p 100V
R460
100k
R475
10k
R468
2.2k
1W
∗C411
Q442
2SC5625
R423
10
R421
10
R422
10
R454
10
1000p
0.01
Q490
2SC3052
D446
UDZW-TE17-16B
R477
100
R425
10
D441
MC2836
STANDBY SWITCH
R444
47k
R483
22
R457
22k
R471
100k
C463
470
6.3V
C491
0.1
C448
47
50V
R446
1k
R472
100k
R474
2.2k
C447
47
50V
C443
0.001
R465
47k
TEMPERATURE DETECT
C451
0.1
C441
10
50V
R466
100k
DC DETECT
R447
47k
R411 10
R413 10
L442
-2
POWER AMP
R461 10
R492
47k
Q485
2SA1235
PROTECTOR
R458
22k
R482
10k
C460
1000p 100V
C411
∗
(EXCEPT UK)
(UK)
SPEAKER
SP GND
R
(UK)
SP(R)
C486
2.2
50V
(CHASSIS)
EP401
R448 47k
C454
0.1
Q441,442
R481
4.7k
CN441
13P
OVER LOAD
R478
10k
SUB
R494
0
-VH
-REF
-VL
C444
0.001
C446
100p
C452
0.1
SP L-OUT
R487
47k
Q487
2SC3052
R456
1k
BIAS
NF/CH2
DETECT
R440 22k
R405
100k
R499
1k
-RE/CH2
R442
2.2k
Q486,488
IC441(2/2)
STK412-240
R450
0.22 5W
RELAY DRIVE
R488
22k
R490
4.7k
Q486
2SC3052
C405
2200
71V
R401
100k
3
SP-GND
C403
0.1
100V
4
DETECT
R498
1k
IN/CH2
+
1
PROTECT
JW404
+RE/CH2
(EXCEPT MX)
2
R403
100k
SP R-OUT
SP RELAY B+
D401
GBJ10DB9
(Page 39)
PROTECT
R-OUT
Q488
2SC2411K
C406
2200
71V
C442
10
50V
AMP-A-GND
C404
0.1
100V
R402
100k
L-OUT
UNREG +16V
(Page 43)
PWR-GND
R406
100k
STK MUTE
R404
100k
-VFL
GND
CN442
5P
CN443
6P
+VCC
C410
3300
50V
NC
AC-VH
R410
100k
AC-VL
GND
2
-VCC
1
OVERLOAD/DC DETECT
(Page 51)
(MX)
C409
3300
50V
RELAY+
4
D402
GBJ10DB9
C414 0.1
GND
C413 0.1
AC-VL
AC-VH
R409
100k
(Page 61)
3
RELAYC402
0.01
HCD-RG490/RG590
49
49
EP402
(CHASSIS)
HCD-RG490/RG590
• See page 27 for Circuit Boards Location.
7-27. PRINTED WIRING BOARDS – SUB WOOFER Section –
1
2
3
4
(RG490)
L1
SUB WOOFER BOARD
5
6
7
8
9
(Page 48)
POWER
BOARD
CN443
L2
SW-SP BOARD
POWER
BOARD
CN443
CN504
EXCEPT
RG490: MX/
RG590: MX
4
CN502
(Page 36)
CN501
1
R523
R521
JW514
R505
Q502
R508
JW522
RY501
R525
R526
C509
C506
JW506
JW505
C507
R527
Q506
E
R511
D503
R514
R507
R502
C505
C503
R501
1
CN503
4
(12)
12
1-868-920-
(12)
E
R503
JR501
C512
12
R513
D501
R524
R529
JW504
C504
-2
1-868-919-
D502
C514
R510
C516
JW503
E
-1
JW509
R504
Q505
–
C513
JW501
D507
JK501
SUB WOOFER OUT
R512
JW521
R531
D
+
3
R506
C
R509
JW516
JW507
JR502
(Page 40)
RG490: MX/
RG590: MX
1
D504
E
E
H2
MAIN
BOARD
CN271
R534
R516
C517
R517
C510
Q503
R532
R533
JW502
MAIN
BOARD
CN271
R518
C511
R520
R522
H1
B
10
(RG590)
(Page 46)
A
: Uses unleaded solder.
Q501
R515
C508
C502
E
Q507
R530
IC501
• Semiconductor
Location
Ref. No. Location
HCD-RG490/RG590
50
50
D501
D502
D503
D504
D507
C-4
C-6
C-6
B-7
C-2
IC501
D-4
Q501
Q502
Q503
Q505
Q506
Q507
D-6
B-6
B-3
C-2
C-3
D-3
HCD-RG490/RG590
7-28. SCHEMATIC DIAGRAM – SUB WOOFER Section –
POWER AMP
IC501
STK404-130
1
2
3
4
5
6
7
8
9
10
11
12
13
Q507
2SC3052
TEMPERATURE
DETECT
R506
1
R530
22k
R507
4.7k
1W
R511
0.22
5W
C508
220p
JW521
C516
10
50V
JR501
0
C505
10p
C502
220p
EXCEPT RG490:MX/
R510
0.22
5W
R508
4.7k
1W
C507
47
50V
R513
1k
R509
100
RG590:MX
Q501
2SC5625
C513
0.1
R531
4.7k
RG490:MX/
D507
1SS355
1SS355
100V
10
R517
10k
R527
10
R526
10
R515
47k
D503
1SS355
D502
C511
100V
R525
10
R518
10k
DETECT
C512
0.1
R512
10
10
25V
UDZW-TE17-12B
100
C506
SW-ON/OFF
(Page 43)
R505
∗
D501
C509
SW-SIG GND
100V
C504
22
25V
100
R502
47k
SW-SIG
R514
22k
C510
47k
0.0047
R501
2.2k
CN501
3P
R529
(Page 39)
C503
OVER LOAD
R504
47k
R503
1k
Q502
2SA1235
R534
1
RELAY
DRIVE
RG590:MX
(RG490)
4.7k 2W(RG590)
GND
-VCC
OVERLOAD/DC DETECT
(Page 47)
RELAY+
R523
100
R522
100
R521
100
R516
100
RELAY-
Q505,506
(Page 49)
Q506
2SC3052
Q505
2SC3052
R524
47k
R532
22k
R520
100k
DC DETECT
Q503
2SC3052
TEMPERATURE
(RG590)
DETECT
C514
100
35V
-1
RY501
CN503
4P
CN504
4P
SUB WOOFER OUT
4.7k 1W(RG490)
+VCC
-2
JK501
∗R505
CN502
6P
D504
1SS355
C517
10
50V
R533
22k
HCD-RG490/RG590
51
51
HCD-RG490/RG590
• See page 27 for Circuit Boards Location.
7-29. PRINTED WIRING BOARDS – CD-G Section (RG490: MX/RG590: MX models) –
1
2
3
4
5
: Uses unleaded solder.
6
7
8
9
10
11
CD-G BOARD (SIDE B)
CD-G BOARD (SIDE A)
A
IC1003
L1001
3
C1010
Q1008
2
C1008
E
1
R1033
R1032
L1002
R1034
R1035
C1012
B
13
E
Q1007
C1028
5
1
22
26
IC1002
14
C1002
E
R1022
MAIN
BOARD
CN331
E
E
(Page 40)
E
E
C1015
C1016
C1022
R1037
R1017
R1020
R1011
C1003
R1012
R1003
R1015
C1005
C1006
C1019
7
Q1005
C1018
D
1
60
R1036
46
R1023
1
Q1009
45
R1016
R1004
X1002
C1007
C1004
R1029
8
R1013
IC1005
R1005
Q1001
14
CN1001
Q1006
C1001
R1006
G
Q1002
IC1001
R1021
15
R1051
R1038
31
C1013
18
16
C1011
30
C
9
C1014
VIDEO OUT BOARD
CN803
R1031
FB1001
C1030
C1023
IC1006
1
C803
C1027 C1029
R1030
C1031
CN1004
E
JR1001
Q1010
C1024
3
6
VIDEO OUT
1
C1026
C1025
E
4
J803
2
(RG590)
11
11
1-865-725-
(11)
1-865-725-
(11)
(RG490)
11
12
(11)
(12)
1-868-912- 1-869-309-
• Semiconductor
Location
Ref. No. Location
HCD-RG490/RG590
52
52
IC1001
IC1002
IC1003
IC1005
IC1006
C-2
B-7
A-3
C-4
E-2
Q1001
Q1002
Q1005
Q1006
Q1007
Q1008
Q1009
Q1010
C-7
C-6
D-6
C-6
B-3
A-4
D-6
E-7
HCD-RG490/RG590
• See page 57 for Waveforms.
7-30. SCHEMATIC DIAGRAM – CD-G Section (RG490: MX/RG590: MX models) –
• See page 62 for IC Block Diagrams.
• See page 66 for IC Pin Function Description.
SCOR
3A
GND
4Y
2Y
5A
3Y
2A
6Y
4A
1Y
6A
5Y
1A
VCC
R1036 0.0047
R1037 0.0022
WFCK
SCHMITT
TRIGGER
IC1005
SN74AHCT04NSR
R1038
470P
SBSO
EXCK
C1011
0.01
CN1001
13P
D-RAM
LEVEL SHIFT
IC1002
MSM514400E-60TS
L1002
10
A4
VCC
A4
A5
A5
A6
A3
A2
MUTE-DATA
CDG/_BGC
CDG/BGC
A6
Q1005
RT1N441C-TP-1
_RST
CDG-RST
(Page 43)
R1023 220
Q1005,1009
EXCK
EXCK
R1022 220
SBSO
SBSO
R1020
10k
R1021 220
R1003
4.7k
R1004 2.2k
Q1009
RT1P141C-TP-1
WFCK
WFCK
C1001 0.01
SCOR
SCOR
A7
A1
A7
Q1002
RT1N441C-TP-1
A0
A8
CDG-DET
CDG-DET
CDG-POWER
CDG-POWER
VMUTE
C1012
47
6.3V
_RST
V-MUTE
C1014
0.01
OE
A9
GND
C1019 22p
Q1002,1006
R1015 100
RAS
VA0
XWE
XRAS
MCDI
MCCK
MCDO
MCE
VSS1
VDD1
SFSY
SBSY
MUTE
X1002
14.31818MHz
DATA
+9V
CLCK
SESUB
OE
GND
CAS
DQ3
VA1
XI1
VA2
XO2
VA3
XI2
VA4
PDOWN
VA5
SENTSC
VA6
DQ4
DQ2
DQ4
C1018 22p
LEVEL SHIFT
DQ3
WE
XO1
DQ1
VSS
C1016 0
A4
A5
A6
CD GRAPHICS DECODER
XRESET
R1017 10k
Q1006
RT1P141C-TP-1
A7
VA7
IC1001
TC9411AFG
C1015 0.01
FSC
VSS2
DEN
Q1001
RT1N441C-TP-1
CDG/_BGC
R1016
10k
VDD2
PNG
VD0
QNG
XCAS
Q1001
NTSC/PAL
VDD3
VD1
VSS3
XOE
BIAS2
VD2
C1003 0.01
OE
SELECT SWITCH
C1005 0.01
DQ3
C1006 0.01
Q1010
RT1N441C-TP-1
BLNKIN
BIN
GIN
RIN
XHSYNC
XVSYNC
GDET
VON
TEST1
TEST2
LINESW
VREF
VD3
C1002
0.01
C1028
100
6.3V
VIDEO AMP
IC1006
NJM2561F
VOUT
SAVE
_PWR
C1026
1000
6.3V
C1023
1
50V
VIN
GND
C1004
0.01
VCC
C1031
1
50V
C1022
22p
C1025
0.01
R1032
10k
R1035
2.2k
R1034
2.2k
R1029
1k
R1030
22k
R1031
75
L1001
0
R1013 R1012
2.2k
10k
C1013
100 6.3V
Q1007,1008
C1007 0.01
VSAG
C1030
22
6.3V
R1011 4.7k
VIDEO MUTING
FB1001
0
AVDD
AVSS
VMUTE
VDOUT
DQ4
BIAS1
R1033
2.2k
R1005
2.2k
B+ SWITCH
+5V REGULATOR
C1010
100
6.3V
IC1003
µPC2905
O
R1006
4.7k
G
Q1008
2SB1122
Q1007
RT1N441C-TP-1
I
C1008
1
50V
JR1001
0
J803
C1029
0.001
C1024
100
6.3V
CDG-DET
R1051
10
C1027
220p
CN1004
3P
GND
CN803
2P
VIDEO OUT
VIDEO
GND
CDG-POWER
GND
HCD-RG490/RG590
53
53
C803
0.1
VIDEO OUT
HCD-RG490/RG590
• See page 27 for Circuit Boards Location.
7-31. PRINTED WIRING BOARD – PANEL Board –
1
• Semiconductor
Location
2
Ref. No. Location
7
8
9
PANEL BOARD
C622
CN604
1
1
2
41
5
44
45
R744
Q
R743
JW635
JW633
JW628
JW681
JW679
JW678
JW677
JW674
JW675
JW676
C710
60
JW663
R607
JW629
JW632
C703
R703
R628
JW661
R705
R706
R613
R707
Q603
JW619
X701
R701
C701
80
41
1
40
JR610
R704
JW662
R603
E
JW631
1
JW630
R633
S613
61
IC701
JW625
N
JW624
JW621
R618
JW623
R617
5
JW665
C702
R608
JW627
1 C631
(Page 55)
KEY TOP
BOARD
CN607
C711
JW664
CN606
C705
JR614
R610
C704
R708
R702
Q604
D601 – 605
(STREAM)
JW615
R647
D604
JW657
D602
S623
x
R766
R711
JW658
E
R718
JW659
R719
R670
C708
R765
JW616
R713
R764
E
R671
R717
R663
21
C709
R712
R690
R691
20
C707
R710
(EXCEPT RG490/RG590: UK)
JR609
R716
R634
JW617
JR613
R715
R661
JW618
R763
D603
R762
R681
R709
(EXCEPT RG490/RG590: UK)
R680
u
R660
D
JW673
JW671
JW670
C
3
EXCEPT RG490/
RG590: UK
R746
C712
JW672
R627
JW669
JW666
5
JW668
JW634
4
IC610
C621
JR612
JW680
5
(Page 55)
JW667
B
R745
FL701
FLUORESCENT INDICATOR TUBE
KEY RIGHT
BOARD
CN605
B-1
D-8
G-6
F-7
D-4
E-3
H-5
F-3
F-3
H-5
H-6
G-3
H-7
G-8
6
A
JW626
Q601
Q602
Q603
Q604
Q605
Q621
Q701
Q702
Q703
Q704
Q705
Q706
5
JW622
IC610
IC701
H-6
F-7
D-5
F-4
H-4
H-6
4
JW620
D601
D602
D603
D604
D605
D711
3
: Uses unleaded solder.
JW614
JW654
JR608
JW660
JR605
E
R672
JW651
JW652
R632
C641
JW602
Q601
R631
JR603
R773
E
D601
E
K
Q702
CN601
Q703
R742
R741
JW611
K
D711
R775
R774
E
Q705
–
JW637
TAPE MECHANISM
DECK BLOCK
S611 – 613, 621 – 623
E1
EXCEPT RG490: MX/
RG590: MX
(Page 36)
E2
MAIN
BOARD
CN991
(Page 40)
RG490: MX/
RG590: MX
HCD-RG490/RG590
54
JW650
JW648
JW649
JW644
JW647
S621
m
A
H
MAIN
BOARD
CN991
JW638
KEY LEFT
BOARD
CN609
(EXCEPT RG490/RG590: UK)
CN603
(RG490/RG590: UK)
(Page 55)
1
JW636
R635
11
E
E
Q605
P
(RG490/RG590: UK)
R776
JW612
JW601
JR611
CN602
6
R601
E
Q704
D605
R629
R611
JW613
R605
R615
JW610
JW609
+
JW685
R772
S611
M
JW642
JW603
C625
JW641
JW639
JR602
JW646
1
JW643
3
JW608
JW604
JW606
JW605
JW645
R602
JW607
R673
(EXCEPT RG490/RG590: UK) CN608
1
Q706
C642
R771
R612
R609
R650
S622
l
TUNING
–
R674
Q701
R651
G
JR606
JW653
Q602
E
JW640
F
R604
Q621
S612
L
TUNING
+
R614
E
R662
JW655 JR604
JR607
JW656
S671
ROTARY ENCODER
VOLUME
54
SUPPLIED WITH THE
ASSEMBLED BLOCK
11
12
(11)
(12)
1-868-903- 1-869-005RG490: MX/
RG590: MX
EXCEPT RG490: MX/
RG590: MX
HCD-RG490/RG590
• See page 27 for Circuit Boards Location.
7-32. PRINTED WIRING BOARDS – KEY Section –
1
2
3
4
5
6
: Uses unleaded solder.
7
8
9
10
(EXCEPT RG490/RG590: UK)
A
PANEL BOARD
CN606
N
(Page 54)
KEY TOP BOARD
CN607
R692
S641
5
R693
R664
VOCAL
BASS
1
GUITAR
S643
S642
JW684
S618
R694
S648
B
R668
R659
R658
D623, S618
R667
R665
R666
–
R695
S617
S616
S615
S614
S644
EQ BAND
SURROUND
GROOVE
CLEAR
ENTER
SUB WOOFER
<
D623
R698
S645
S647
,
R697
R696
S646
C
+
(MX)
(EXCEPT MX)
11
12
(11)
(12)
1-868-906- 1-869-008-
KEY LEFT BOARD
KEY RIGHT BOARD
D
S601 – 606,
S614 – 618,
S624 – 628,
S631 – 638,
S641 – 648
D611
STANDBY
1
S638
S601
R626
R652
R688
S637
E
S606
CD
JW682
F
R656
S636
TUNER/BAND
DISC 3
EXCEPT RG490/
RG590: UK
S605
CN609
1
DISC 2
R687
JW683
R686
R675
P
R655
PANEL
BOARD
CN608
TAPE A/B
6
CN603
S635
EXCEPT RG490/
RG590: UK
CN602
(RG490/RG590: UK)
(RG490/RG590: UK)
S604
G
DISC 1
(Page 54)
DISC SKIP/
EX-CHANGE
R685
CN605
R654
H
1
R639
R653
Q
DISC A
R640
S603
S634
AUDIO IN
(RG490/RG590: UK)
D622
R684
5
PANEL
BOARD
CN604
(Page 54)
SURROUND
(RG490/RG590: UK)
PLAY MODE/
TUNING MODE
D622, S628
I
SUB WOOFER
S633
R683
S632
S628
EXCEPT RG490/
RG590: UK
C643
(RG490/RG590: UK)
1
3
GROOVE
EXCEPT RG490: MX/
RG590: MX
C644
REPEAT
DISPLAY
J
EXCEPT RG490/
RG590: UK
KARAOKE
(RG490: MX/RG590: MX)
EQ BAND
S602
S625
R676
(RG490/RG590: UK)
SLEEP
EXCEPT RG490/
RG590: UK
S672
ROTARY ENCODER
(MULTI JOG)
ILLUMINATION
ENTER
CD SYNC
R677
S626
S631
R682
K
R678
S624
(RG490/RG590: UK)
REC/PAUSE
START
S627
11
12
11
12
(11)
(12)
(11)
(12)
1-868-904 1-869-006RG490: MX/
RG590: MX
1-868-905- 1-869-007-
EXCEPT RG490: MX/
RG590: MX
RG490: MX/
RG590: MX
HCD-RG490/RG590
55
55
EXCEPT RG490: MX/
RG590: MX
HCD-RG490/RG590
• See page 57 for Waveforms. • See page 66 for IC Pin Function Description.
7-33. SCHEMATIC DIAGRAM – PANEL/KEY Section –
R664
4.7k
R666
10k
R667
22k
R668
47k
S614
S615
S616
S617
S618
CLEAR
GROOVE
SURROUND
EQ BAND
SUBWOOFER
R692
2.2k
R693
2.2k
R694
4.7k
R695
4.7k
R696
10k
R697
22k
R698
47k
S641
S642
S643
S644
S645
S646
S647
BASS
VOCAL
GUITER
ENTER
R665
4.7k
FL701
SUBWOOFER
GND
SW LED
KEY4
LED+9V
G12
S648
R659
1k
G13
G10
G11
G9
G8
G7
G6
G4
G5
G3
G2
G1
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
S12
S11
S13
S14
S15
S16
S17
S18
S19
S20
S21
R658
1k
KEY1 OUT
NX
D623
SLR325MC
F2
NP
NP
G13
G12
G11
G10
G9
G7
G8
G6
G5
G4
G3
G2
NC
NC
G1
S1
S2
S3
S4
S5
S6
S8
S7
S9
S10
S11
S12
S13
S14
S16
S15
S17
S18
S19
NC
S20
S21
NX
NP
F1
NP
FLUORESCENT INDICATOR TUBE
+
-
CN607
5P
GND
KEY4
SW LED
LED+9V
CN606
5P
(EXCEPT RG490/RG590:UK)
ST2
ST1
ST5
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
RECEIVER
S11
REMOTE CONTROL
S12
C631
47
10V
R744
22k
S13
R628
47
R743
22k
C622
2.2
50V
C621
2.2
50V
S14
R627
100
RMS
R746
4.7k
IC610
RPM7240-H18
KEY1 OUT
R745
4.7k
C712
22 50V
C710
0.1
C711
0.1
S15
S16
VF
R741
22
-VFL
ST1
ST2
ST3
R632
10k
R609
100
TCM-SYNC
S18
SW LED
S19
O-TCM-SYNC
∗D601-605
S20
Q601-605
SOL-A
FLUORESCENT INDICATOR TUBE
S21
G13
G11
STBY-LED
STBY
G10
KEY0
KEY0
G9
RMS
DECK CONTROLLER
VDI
VFD-DI
VOLUME
VFD-CE
G10
I-HALF-A
G9
I-REC-SW
G4
VCE
G3
M+9V
R766 2.2k
R718 100
R765 47k
G8
I-REEL-B
G7
I-HALF-B
NC
G5
VDD0
M-GND
R715 100
R763 2.2k
D-GND
C708
0.1
G4
AVDD
G3
VSS0
G2
KEY4
G1
KEY3
C709
47
10V
B-SOL
KEY2
KEY1
AVSS
I-MODEL
CE
NC
NC
I-JOG B
I-JOG A
SO1
SI1
SCK1
XRESET
IC
X2
R607
10k
X1
C641
0.01
11
R680
22k
R681
47k
Q701,704
CAPSTAN/REEL MOTOR DRIVE
R608
10k
∗R713
R713
∗
0(RG490/RG590:UK)
1k(EXCEPT RG490/RG590:UK)
R771
1k
R690
∗
∗R690
R772
10k
Q704
KTA1273-Y-AT
10k(RG490/RG590:UK)
Q701
RT1N431C-TP-1
R773
1k
(EXCEPT RG490/RG590:UK)
R710 1k
R711 1k
C707 4700p
R709 2.2k
R708 100
Q705
KTA1271Y-AT
Q702
RT1N431C-TP-1
KEY3
KEY4
VCE
K1-OUT
SOL-A
D711
MC2836
Q702,705
KEY3
JOG-B
JOG-A
KEY0
STBY
SW OUT
R651
47k
R674
4.7k
R671
47k
R663
2.2k
R662
2.2k
R673
2.2k
R670
22k
R672
2.2k
S623
S622
S621
S613
S612
R660
22k
R661
47k
S611
JOG-A
JOG-B
KEY3
KEY2
GND
JOG-B
KEY3
KEY2
GND
EXCEPT RG490/
CN604
5P
JOG-A
R617
10k
GND
KEY2 OUT
KEY0
STBY
SW LED
CN602
6P
LED+9V
GND
KEY2 OUT
KEY0
STBY
R618
10k
CN608
4P
TUNING
TUNING
+
-
+
-
(RG490/RG590:UK)
CN605
5P
GND
KEY0
KEY2 OUT
STBY
SW LED
CN603
6P
LED+9V
GND
KEY2 OUT
KEY0
STBY
RG590:UK
CN609
4P
S624
(RG490/RG590:UK)
D622
SLR325MC
SUBWOOFER
R640
1k
C643
0.01
D611
SLR-325VCT31P
R682
2.2k
R683
2.2k
R684
4.7k
R685
4.7k
R686
10k
R687
22k
R688
47k
S631
S632
S633
S634
S635
S636
S637
S638
SURROUND
GROOVE
DISC 3
DISC 2
DISC 1
PLAY MODE/
REPEAT
R675
4.7k
(RG490/RG590:UK)
R678
47k
C644
0.01
R626
1k
STANDBY
R639
1k
ENTER
R677
22k
R656
10k
R676
10k
R655
4.7k
R654
4.7k
R653
2.2k
R652
2.2k
(RG490/RG590:UK)
EQ BAND
EXCEPT RG490/
SLEEP
DISC SKIP/
EX-CHANGE
S672
S628
S627
S626
S625
S606
S605
S604
S603
SUBWOOFER
CD SYNC
REC/PAUSE
ILLUMINATION
CD
TUNER/BAND
TAPE A/B
AUDIO IN
S602
S601
ROTARY ENCODER
RG590:UK
TUNING MODE
(MULTI JOG)
START
EXCEPT RG490:MX
DISPLAY
/RG590:MX
(RG490:MX/RG590:MX)
KARAOKE
HCD-RG490/RG590
56
56
R776
10k
Q703
RT1N431C-TP-1
C702 47 10V
R650
22k
R774
10k
Q706
KTA1271Y-AT
SOL-B
R775
1k
JOG-B
R707 100
JOG-A
R705 100
R704 0
R706 100
VOL-B
VDO
VOL-A
R703 100
R702 220
VCL
VDI
RST
VOL-A
VOL-B
R701 0
X701
4.19MHz
MOTOR
R691
47k
C705 470p
C704 470p
C703 0.1
22k(EXCEPT RG490/RG590:UK)
C701
0.1
BLOCK
B-HALF
NC
R712 1k
VDD1
JR602
0
M-GND
C642
0.01
THE ASSEMBLED
B-PHOTO
R762
47k
R610
100k
G1
M-GND
TAPE MECHANISM
DECK BLOCK
R764 47k
SUPPLIED WITH
G6
VSS1
C625 22 50V
CAPM+
B-REC-F
R716 100
G2
LED-GND
A-HALF
R717 100
G5
VCL
R719 100
I-REEL-A
G6
ROTARY ENCODER
VDO
R629 100
VFD-CLK
1
A-PHOTO
NC
IC701
mPD780232GC
-509-8BT-A
G7
S671
A-SOL
MOTOR
O-MOTOR
G8
RST
VFD-RESET
O-SOL-A
/LED DRIVER,TAPE MECHANISM
G13
G12
KEY4
O-SOL-B
S21
VDD(SWITCHED)
LED DRIVE
SOL-B
S20
LED DRIVE
(STREAM)
K1-OUT
Q621
2SC3052
TCM-SYNC
1L4345V22DOTDT02(RG490/RG590:UK)
TCM-SYNC
SIRCS
(Page 41)
ST4
R647
10k
NC
G11
(RG490:MX/RG590:MX)
SW OUT
S17
VDD(EVER)
VFD-DO
ST3
STREAM
LED4
S18
G12
(Page 37)
STREAM
LED3
S17
S19
R742
22
1L4344B22C0CDT02(EXCEPT RG490/RG590:UK)
D-GND
S16
R631
10k
I-VOL B
/RG590:MX
R633
10k
I-VOL A
EXCEPT RG490:MX
R634
10k
ST4
ST5
VF
R635
10k
STREAM LED2
S15
CN601
19P
STREAM LED1
NC
STREAM LED5
S1
S2
S3
S4
S5
S6
S8
D601
∗
Q601
2SC3052
Q602
2SC3052
S9
D602
∗
Q603
2SC3052
S7
R611
1k
S10
D603
∗
Q604
2SC3052
R601
1k
S11
R612
1k
S12
D604
∗
Q605
2SC3052
R602
1k
S13
D605
∗
R613
1k
S14
R603
1k
R614
1k
VDD2
R604
1k
R615
1k
VLOD
R605
1k
Q703,706
TRIGGER PLUNGER DRIVE
TRIGGER PLUNGER DRIVE
(DECK-A)
(DECK-B)
HCD-RG490/RG590
• Waveforms
– BD Board –
– CD Board –
1
IC201 1 (LRCK), 2 (LRCKI)
(CD play mode)
qa
– DECK Board –
IC101 ra (RFACO)
(CD play mode)
wa
Q453 (Base) (REC mode)
3.3 Vp-p
1 V/DIV, 10 µs/DIV
2
IC201 5 (BCK), 6 (BCKI)
(CD play mode)
qs
IC101 ys (LRCKI), yd (LRCK)
(CD play mode)
22.8 µs
IC201 u; (RFACO)
(CD play mode)
qd
Q453 (Collector) (REC mode)
es
4
IC201 <z/, (XTAO)
(CD play mode)
2 V/DIV, 5 µs/DIV
1 V/DIV, 20 ns/DIV
IC101 y; (BCKI), yh (BCK)
(CD play mode)
1 V/DIV, 200 ns/DIV
IC101 uj (XTAO)
(CD play mode)
2.3 Vp-p
59 ns
1 V/DIV, 20 ns/DIV
4.5Vp-p
59 ns
2 V/DIV, 20 ns/DIV
HCD-RG490/RG590
57
57
ta
IC701 4 (X2)
3.5 Vp-p
6.7 Vp-p
239 ns
2 V/DIV, 50 ns/DIV
rs
IC1001 4 (SBSY)
(CD-G play mode)
2.5 Vp-p
62.5 ns
472 ns
qf
IC1001 y; (XO1)
(CD-G play mode)
70 ns
IC901 qf (X2 (16MHZ))
6.1 Vp-p
4.5 Vp-p
Approx.
900 mVp-p
200 mV/DIV, 500 ns/DIV
ra
1 V/DIV, 10 µs/DIV
17 µs
1 V/DIV, 10 µs/DIV
1 V/DIV, 200 ns/DIV
3
ws
IC901 qa (XT2 (32.768KHZ))
3 Vp-p
500 mV/DIV, 5 µs/DIV
– PANEL Board –
– CD-G Board –
30.6 µs
17 µs
4.5 Vp-p
3.3 Vp-p
472 ns
ea
1.3 Vp-p
Approx.
900 mVp-p
200 mV/DIV, 500 ns/DIV
22.8 µs
– MAIN Board –
5.1 Vp-p
13.4 ms
2 V/DIV, 5 ms/DIV
1 V/DIV, 100 ns/DIV
HCD-RG490/RG590
7-34. PRINTED WIRING BOARD – TRANSFORMER Board (RG490) –
1
2
3
• See page 27 for Circuit Boards Location.
4
5
6
: Uses unleaded solder.
7
8
9
10
11
12
13
TRANSFORMER BOARD
A
(AC IN)
Q902
D901
2
CN901
1
R910
R911
RY901
R908
R904
R903
C908
B
C910
C909
D906
D908
JW929
F904
FH907
FH908
CN903
1
JW901
M1
JW937
C
POWER
BOARD
CN442
JW921
F905
8
JW922
(MX)
JW924
3
FH909
(Page 46)
FH910
PT901
MAIN POWER
TRANSFORMER
JW926
F906
JW920
JW902
JW912
D
FH911
FH912
CN907
1
7
(E2, E3, E51)
JW934
S901
(EXCEPT MX)
JW923
VOLTAGE
SELECTOR
230 – 240V T 220V t120V
K1
F907
E
FH913
MAIN
BOARD
CN001
FH914
K3
JW931
JW905
(Page 36)
(MX)
MAIN
BOARD
CN001
(Page 40)
JW904
JW930
JW909
JW933
F
(MX)
11
JW932
4
JW917
1
C911
(MX)
∗
JW910
JW925
PT902
JW928
BUILT IN TRANSFORMER
D905
∗ NOT REPLACEABLE:
D903
1
D902
C907
SUB POWER
TRANSFORMER
D904
G
R914
K
12
D910
A
9
5
A
1-869-310-
(12)
18
H
• Semiconductor
Location
Ref. No. Location
HCD-RG490/RG590
58
58
D901
D902
D903
D904
D905
D906
D908
D910
A-8
G-11
G-11
G-11
G-12
B-9
B-8
H-10
Q902
B-9
HCD-RG490/RG590
7-35. SCHEMATIC DIAGRAM – TRANSFORMER Board (RG490) –
F904
T8AL 250V
CN903
3P
AC1
GND
AC1
(Page 47)
240V
F905
T8AL 250V
C907
0.1
C908
220
63V
W901
(E2,E3,E51)
JW901
220V
F906
T3.15A 250V
JW902
120V
(CHASSIS)
JW909
(E2,E3,E51)
CN907
11P
(EXCEPT MX)
F907
T3.15A 250V
AC3
S901
D910
MC2838
AC4
R908
1
VF
STBY-RELAY
120V
RY901
TRANSFORMER
220V
D903
10EDB40-TB3
-27V
230-240V
D902
10EDB40-TB3
JW917
REGULATOR
ACP
JW925
SUB POWER
Q902
2SB1238PQR
-TV2
EVER +10V
PT902
D908
10EDB40-TB3
D-GND
(MX)
SELECTOR
R914
10k
VF
(Page 43)
(MX)
VOLTAGE
AC4
(Page 39)
JW910
JW912
AC3
∗NOT REPLACEABLE:
-VFL
JW904
D904
10EDB40-TB3
BUILT IN TRANSFORMER
(MX)
PT901
JW905
CN901
2P
MAIN POWER
C910
100
50V
R904
1k
D906
UDZW-TE17
-27B
R903
10k
TRANSFORMER
C911
1000
25V
C909
10
50V
∗R910
0(MX)
R910
∗
HCD-RG490/RG590
59
59
22(E2,E3,E51)
D905
10EDB40-TB3
R911
0
D901
1SS355TE-17
(AC IN)
HCD-RG490/RG590
7-36. PRINTED WIRING BOARD – TRANSFORMER Board (RG590) –
2
1
A
3
• See page 27 for Circuit Boards Location.
4
5
6
: Uses unleaded solder.
7
8
9
10
11
12
13
• Semiconductor
Location
Ref. No. Location
C-8
H-11
H-12
H-11
H-12
B-8
C-8
H-10
Q902
B-9
JW911
D906
F909
C910
R904
FH910
FH909
C909
Q902
R903
R910
RY901
D901
D908
R911
CN901
2
C908
R908
TRANSFORMER BOARD
F905
JW927
B
D901
D902
D903
D904
D905
D906
D908
D910
CN905
FH911
FH912
5
1
C
JW901
M2
POWER
BOARD
CN442
F904
(AC IN)
FH907
JW921
PT901
MAIN POWER
TRANSFORMER
8
JW922
D
(Page 48)
1
FH908
(UK, MX, AR)
JW924
F908
FH916
FH915
JW929
JW902
JW926
JW920
JW912
CN907
F906
E
1
7
JW934
(E2, E3, E51)
S901
VOLTAGE
SELECTOR
230 – 240V T 220V t120V
FH918
FH917
(EXCEPT MX)
JW923
K2
(E2, E3, E51, MX)
MAIN
BOARD
CN001
(UK, AR)
(Page 36)
F907
(UK, AR)
JW908
FH913
FH914
K4
JW903
(E2, E3, E51, MX)
JW909
(Page 40)
JW930
(MX)
MAIN
BOARD
CN001
JW904
JW906
(UK, AR)
JW905
F
(MX)
11
C911
4
JW917
1
G
(UK, MX, AR)
∗
JW910
C914
D905
∗ NOT REPLACEABLE:
D903
1
D902
PT902
SUB POWER
TRANSFORMER
D904
JW928
JW925
C907
BUILT IN TRANSFORMER
R914
H
K
11
D910
A
9
5
19
I
HCD-RG490/RG590
60
60
A
1-868-913-
(11)
HCD-RG490/RG590
7-37. SCHEMATIC DIAGRAM – TRANSFORMER Board (RG590) –
PT901
MAIN POWER
F908
T8AL 250V
TRANSFORMER
F904
T6.3AL 250V
CN905
5P
AC-VH
AC-VL
GND
F905
T6.3AL 250V
AC-VL
AC-VH
(Page 49)
F909
T8AL 250V
C907
0.1
F906
T3.15AL 250V
W901
240V
(E2,E3,E51)
220V
JW902
120V
(CHASSIS)
CN907
11P
JW909
(E2,E3,E51)
C908
220
63V
AC3
(EXCEPT MX)
(UK,MX,AR)
F907
T3.15AL 250V
AC3
S901
VOLTAGE
D910
MC2838
AC4
VF
R908
1
VF
C914
1000p
JW917
D906
UDZW-TE17
-27B
R903
10k
C911
1000
25V
C909
10
50V
HCD-RG490/RG590
61
(MX)
∗R910
JW905
D905
10EDB40-TB3
R911
0
22(EXCEPT MX)
D901
1SS355TE-17
CN901
2P
JW906
(AC IN)
0(MX)
R910
∗
61
JW903
JW904
D904
10EDB40-TB3
BUILT IN TRANSFORMER
R904
1k
230-240V
D902
10EDB40-TB3
∗NOT REPLACEABLE:
-VFL
(MX)
C910
100
50V
220V
D903
10EDB40-TB3
REGULATOR
120V
RY901
TRANSFORMER
-27V
ACP
JW925
SUB POWER
Q902
2SB1238PQR
-TV2
STBY-RELAY
PT902
D908
10EDB40-TB3
D-GND
EVER +10V
SELECTOR
R914
10k
(E2,E3,E51,MX)
(Page 43)
JW910
JW912
AC4
(Page 39)
JW901
(UK,AR)
JW908
(UK,AR)
(E2,E3,E51,MX)
HCD-RG490/RG590
CH3FIN
CH3RIN
GND
MUTE
POWVCC
CH3OUTF
CH3OUTR
CH4OUTF
CH4OUTR
THERMAL
PROTECTION
CH4IN
VIN 1
CH4CAPA
IC251 BA5947FM-E2
OUTVREF
IC203 BH18LB1WG-TR
OPOUT
– BD Board –
PREVCC
• IC Block Diagrams
– CD Board –
28
27
26
25
24
23
22
21
20
19
18
17
16
15
OVER CURRENT
PROTECTION
GND 2
VOLTAGE
REFERENCE
STBY 3
CONTROL
BLOCK
MUTING
D
D
D
D
–
+
5 VOUT
+ –
INTERFACE
4 NC
LEVEL SHIFT
INTERFACE
INTERFACE
15
MUTING
D
D
D
D
1 2
3
4
5
6
7
8
9
10
11
12
13
14
CH1OUTF
CH4OUTR
16
CH1OUTR
CH4OUTF
17
CH2OUTF
CH3OUTR
18
+ –
INTERFACE
IC303 BH15FB1WG
LEVEL SHIFT
INTERFACE
VIN 1
THERMAL
PROTECTION
INTERFACE
OVER CURRENT
PROTECTION
+ –
D
VREF
D
D
D
GND 2
VOLTAGE
REFERENCE
STBY 3
CONTROL
BLOCK
–
+
5 VOUT
14
CH1OUTF
13
CH1OUTR
12
CH2OUTF
11
CH2OUTR
10
POWVCC
9
VREFIN
8
GND
7
CH2RIN
6
CH2FIN
5
CH1RIN
4
CH1FIN
3
SW
OPIN–
OPIN+
1 2
HCD-RG490/RG590
62
62
D
CH2OUTR
CH3OUTF
19
D
POWVCC
POWVCC
20
D
VREFIN
MUTE
21
D
GND
GND
22
CH2RIN
CH3RIN
23
CH2FIN
CH3FIN
24
CH1RIN
CH4IN
25
CH1FIN
CH4CAPA
26
SW
OUTVREF
27
VREF
OPIN–
OPIN+
OPOUT
28
+ –
PREVCC
IC402 BA5947FM-E2
4 NC
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
SBSY/
BCKIB
SFSY/
LRCKIB
TXO
VDD
CKI/CLCK/
IRQ/FI0
VSS
PIO0/
SDI2/IO0
PIO1/
SDI3/IO1
PIO2/
IO2
PIO3/
IO3
BUS3/FI1/
PIO4/IO4
BUS2/FI2/
PIO5/IO5
BUS1/FI3/
PIO6/IO6
BUS0/
PIO7/IO7
SDO1//WE
LRCKO 13
BCKO 12
BCKIA 15
SDI0 14
AX
Interrupt
Control
CRAM
4k word
/MICK 7
ERAM
4k word
x1
2k word
x1
MX
A0
YRAM
4k word
MIDIO 6
Timer
DIT
JTAG
I/F
CROM
4k word
x9
MY
MAC
register
XO/X1/X2
Y0/Y1/Y2
A1
MZ
VDDT 9
X-Pointer
register
AY
ALU
A2
XRAM
4k word
X-Bus
Y-Bus
Program
Control
SRAM I/F
1k bit
SRAM
/RESET 2
SRAM/DRAM
I/F
PROM
4k word
x5
PRAM
4k word
40 bit
Timing
Generator
CDP
Control
I/F
SDO0 11
A3
/MIACK/
8
AD16
round & limit
STANDBY 3
Instruction
Decoder
1
Address Calc.
2sets
Y-Pointer
register
VSS 10
round & limit
MCU I/F
/MILP 5
C-Pointer
register
Audio I/F
VDDP
DATA/
SDI1
VCOI
VSSP
MIMD
TEST
VSSX
XI
XO
VDDX
CKO/
PO13/
AD16
VDD
VSS
PO0/
AD0
PO1/
AD1
PO2/
AD2
PO3/
AD3
PO4/
AD4
HCD-RG490/RG590
IC301 TC94A34FG-002
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
VCO
48 PO5/AD5
/MICS 4
Bus
Switch
Flag
General
Input/
Output
Port
LRCKIA 16
47 PO6/AD6
46 PO7AD7
45 AD8
44 AD9
43 AD10
42 VDDT
41 SRMSTB
40 VDDM
39 PO8/AD11
38 PO9/AD12
/CCE/
37 PO10/
AD13
BUCK/
36 PO11/
AD14
SDO3/
35 /OE
PO12/
34 AD15/
/CAS
SDO2/
33 /CS/
/RAS
Sub Code I/F
63
HCD-RG490/RG590
– DRIVER Board –
IC701, 712 BA6956AN
TSD
4
5
6
7
8
9
VM
VCC
FIN
GND
RIN
OUT2
3
OUT1
2
RNF
1
VREF
CONTROL LOGIC
– MAIN Board –
INB1
INC1
IND1
REC1
BASS1
BASS21
TRE1
MID11
MID21
TONEOUT1
IC101 R2S15207FP
30 29 28
27
26
25
24
23
22
21
TONE CONTROL
(BASS, TREBLE, MID)
RECOUT
TONE
ON/OFF
VOCALCUT
ON/OFF
20 VOLIN1
INA1 31
VOLUME
INPUT
SELECTOR
GND 32
+
19 BB11
18 BB21
TONE ATT
BASSBOOST
ON/OFF
REFIN 33
17 OUT1
REF
SURROUND
VOCAL CUT
SUR1 34
SUR2 35
+
MCU
INTERFACE
MONO/STEREO
16 DATA
15 CLOCK
14 OUT2
MIX1 36
MIX2 37
BASSBOOST
ON/OFF
TONE ATT
+
13 BB22
12 BB12
VCC 38
INPUT
SELECTOR
VOLUME
INA2 39
INB2 40
RECOUT
11 VOLIN2
VOCALCUT
ON/OFF
64
1 2
3
4
5
6
7
8
9
10
INC2
IND2
REC2
SAOUT
BASS12
BASS22
TRE2
MID12
MID22
TONEOUT2
TONE CONTROL
(BASS, TREBLE, MID)
TONE
ON/OFF
HCD-RG490/RG590
IC102 R2S15208SP
REFIN 1
REF AMP
LIN 2
10 REFOUT
9 LOUT
3BAND
PARAMETRIC
EQUALIZER
RIN 3
8 ROUT
7 GND
VCC 4
MCU
INTERFACE
DATA 5
6 CLOCK
– MIC, AUX, HP Board –
NC
VCC
CLOCK
REF
OP2IN
OP2OUT
LPF2IN
LPF2OUT
IC802 M65850FP-E1
16
15
14
13
12
11 10
9
OSCILLATOR
D/A
LPF2
1/2 VCC
DO1
CLOCK
AUTO
RESET
RESET
MAIN
CONTROL
D1
DO0
MO
20KBIT
SRAM
MI
A/D
1
2
3
4
5
6
7
8
NC
LPF1IN
LPF1OUT
OP1OUT
OP1IN
CC1
CC2
GND
LPF1
– CD-G Board –
IC1005 SN74AHCT04NSR
IC1006 NJM2561F1-TE2
VCC
14
1
13
2
12
3
11
4
10
5
9
6
8
POWER SAVE
1
VOUT
2
VSAG
3
75 OHM
DRIVER
LOW-PASS
FILTER
6
VCC
5
GND
4
VIN
CLAMP
7
GND
65
HCD-RG490/RG590
• IC Pin Function Description
CD BOARD IC201 CXD3014A-201R (CD DSP)
Pin No.
Pin Name
I/O
1
LRCK
O
L/R sampling clock signal output terminal
2
LRCKI
I
L/R sampling clock signal input terminal
3
PCMD
O
Serial data output terminal
4
PCMDI
I
Serial data input terminal
5
BCK
O
Bit clock signal output terminal
6
BCKI
I
Bit clock signal input terminal
7
XTACN
I
Oscillation circuit on/off control signal input from the system controller
"L": oscillation stop, "H": self-oscillation
8
XRST
I
System reset signal input from the system controller "L": reset
9
VSS
-
Ground terminal
10
IREQ-MP3
O
MP3 data request signal output to the system controller
11
CD serial data transfer clock signal input from the system controller
66
Description
CLOK
I
12
DATA2
I
MP3 serial data input from the system controller
13
XLAT-MP3
I
MP3 serial data latch pulse signal input from the system controller
14
REQ-MP3
I
MP3 data request signal input from the system controller
15
ACK-MP3
O
MP3 acknowledge signal output to the system controller
16
XLAT
I
CD serial data latch pulse signal input from the system controller
17
VDD
-
Power supply terminal (+1.8V)
18
SVSS
-
Ground terminal
19
SVDD
-
Power supply terminal (+1.8V)
20
SENS
O
Internal status (SENSE) signal output to the system controller
21
WFCK
O
Write frame clock signal output terminal Not used
22
XUGF
O
XUGF signal output terminal Not used
23
XPCK
O
XPCK signal output terminal Not used
24
GFS
O
Guard frame sync signal output terminal Not used
25
C2PO
O
C2 pointer signal output terminal Not used
26
SCOR
O
Subcode sync (S0+S1) detection signal output to the system controller
27
VDD
-
Power supply terminal (+1.8V)
28
COUT
O
Numbers of track counted signal output terminal Not used
29
SVSS
-
Ground terminal
30
SVDD
-
Power supply terminal (+1.8V)
31
MIRR
O
Mirror signal output terminal Not used
32
DFCT
O
Defect signal output terminal Not used
33
FOK
O
Focus OK signal output terminal Not used
34
VSS
-
Ground terminal
35
VDD
-
Power supply terminal (+1.8V)
36
Ground terminal
VSS
-
37
LOCK
O
GFS is sampled by 460 Hz "H" output when GFS is "H" Not used
38
MDP
O
Spindle motor servo control signal output terminal
39
SSTP
I
Disc inner position detection signal input terminal
40
IOVSS1
-
Ground terminal
41
SFDR
O
Sled servo drive signal (+) output terminal
42
SRDR
O
Sled servo drive signal (-) output terminal
43
TFDR
O
Tracking servo drive signal (+) output terminal
44
TRDR
O
Tracking servo drive signal (-) output terminal
45
FFDR
O
Focus servo drive signal (+) output terminal
HCD-RG490/RG590
Pin No.
Pin Name
I/O
46
FRDR
O
47
IOVDD1
-
Power supply terminal (+3.3V)
48
AVDD0
-
Power supply terminal (+3.3V)
49
AVSS0
-
Ground terminal
50
E
I
E signal input from the optical pick-up block
51
F
I
F signal input from the optical pick-up block
52
TEI
I
Tracking error signal input terminal
53
TEO
O
Tracking error signal output terminal
54
FEI
I
Focus error signal input terminal
55
FEO
O
Focus error signal output terminal
56
VC
O
Middle point voltage output terminal
Description
Focus servo drive signal (-) output terminal
57
A
I
A signal input from the optical pick-up block
58
B
I
B signal input from the optical pick-up block
59
C
I
C signal input from the optical pick-up block
I
D signal input from the optical pick-up block
60
D
61
AVDD4
-
Power supply terminal (+3.3V)
62
RFDCO
O
RFDC signal output terminal Not used
63
PDSENS
I
Reference voltage input terminal for PD
64
AC_SUM
O
RFAC summing amplifier signal output terminal
65
EQ_IN
I
RF equalizer circuit input terminal
66
LD
O
Laser diode on/off control signal output to the automatic power control circuit
"H": laser diode on
67
PD
I
Light amount monitor input from the laser diode of optical pick-up block
68
RFC
I
Equalizer cut off frequency adjustment terminal
69
AVSS4
-
Ground terminal
70
RFACO
O
EFM signal output terminal
71
RFACI
I
EFM signal input terminal
72
AVDD3
-
Power supply terminal (+3.3V)
73
BIAS
I
Asymmetry circuit constant current input terminal
74
ASYI
I
Playback EFM asymmetry comparator voltage input terminal
75
ASYO
O
Playback EFM full-swing output terminal
76
VPCO
O
Charge pump output terminal for broad-band EFM PLL
77
VCTL
I
VCO2 control voltage input terminal for broad-band EFM PLL
78
AVSS3
-
Ground terminal
79
CLTV
I
VCO1 control voltage input terminal for multiplier
80
FILO
O
Filter output terminal for master PLL
81
FILI
I
Filter input terminal for master PLL
82
PCO
O
Charge pump output terminal for master PLL
83
SVSS
-
Ground terminal
84
SVDD
-
Power supply terminal (+1.8V)
85
SSTB-MP3
I
MP3 standby on/off control signal input terminal "L": standby Not used
86
VDD
-
Power supply terminal (+1.8V)
87
VSS
-
Ground terminal
88
TEST1
I
Input terminal for the test Normally: fixed at "L"
89
DATA
I
CD serial data input from the system controller
90
CLK2
I
MP3 serial data transfer clock signal input from the system controller
91
SVSS
-
Ground terminal
67
HCD-RG490/RG590
Pin No.
Pin Name
I/O
92
SVDD
-
Power supply terminal (+2.5V)
93
JTAGTCK
I
Clock signal input terminal (for JTAG) Not used
94
JTAGTDI
I
Data input terminal (for JTAG) Not used
95
JTAGTDO
O
Data output terminal (for JTAG) Not used
96
JTAGTMS
I
Mode select signal input terminal (for JTAG) Not used
97
TRST
I
Reset signal input terminal (for JTAG) Not used
98
VSS
-
Ground terminal
99
VDD
-
Power supply terminal (+1.8V)
100
IOVDD2
-
Power supply terminal (+3.3V)
101
DOUT
O
Digital audio signal output terminal Not used
102
TEST
I
Input terminal for the test Normally: fixed at "L"
103
TES1
I
Input terminal for the test Normally: fixed at "L"
68
Description
104
IOVSS2
-
Ground terminal
105
PLLVDD
-
Power supply terminal (+1.8V)
106
PLLVSS
-
Ground terminal
107
XVSS
-
Ground terminal
108
XTAO
O
System clock output terminal (16.9344 MHz)
109
XTAI
I
System clock input terminal (16.9344 MHz)
110
XVDD
-
Power supply terminal (+1.8V)
111
AVDD1
-
Power supply terminal (+3.3V)
112
AOUT1
O
L-ch analog audio signal output terminal
113
VREFL
O
L-ch reference voltage output terminal
114
AVSS1
-
Ground terminal
115
AVSS2
-
Ground terminal
116
VREFR
O
R-ch reference voltage output terminal
117
AOUT2
O
R-ch analog audio signal output terminal
118
AVDD2
-
Power supply terminal (+3.3V)
119
IOVDD0
-
Power supply terminal (+3.3V)
120
IOVSS0
-
Ground terminal
HCD-RG490/RG590
BD BOARD IC101 CXD3059AR (CD DSP)
Pin No.
Pin Name
I/O
1
MIRR
O
Mirror signal output terminal Not used
Description
2
DFCT
O
Defect signal output terminal Not used
3
FOK
O
Focus OK signal output terminal Not used
4
VSS
-
Ground terminal
5
LOCK
O
GFS is sampled by 460 Hz "H" output when GFS is "H" Not used
6
MDP
O
Spindle motor servo control signal output terminal
7
SSTP
I
Disc inner position detection signal input terminal
8
IOVSS0
-
Ground terminal
9
SFDR
O
Sled servo drive signal (+) output terminal
10
SRDR
O
Sled servo drive signal (-) output terminal
11
TFDR
O
Tracking servo drive signal (+) output terminal
12
TRDR
O
Tracking servo drive signal (-) output terminal
13
FFDR
O
Focus servo drive signal (+) output terminal
14
FRDR
O
Focus servo drive signal (-) output terminal
15
IOVDD1
-
Power supply terminal (+3.3V)
16
AVDD0
-
Power supply terminal (+3.3V)
17
AVSS0
-
Ground terminal
18
NC
-
Not used
19
E
I
E signal input from the optical pick-up block
20
F
I
F signal input from the optical pick-up block
21
TEI
I
Tracking error signal input terminal
22
TEO
O
Tracking error signal output terminal
23
FEI
I
Focus error signal input terminal
24
FEO
O
Focus error signal output terminal
25
VC
O
Middle point voltage output terminal
26
A
I
A signal input from the optical pick-up block
27
B
I
B signal input from the optical pick-up block
28
C
I
C signal input from the optical pick-up block
29
D
I
D signal input from the optical pick-up block
30
NC
-
Not used
31
AVDD4
-
Power supply terminal (+3.3V)
32
RFDCO
O
RFDC signal output terminal Not used
33
PDSENS
I
Reference voltage input terminal for PD
34
AC_SUM
O
RFAC summing amplifier signal output terminal
35
EQ_IN
I
RF equalizer circuit input terminal
36
LD
O
Laser diode on/off control signal output to the automatic power control circuit
"H": laser diode on
37
PD
I
Light amount monitor input from the laser diode of optical pick-up block
38
NC
-
Not used
39
RFC
I
Equalizer cut off frequency adjustment terminal
40
AVSS4
-
Ground terminal
41
RFACO
O
EFM signal output terminal
42
RFACI
I
EFM signal input terminal
43
AVDD3
-
Power supply terminal (+3.3V)
44
BIAS
I
Asymmetry circuit constant current input terminal
45
ASYI
I
Playback EFM asymmetry comparator voltage input terminal
69
HCD-RG490/RG590
Pin No.
Pin Name
I/O
46
ASYO
O
Playback EFM full-swing output terminal
47
VPCO
O
Charge pump output terminal for broad-band EFM PLL
48
VCTL
I
VCO2 control voltage input terminal for broad-band EFM PLL
49
AVSS3
-
Ground terminal
50
CLTV
I
VCO1 control voltage input terminal for multiplier
51
FILO
O
Filter output terminal for master PLL
52
FILI
I
Filter input terminal for master PLL
53
PCO
O
Charge pump output terminal for master PLL
70
Description
54
AVDD5
-
Power supply terminal (+3.3V)
55
DDVROUT
O
DC/DC converter output terminal
56
DDVRSEN
O
DC/DC converter output voltage monitor input terminal
57
AVSS5
-
Ground terminal
58
DDCR
I
Input terminal for the test
59
NC
-
B signal input from the optical pick-up block
60
BCKI
I
Bit clock signal input terminal
61
PCMDI
I
Serial data input from the MP3 decoder
62
LRCKI
I
L/R sampling clock signal input terminal
63
LRCK
O
L/R sampling clock signal output terminal
64
VSS
-
Ground terminal
65
PCMD
O
Serial data output to the MP3 decoder
66
BCK
O
Bit clock signal output terminal
67
VDD
-
Power supply terminal (+3.3V)
68
EMPH
O
"L" is output when playback disc is emphasis off
"H" is output when playback disc is emphasis on Not used
69
EMPHI
O
"L" is input when de-emphasis is off
70
IOVDD2
-
Power supply terminal (+3.3V)
71
DOUT
O
Digital audio signal output terminal
72
TEST
I
Input terminal for the test
Normally: fixed at "L"
Normally: fixed at "L"
Normally: fixed at "L"
"H" is output when de-emphasis is on
Not used
73
TEST1
I
Input terminal for the test
74
IOVSS2
-
Ground terminal
75
NC
-
Not used
76
XVSS
-
Ground terminal
77
XTAO
O
System clock output terminal (16.9344 MHz)
78
XTAI
I
System clock input terminal (16.9344 MHz)
79
XVDD
-
Power supply terminal (+1.8V)
80
AVDD1
-
Power supply terminal (+3.3V)
81
AOUT1
O
L-ch analog audio signal output terminal
82
VREFL
O
L-ch reference voltage output terminal
83
AVSS1
-
Ground terminal
84
AVSS2
-
Ground terminal
85
VREFR
O
R-ch reference voltage output terminal
86
AOUT2
O
R-ch analog audio signal output terminal
87
AVDD2
-
Power supply terminal (+3.3V)
88
NC
-
B signal input from the optical pick-up block
89
IOVDD0
-
Power supply terminal (+3.3V)
90
RMUT
O
Muting control signal (for R-ch) output terminal
Not used
91
LMUT
O
Muting control signal (for L-ch) output terminal
Not used
92
NC
-
B signal input from the optical pick-up block
Not used
HCD-RG490/RG590
Pin No.
Pin Name
I/O
Description
93
XTSL
I
Input terminal for the system clock frequency setting
"L": 16.9344 MHz, "H": 33.8688MHz Fixed at "L" in this set
94
IOVSS0
-
Ground terminal
95
XTACN
I
Oscillation circuit on/off control signal input from the system controller
"L": oscillation stop, "H": self-oscillation
96
SQSO
O
Subcode Q data output terminal Not used
97
SQCK
I
Subcode Q data reading clock signal input terminal Not used
98
SBSO
O
Subcode serial data output to the CD graphic decoder
99
EXCK
I
Subcode serial data reading clock signal input from the CD graphic decoder
100
XRST
I
System reset signal input from the system controller "L": reset
101
SYSM
I
System muting on/off control signal input terminal "H": muting on Fixed at "L" in this set
102
DATA
O
CD serial data input from the system controller
103
VSS
-
Ground terminal
104
XLAT
I
CD serial data latch pulse signal input from the system controller
105
CLOCK
I
CD serial data transfer clock signal input from the system controller
106
VDD
-
Power supply terminal (+3.3V)
107
SENS
O
Internal status (SENSE) signal output to the system controller
108
SCLK
I
SENSE serial data reading clock signal input terminal Not used
109
ATSK
O
Output terminal for anti-shock Not used
110
WFCK
O
Write frame clock signal output to the CD graphic decoder
111
XUGF
O
XUGF signal output terminal Not used
112
XPCK
O
XPCK signal output terminal Not used
113
GFS
O
Guard frame sync signal output terminal Not used
114
C2PO
O
C2 pointer signal output terminal Not used
115
SCOR
O
Subcode sync (S0+S1) detection signal output to the system controller and CD graphic decoder
116
VDD
-
Power supply terminal (+3.3V)
117
C4M
O
4.2336 MHz clock signal output terminal Not used
118
WDCK
O
Guard subcode sync (S0+S1) detection signal output terminal Not used
119
COUT
O
Numbers of track counted signal output to terminal Not used
120
NC
-
Not used
71
HCD-RG490/RG590
MAIN BOARD IC901 uPD78F0547GC (S)-UBT-A (SYSTEM CONTROLLER)
Pin No.
Pin Name
1
I-AC-PULSE
I
AC power detection signal input terminal
2
O-REC/PB
O
Recording/playback selection signal output terminal "L": playback, "H": recording
3
O-REC-MUTE
O
Recording muting on/off control signal output terminal "L": muting on
72
I/O
Description
4
O-BIAS
O
Recording bias on/off control signal output terminal "H": bias on
5
O-STK-MUTE
O
Standby signal output to the power amplifier (for front speaker)
6
O-SW_GAIN
O
Sub woofer gain control signal output terminal Not used
7
O-POWER-RELAY
O
Power on/off relay drive signal output terminal "H": power on
8
O-XM-POWER3.3
O
Power on/off control signal output terminal for XM section Not used
9
I-AC-CUT
I
AC power off detection signal input terminal
10
I-XRESET
I
System reset signal input from the reset signal generator "L": reset
For several hundreds msec. after the power supply rises, "L" is input, then it changes to "H"
11
XT2 (32.768KHZ)
O
Sub system clock output terminal (32.768 kHz)
12
XT1 (32.768KHZ)
I
Sub system clock input terminal (32.768 kHz)
13
FLMDO
I
Internal flash memory data writing mode control signal input terminal
14
X2 (16MHZ)
O
Main system clock output terminal (16 MHz)
15
X1 (16MHZ)
I
Main system clock input terminal (16 MHz)
16
REGC
-
External capacitor connection terminal for regulator
17
VSS
-
Ground terminal
18
EVSS
-
Ground terminal
19
VDD
-
Power supply terminal (+3.3V)
20
EVDD
-
Power supply terminal (+3.3V)
21
O-SYS-MUTE
O
Muting on/off control signal output terminal "L": muting on
22
O-SWR
O
Sub woofer speaker on/off relay drive signal output terminal "L": sub woofer speaker on
23
O-FRONT-SPRELAY
O
Front speaker on/off relay drive signal output terminal "H": front speaker on
24
O-XTCN
O
Oscillation circuit on/off control signal output to the CD DSP
"L": oscillation stop, "H": self-oscillation
25
O-MP3-RST
O
System reset signal output to the MP3 decoder "L": reset
(RG490: Mexican/RG590: Mexican models)
26
O-MP3-XLAT/
O-MP3-CS
O
MP3 serial data latch pulse signal output to the CD DSP
(Except RG490: Mexican/RG590: Mexican models)
MP3 chip select signal output to the MP3 decoder (RG490: Mexican/RG590: Mexican models)
27
I-MP3-ACK
I
MP3 acknowledge signal input from the CD DSP
(Except RG490: Mexican/RG590: Mexican models)
MP3 acknowledge signal input from the MP3 decoder
(RG490: Mexican/RG590: Mexican models)
28
O-XLAT/
O-MP3-STB
O
CD serial data latch pulse signal output to the CD DSP
(Except RG490: Mexican/RG590: Mexican models)
Standby signal output to the MP3 decoder (RG490: Mexican/RG590: Mexican models)
I
MP3 data request signal input from the CD DSP
(Except RG490: Mexican/RG590: Mexican models)
MP3 data request signal input from the MP3 decoder
(RG490: Mexican/RG590: Mexican models)
O
MP3 data request signal output to the CD DSP
(Except RG490: Mexican/RG590: Mexican models)
MP3 serial data latch pulse signal output to the MP3 decoder
(RG490: Mexican/RG590: Mexican models)
29
I-MP3-REQ
30
O-MP3-CS/
O-MP3-LP
HCD-RG490/RG590
Pin No.
Pin Name
31
O-D-MUTE/
O-XLT
I/O
Description
O
System reset signal output to the motor/coil driver "L": reset
(Except RG490: Mexican/RG590: Mexican models)
CD serial data latch pulse signal output to the CD DSP
(RG490: Mexican/RG590: Mexican models)
32
O-XRST
O
System reset signal output to the CD DSP "L": reset
(Except RG490: Mexican/RG590: Mexican models)
System reset signal output to the CD DSP and motor/coil driver "L": reset
(RG490: Mexican/RG590: Mexican models)
33
O-LM-R
O
Loading motor control signal output terminal (reverse direction)
34
O-LM-F
O
Loading motor control signal output terminal (forward direction)
35
O-TM-R
O
Table motor control signal output terminal (reverse direction)
36
O-TM-F
O
Table motor control signal output terminal (forward direction)
37
I-CD-NUMBERSENS
I
Disc table address sensor input terminal
38
I-OPEN-SW
I
Disc table open/close detection switch input terminal "L": open, "H": close
39
I-XTUNED
I
Tuning detection signal input terminal Not used
40
I-SCOR
I
Subcode sync (S0+S1) detection signal input from the CD DSP
41
O-CDG-RST/
I-RDS-CLK
I/O
System reset signal output to the CD graphics decoder "L": reset
(RG490: Mexican/RG590: Mexican models)
RDS data transfer clock signal input from the tuner (FM/AM) (RG590: UK model)
42
O-LC23003-CE
O
Chip enable signal output to the tuner (FM/AM)
43
O-LC23003-DO
O
Serial data output to the tuner (FM/AM)
44
O-LC23003-CLK
O
Serial data transfer clock signal output to the tuner (FM/AM)
45
I-LC23003-DI
I
Serial data input from the tuner (FM/AM)
46
O-VMUTE
O
Video muting on/off control signal output terminal "H": muting on
(RG490: Mexican/RG590: Mexican models)
47
O-CDG -POWER
O
Power on/off control signal output terminal for CD-G section "H": power on
(RG490: Mexican/RG590: Mexican models)
48
I-CDG-DET
I
CD-G detection signal input from the CD graphics decoder
49
O-CDG-MUTEDATA/
I-RDS-DATA
I/O
50
I-XM-RXD
I
Receive data input terminal Not used
51
O-XM-TXD
O
Transmit data output terminal Not used
52
O-CD-DATA
O
CD serial data output to the CD DSP
53
I-CD-SENS
I
Internal status (SENSE) signal input from the CD DSP
54
O-CD-CLK
O
CD serial data transfer clock signal output to the CD DSP
55
I-MIC-DET
I
Microphone plug insert detection signal input terminal "L": microphone plug insert
(Except RG490: 240V AC area in E/RG590: 240V AC area in E and UK models)
56
O-R2S15208SPDATA
O
Serial data output to the parametric equalizer (Except RG490/RG590: UK models)
57
O-AUDIO-CLK
O
Serial data transfer clock signal output to the electrical volume and parametric equalizer
(Except RG490/RG590: UK models)
Serial data transfer clock signal output to the electrical volume (RG490/RG590: UK models)
58
O-R2S15207FPDATA
O
Serial data output to the electrical volume
59
AVREF
I
Reference voltage (+3.3V) input terminal
60
AVSS
-
Ground terminal
61
I-HP/AUDIO IN
I
Headphone plug and audio in plug insert detection signal input terminal
"L": headphone plug or audio in plug insert
Muting control signal output to the CD graphics decoder
(RG490: Mexican/RG590: Mexican models)
RDS data input from the tuner (FM/AM) (RG590: UK model)
73
HCD-RG490/RG590
Pin No.
Pin Name
I/O
62
I-SUFFIX
I
74
Description
Setting terminal for the model and destination
63
I-VACS
I
VACS signal input terminal (A/D input)
64
I-PROTECTOR
I
Protector detection signal input terminal
65
I-KEY0
I
Front panel key input terminal (A/D input)
66
I-CD-ENCODER
I
Disc table address sensor (rotary encoder) input terminal
67
I-MODEL
I
Setting terminal for the model and destination
68
I-STREAM
I
Audio signal input for stream LED (A/D input)
69
O-STBY-LED
O
LED drive signal output terminal for STANDBY indicator "H": LED on
70
O-MP3-CLK
O
MP3 serial data transfer clock signal output to the CD DSP
(Except RG490: Mexican/RG590: Mexican models)
MP3 serial data transfer clock signal output to the MP3 decoder
(RG490: Mexican/RG590: Mexican models)
71
I-MP3-DATA
I
MP3 serial data input terminal (Except RG490: Mexican/RG590: Mexican models)
MP3 serial data input from the MP3 decoder (RG490: Mexican/RG590: Mexican models)
72
O-MP3-DATA
O
MP3 serial data output to the CD DSP (Except RG490: Mexican/RG590: Mexican models)
MP3 serial data input from the MP3 decoder (RG490: Mexican/RG590: Mexican models)
73
I-TCM-SYNC
I
Sync signal input from the tape mechanism deck controller
74
O-VFD-RESET
O
System reset signal output to the fluorescent indicator tube/LED driver "L": reset
75
O-VFD-CE
O
Chip enable signal output to the fluorescent indicator tube/LED driver
76
O-VFD-DATA
O
Serial data output to the fluorescent indicator tube/LED driver
77
I-VFD-DATA
I
Serial data input from the fluorescent indicator tube/LED driver
78
O-VFD-CLK
O
Serial data transfer clock signal output to the fluorescent indicator tube/LED driver
79
I-WAKEUP
I
Wake up signal input terminal
80
I-XSIRCS-IN
I
SIRCS signal input from the remote control receiver
HCD-RG490/RG590
CD-G BOARD IC1001 TC9411AFG (BS, K) (CD GRAPHICS DECODER)
Pin No.
Pin Name
I/O
1
SESUB
I
Not used
2
CLCK
O
Subcode serial data reading clock signal output to the CD DSP
3
DATA
I
Subcode serial data input from the CD DSP
4
SBSY
I
Subcode sync (S0+S1) detection signal input from the CD DSP
5
SFSY
I
Write frame clock signal input from the CD DSP
6
MUTE
I
Muting control signal input from the system controller
7
VDD1
-
Power supply terminal (+5V)
8
VSS1
-
Ground terminal
9
MCE
I
Chip enable signal input terminal
10
Description
Not used
MCDO
O
Serial data output terminal
11
Not used
MCDI
I
Serial data input terminal
12
MCCK
I
Serial data transfer clock signal input terminal
13
XWE
O
Write enable signal output to the D-RAM
Not used
14
XRAS
O
Row address strobe signal output to the D-RAM
15 to 22
VA0 to VA7
O
Address signal output to the D-RAM
23
VSS2
-
Ground terminal
24
Power supply terminal (+5V)
Not used
VDD2
-
25
VD0
I/O
Two-way data bus with the D-RAM
26
XCAS
O
Column address strobe signal output to the D-RAM
27
VD1
I/O
Two-way data bus with the D-RAM
28
XOE
O
Output enable signal output to the D-RAM
29, 30
VD2, VD3
I/O
Two-way data bus with the D-RAM
31
BLANKIN
I
Blanking signal input terminal
Not used
32
BIN
I
RGB (B) signal input terminal
Not used
33
GIN
I
RGB (G) signal input terminal
Not used
34
RIN
I
RGB (R) signal input terminal
Not used
35
XHSYNC
O
Horizontal synchronize signal output terminal
36
XVSYNC
O
Vertical synchronize signal output terminal
37
GDET
O
CD-G detection signal output to the systerm controller
38
VON
I
Video on control signal input terminal
39, 40
TEST1, TEST2
I
Test mode setting terminal
41
LINESW
I
Line switch input terminal
42
VREF
I
Reference voltage input terminal
43
AVDD
-
Power supply terminal (+5V)
44
VDOUT
O
Video signal output terminal
Not used
Not used
Not used
Not used
45
AVSS
-
Ground terminal
46, 47
BIAS1, BIAS2
I
Bias setting terminal
48
VSS3
-
Ground terminal
49
VDD3
-
Power supply terminal (+5V)
50
QNG
O
Not used
51
PNG
O
Not used
52
NTSC/PAL selection signal input terminal
DEN
I
53
FSC
O
Not used
54
XRESET
I
System reset signal input from the system controller
55
SENTSC
I
Not used
56
PDOWN
I
Power down signal input terminal
"L": reset
Not used
75
HCD-RG490/RG590
Pin No.
Pin Name
I/O
57
XI2
I
System clock input terminal (17.734475 MHz) (for PAL) Not used
58
XO2
O
System clock output terminal (17.734475 MHz) (for PAL) Not used
59
XI1
I
System clock input terminal (14.31818 MHz) (for NTSC)
60
XO1
O
System clock output terminal (14.31818 MHz) (for NTSC)
76
Description
HCD-RG490/RG590
PANEL BOARD IC701 uPD780232GC-509-8BT-A
(FLUORESCENT INDICATOR TUBE/LED DRIVER, TAPE MECHANISM DECK CONTROLLER)
Pin No.
Pin Name
I/O
1
VDD1
-
Description
Power supply terminal (+3.3V)
2
VSS1
-
Ground terminal
3
X1
I
System clock input terminal (4.19 MHz)
4
X2
O
System clock output terminal (4.19 MHz)
5
IC
I
Input terminal for the IC test Normally: fixed at "L"
6
XRESET
I
System reset signal input from the system controller "L": reset
7
SCK1
I
Serial data transfer clock signal input from the system controller
8
SI1
I
Serial data input from the system controller
9
SO1
O
Serial data output to the system controller
10
I-VOL A
I
Jog dial pulse input from the rotary encoder (VOLUME) (A phase input)
11
I-VOL B
I
Jog dial pulse input from the rotary encoder (VOLUME) (B phase input)
12
I-JOG A
I
Jog dial pulse input from the rotary encoder (multi jog) (A phase input)
13
I-JOG A
I
Jog dial pulse input from the rotary encoder (multi jog) (B phase input)
14, 15
NC
I
Not used
16
CE
I
Chip select signal input from the system controller
17
I-MODEL
I
Destination setting terminal
18
AVSS
-
Ground terminal
19 to 22
KEY1 to KEY4
I
Front panel key input terminal (A/D input)
23
VSS0
-
Ground terminal
24
AVDD
-
Power supply terminal (+5V)
25
VDD0
-
Power supply terminal (+5V)
26
NC
I
Not used
27
I-HALF-B
I
Deck-B cassette detection signal input from the tape mechanism deck block "L": cassette in
28
I-REEL-B
I
Deck-B tape reel rotating detection signal input from the tape mechanism deck block
29
I-REC-SW
I
Recording-proof detection signal input from the tape mechanism deck block
"L": recording possible
30
I-HALF-A
I
Deck-A cassette detection signal input from the tape mechanism deck block "L": cassette in
31
I-REEL-A
I
Deck-A tape reel rotating detection signal input from the tape mechanism deck block
32
NC
I
Not used
33
O-MOTOR
O
Capstan/reel motor drive signal output terminal "H": motor on
34
O-SOL-A
O
Deck-A side trigger plunger drive signal output terminal "H": plunger on
35
O-SOL-B
O
Deck-B side trigger plunger drive signal output terminal "H": plunger on
36
O-TCM-SYNC
O
Sync signal output to the system controller
37
SW LED
O
LED rive signal output of the SUBWOOFER indicator "H": LED on
38
NC
I
Not used
39 to 43
STREAM LED1 to
STREAM LED5
O
LED rive signal output of the stream indicator "H": LED on
44
NC
I
Not used
45 to 58
S1 to S14
O
Segment drive signal output to the fluorescent indicator tube
59
VDD2
-
Power supply terminal (+5V)
60
VLOD
-
Power supply terminal (-27V)
61 to 67
S15 to S21
O
Segment drive signal output to the fluorescent indicator tube
68 to 80
G13 to G11
O
Grid drive signal output to the fluorescent indicator tube
77
HCD-RG490/RG590
SECTION 8
EXPLODED VIEWS
NOTE:
• Items marked “*” are not stocked since they
• -XX and -X mean standardized parts, so they
are seldom required for routine service. Some
may have some difference from the original
delay should be anticipated when ordering
one.
these items.
• Color Indication of Appearance Parts
• The mechanical parts with no reference
Example:
number in the exploded views are not supplied.
KNOB, BALANCE (WHITE) . . . (RED)
• Accessories are given in the last of the
↑
↑
electrical parts list.
Parts Color Cabinet's Color
• Abbreviation
AR : Argentina model
E2 : 120V AC area in E model E51 : Chilean and Peruvian models
E3 : 240V AC area in E model MX : Mexican model
8-1.
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
CASE SECTION
8
(RG490: MX/RG590: MX)
4
7
CD mechanism deck
section-1
5
6
3
4
10
2
#1
MAIN board
section
#1
6
2
1
2
4
#1
PANEL board section
9
2
#1
Ref. No.
Part No.
Description
1
1
1
1
1
2-658-299-01
2-658-299-11
2-658-299-21
2-658-299-31
2-658-299-41
LID (CD) (RG590: E2, E51, AR)
LID (CD) (RG590: E3)
LID (CD) (RG490: E2, E51)
LID (CD) (RG490: E3/RG590: UK)
LID (CD) (RG490: MX)
1
2
3
4
5
2-658-299-51
3-363-099-32
2-599-855-11
3-254-143-11
1-828-975-21
LID (CD) (RG590: MX)
SCREW (CASE 3 TP2)
CASE (SIDE-L)
SCREW (B3), (+) BV TAPPING
WIRE (FLAT TYPE) (13 CORE)
(RG490: MX/RG590: MX)
78
Remark
Ref. No.
6
7
Part No.
Description
Remark
8
9
10
4-951-620-01 SCREW (2.6X8), +BVTP
A-1159-964-A CD-G BOARD, COMPLETE
(RG490: MX/RG590: MX)
2-599-854-11 CASE (TOP)
2-599-856-11 CASE (SIDE-R)
2-675-793-01 COVER (OP)
#1
7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S
HCD-RG490/RG590
8-2.
PANEL BOARD SECTION
55
54
55
63
53
55
56
(RG490/RG590: UK)
66
55
65
57
55
61
62
58
lid (top) section
60
59
52
51
64
Ref. No.
Part No.
Description
51
51
52
53
54
2-658-294-01
2-658-294-11
2-658-292-01
2-658-279-01
A-1159-677-A
KNOB (JOG) (RG590: E2, E3, E51, MX, AR)
KNOB (JOG) (RG490/RG590: UK)
KNOB (VOL A)
INDICATOR (POWER)
KEY LEFT BOARD, COMPLETE
(RG490: E2, E3, E51/RG590: UK)
Remark
54
A-1159-678-A KEY LEFT BOARD, COMPLETE
(RG590: E2, E3, E51, AR)
A-1159-679-A KEY LEFT BOARD, COMPLETE (RG590: MX)
A-1163-183-A KEY LEFT BOARD, COMPLETE (RG490: MX)
4-951-620-01 SCREW (2.6X8), +BVTP
2-658-275-01 KEY (POWER) (I/1, CD, TUNER/BAND,
TAPE A/B, AUDIO IN)
Ref. No.
59
60
60
54
54
55
56
57
58
59
2-658-274-01 KEY (REC)
2-658-276-01 KEY (CD) (DISC 1, DISC 2, DISC 3,
DISC SKIP/EX-CHANGE, A)
2-658-281-01 KEY (JOG) (GROOVE, SURROUND, ENTER,
EQ BAND) (RG490/RG590: UK)
61
62
63
63
63
63
64
65
66
Part No.
Description
Remark
2-658-281-11 KEY (JOG) (REPEAT, ENTER, SLEEP,
PLAY MODE/TUNING MODE)
(RG590: E2, E3, E51, MX, AR)
A-1159-681-A KEY RIGHT BOARD, COMPLETE
(EXCEPT RG490: MX/RG590: MX)
A-1159-682-A KEY RIGHT BOARD, COMPLETE
(RG490: MX/RG590: MX)
1-831-952-21 CABLE, FLEXIBLE FLAT (19 CORE)
1-831-779-21 CABLE, FLEXIBLE FLAT (11 CORE)
A-1159-666-A PANEL BOARD, COMPLETE
(RG490: E2, E3, E51/RG590: UK)
A-1159-667-A PANEL BOARD, COMPLETE
(RG590: E2, E3, E51, AR)
A-1159-668-A
A-1163-174-A
4-225-252-01
2-658-277-01
2-658-278-01
PANEL BOARD, COMPLETE (RG590: MX)
PANEL BOARD, COMPLETE (RG490: MX)
CUSHION (FOOT)
RING (SUB WOOFER) (RG490/RG590: UK)
KEY (SUB WOOFER) (RG490/RG590: UK)
79
HCD-RG490/RG590
8-3.
LID (TOP) SECTION
(RG490/RG590: UK)
(RG590: E2, E3, E51, MX, AR)
110
108
108
not supplied
108
107
112
111
109
108
108
not supplied
108
#1
not supplied
106
104
front panel section
101
Ref. No.
101
102
102
103
104
Part No.
103
105
102
Description
Remark
2-658-285-01 REFLECTOR (VOL)
X-2109-226-1 RING (VOL) ASSY (SERVICE)
(RG590: E2, E3, E51, MX, AR)
X-2109-227-1 RING (VOL) ASSY (SERVICE)
(RG490/RG590: UK)
2-658-284-01 GUIDE (VOL LED)
2-658-286-01 KEY (CENTER L)
(u, l TUNING –, m
–)
Ref. No.
108
109
110
111
112
105
106
106
106
107
80
2-658-287-01 KEY (CENTER R)
(x, L TUNING +, M
+)
2-658-283-71 WINDOW (DISPLAY) (RG490)
2-658-283-81 WINDOW (DISPLAY) (RG590: UK)
2-658-283-91 WINDOW (DISPLAY)
(RG590: E2, E3, E51, MX, AR)
X-2109-229-1 LID (TOP B) ASSY (SERVICE)
(RG490/RG590: UK)
112
#1
Part No.
Description
Remark
4-951-620-01 SCREW (2.6X8), +BVTP
2-658-302-01 KEY (SELECT) (+ < , –)
(RG590: E2, E3, E51, MX, AR)
X-2109-228-1 LID (TOP A) ASSY (SERVICE)
(RG590: E2, E3, E51, MX, AR)
X-2109-231-1 KEY (P-EQ) ASSY (SERVICE)
(PRESET EQ, BASS, VOCAL, GUITAR)
(RG590: E2, E3, E51, MX, AR)
A-1159-684-A KEY TOP BOARD, COMPLETE
(RG590: E2, E3, E51, AR)
A-1159-685-A KEY TOP BOARD, COMPLETE (RG590: MX)
7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S
HCD-RG490/RG590
8-4.
FRONT PANEL SECTION
158
(RG490: MX/
RG590: MX)
not supplied
not supplied
not supplied
170
171
169
169
not
supplied
155
156
159
not supplied
156
159
159
157
not supplied
160
159
161 not supplied
162
154
167
168
163
153
164
159
165
152
166
(RG490: MX/
RG590: MX)
162
(RG490: E2, E51, MX/
RG590: E2, E51, MX, AR)
(RG490: MX/RG590: MX)
Ref. No.
151
152
153
154
155
155
156
157
157
157
157
157
Part No.
Description
151
159
(RG490: E2, E51, MX/
RG590: E2, E51, MX, AR)
151
Remark
2-638-220-01 KNOB (MIC)
(RG490: E2, E51, MX/RG590: E2, E51, MX, AR)
2-658-304-01 SPRING (CASS R)
2-658-271-01 BOX, CASSETTE (R)
2-658-303-01 SPRING (CASS L)
2-658-270-01 BOX, CASSETTE (L) (RG490: E2, E51, MX/
RG590: E2, E51, MX, AR)
2-658-270-11 BOX, CASSETTE (L)
(RG490: E3/RG590: UK, E3)
4-238-631-11 TAPE SPRING
X-2109-217-1 PANEL (SERVICE) ASSY, FRONT
(RG490: E3/RG590: UK)
X-2109-218-1 PANEL (SERVICE) ASSY, FRONT
(RG490: E2, E51)
X-2109-219-1 PANEL (SERVICE) ASSY, FRONT (RG490: MX)
157
158
159
X-2109-220-1 PANEL (SERVICE) ASSY, FRONT (RG590: E3)
X-2109-221-1 PANEL (SERVICE) ASSY, FRONT
(RG590: E2, E51, AR)
X-2109-222-1 PANEL (SERVICE) ASSY, FRONT (RG590: MX)
1-417-656-21 MECHA DECK (CWN42FF609)
4-951-620-01 SCREW (2.6X8), +BVTP
160
4-231-825-01 CAM (B), HEART
Ref. No.
Part No.
Description
161
162
163
164
4-231-841-01
4-224-104-41
4-231-836-01
4-231-824-01
SPRING (HEART CAM-B)
DAMPER
SPRING (HEART CAM-A)
CAM (A), HEART
165
2-658-272-01 HOLDER (MIC 1) (RG490: E2, E51, MX/
RG590: E2, E51, MX, AR)
2-658-273-01 HOLDER (MIC 2) (RG490: MX/RG590: MX)
A-1159-739-A MIC. AUX. HP BOARD, COMPLETE
(RG490: E3/RG590: UK, E3)
A-1159-740-A MIC. AUX. HP BOARD, COMPLETE
(RG490: E2, E51/RG590: E2, E51, AR)
A-1159-741-A MIC. AUX. HP BOARD, COMPLETE
(RG490: MX/RG590: MX)
166
167
167
167
168
168
169
170
171
Remark
1-831-772-21 CABLE, FLEXIBLE FLAT (9 CORE)
(RG490: E3/RG590: UK, E3)
1-831-789-21 CABLE, FLEXIBLE FLAT (13 CORE)
(RG490: E2, E51, MX/
RG590: E2, E51, MX, AR)
4-235-777-01 BELT (FR)
2-683-559-01 BELT (AF)
4-683-560-01 BELT (BF)
81
HCD-RG490/RG590
8-5.
MAIN BOARD SECTION
201
202
202
#2
(RG490: MX/RG590: MX)
not supplied
not supplied
(VIDEO-OUT board)
203
202
M001
202
POWER board,
SUB WOOFER board section
202
204
not supplied
(SW-SP board)
202
(RG590: UK)
209
210
205
208
206
#1
chassis section
#1
207
Ref. No.
201
201
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
207
207
A-1159-747-A MAIN BOARD, COMPLETE (RG590: MX)
A-1163-193-A MAIN BOARD, COMPLETE (RG490: E3)
201
202
203
2-658-298-51 PANEL, BACK (RG590: UK, AR)
2-658-298-61 PANEL, BACK
(RG490: E2, E3, E51/RG590: E2, E3, E51)
2-658-298-71 PANEL, BACK (RG490: MX/RG590: MX)
3-254-143-11 SCREW (B3), (+) BV TAPPING
3-252-829-01 SCREW (B3), (+) BV TAPPING
207
207
208
204
204
205
205
1-693-711-11
1-693-712-11
1-831-619-21
1-831-769-21
208
209
A-1163-195-A MAIN BOARD, COMPLETE (RG490: E2, E51)
A-1163-196-A MAIN BOARD, COMPLETE (RG490: MX)
1-831-771-21 CABLE, FLEXIBLE FLAT (23 CORE) (RG490: E2,
E3, E51/RG590: UK, E2, E3, E51, AR)
1-832-043-21 CABLE, FLEXIBLE FLAT (31 CORE)
(RG490: MX/RG590: MX)
3-077-331-01 +BV3 (3-CR)
210
M001
#1
#2
2-666-281-01
1-787-344-11
7-685-646-79
7-685-881-09
206
207
207
207
82
TUNER (FM/AM) (EXCEPT RG590: UK)
TUNER (FM/AM) (RG590: UK)
CABLE, FLEXIBLE FLAT (11 CORE) (RG590: UK)
CABLE, FLEXIBLE FLAT (9 CORE)
(EXCEPT RG590: UK)
1-831-786-21 CABLE, FLEXIBLE FLAT (13 CORE)
A-1159-743-A MAIN BOARD, COMPLETE (RG590: UK)
A-1159-744-A MAIN BOARD, COMPLETE (RG590: E3)
A-1159-746-A MAIN BOARD, COMPLETE
(RG590: E2, E51, AR)
SHEET (GROUND REAR) (RG590: UK)
FAN, DC
SCREW +BVTP 3X8 TYPE2 N-S
SCREW +BVTT 4X8 (S)
HCD-RG490/RG590
8-6.
POWER BOARD, SUB WOOFER BOARD SECTION
#1
#1
not supplied
254
252
not supplied
not supplied
#1
253
#1
253
251
252
#1
not supplied
#1
not supplied
Ref. No.
251
251
251
251
251
Part No.
Description
Remark
A-1159-779-A POWER BOARD, COMPLETE (RG590: UK)
A-1159-780-A POWER BOARD, COMPLETE (RG590: E3)
A-1159-781-A POWER BOARD, COMPLETE
(RG590: E2, E51, MX, AR)
A-1163-225-A POWER BOARD, COMPLETE (RG490: E3)
A-1163-226-A POWER BOARD, COMPLETE
(RG490: E2, E51, MX)
Ref. No.
252
253
254
254
#1
Part No.
Description
3-905-609-31
3-254-143-11
A-1159-815-A
A-1178-854-A
7-685-646-79
SCREW (TRANSISTOR)
SCREW (B3), (+) BV TAPPING
SUB WOOFER BOARD, COMPLETE (RG590)
SUB WOOFER BOARD, COMPLETE (RG490)
SCREW +BVTP 3X8 TYPE2 N-S
Remark
83
HCD-RG490/RG590
8-7.
CHASSIS SECTION
(RG490)
(MX)
308
not supplied
307
304
309
PT901
306
F907
F904
F905
F906
(RG590)
(MX)
308
F909
not supplied
305
not
supplied
not supplied
F905
302
#1
307
309
302
303
F907
Ref. No.
301
302
303
304
305
* 305
0 306
0 306
0 306
0 306
307
307
307
307
307
84
not supplied
F904
F906
F908
301
Part No.
Description
Remark
A-1171-482-A
3-077-331-01
1-831-928-21
4-900-386-01
3-703-244-00
DECK BOARD, COMPLETE
+BV3 (3-CR)
CABLE, FLEXIBLE FLAT (11 CORE)
SCREW
BUSHING (2104), CORD
(RG490: E51/RG590: UK, E51, AR)
3-703-571-12 BUSHING (S) (4516), CORD
(RG490: E2, E3, MX/RG590: E2, E3, MX)
1-769-744-81 CORD, POWER (RG590: UK)
1-827-226-31 CORD, POWER
(RG490: E2, E3, MX/RG590: E2, E3, MX)
1-829-387-11 CORD, POWER (RG590: AR)
1-830-188-11 CORD, POWER (RG490: E51/RG590: E51)
A-1159-798-A TRANSFORMER BOARD, COMPLETE
(RG590: UK)
A-1159-799-A TRANSFORMER BOARD, COMPLETE
(RG590: E2, E3, E51)
A-1159-802-A TRANSFORMER BOARD, COMPLETE
(RG590: AR)
A-1159-803-A TRANSFORMER BOARD, COMPLETE
(RG590: MX)
A-1163-243-A TRANSFORMER BOARD, COMPLETE
(RG490: E2, E3, E51)
Ref. No.
307
308
309
0 F904
0 F904
0 F905
0 F905
0 F906
0 F907
0 F908
0 F909
0 PT901
0 PT901
0 PT901
0 PT901
0 PT901
Part No.
Description
Remark
A-1163-247-A TRANSFORMER BOARD, COMPLETE
(RG490: MX)
3-701-748-00 CLAMP (RG490: MX/RG590: MX)
1-500-868-11 CORE, FERRITE (RG490: MX/RG590: MX)
1-532-506-33 FUSE (T6.3AL/250V) (RG590)
1-533-949-33 FUSE, CYLINDRICAL (TIME LUG) (T8AL/250V)
(RG490)
1-532-506-33 FUSE (T6.3AL/250V) (RG590)
1-533-949-33 FUSE, CYLINDRICAL (TIME LUG) (T8AL/250V)
(RG490)
1-532-465-33 FUSE (T3.15AL/250V)
1-532-465-33 FUSE (T3.15AL/250V)
1-533-949-33 FUSE, CYLINDRICAL (TIME LUG) (T8AL/250V)
(RG590)
1-533-949-33 FUSE, CYLINDRICAL (TIME LUG) (T8AL/250V)
(RG590)
1-443-922-11 TRANSFORMER, POWER (RG590: UK)
1-443-932-11 TRANSFORMER, POWER (RG490: MX)
1-443-933-11 TRANSFORMER, POWER (RG590: MX)
1-443-935-11 TRANSFORMER, POWER
(RG590: E2, E3, E51, AR)
1-443-937-11 TRANSFORMER, POWER (RG490: E2, E3, E51)
HCD-RG490/RG590
8-8.
CD MECHANISM DECK SECTION-1
(CDM74KF-K6BD83S) (EXCEPT Mexican model)/
(CDM74KF-F1BD84) (Mexican model)
506
512
508
501
506
507
506
507
513
509
508
511
514
514
515
510
505
505
M741
502
504
503
516
CD mechanism deck section-2
501
Ref. No.
Part No.
Description
501
502
503
504
505
4-218-253-62
1-828-938-51
1-687-134-12
4-243-815-11
4-245-571-02
SCREW (M2.6), +BTTP
WIRE (FLAT TYPE) (5 CORE)
MOTOR (TB) BOARD
TABLE (LOADING)
GEAR (STOPPER)
506
507
508
509
4-218-252-61
4-245-570-01
4-245-572-01
1-687-132-12
SCREW (+PTPWH M2.6), FLOATING
GEAR (JOINT)
BUSHING (GEAR)
SENSOR BOARD
Remark
Ref. No.
Part No.
Description
510
4-243-820-01 GEAR (TABLE)
511
512
513
514
515
4-243-819-01
4-243-816-11
4-243-823-11
4-985-672-01
4-243-821-01
516
M741
3-231-598-01 SHEET (BA)
A-1108-965-A MOTOR ASSY, TABLE
Remark
GEAR (GENEVA)
TRAY
BELT (TABLE)
SCREW (+PTPWH M2.6), FLOATING
PULLEY (TABLE)
85
HCD-RG490/RG590
8-9.
CD MECHANISM DECK SECTION-2
(CDM74KF-K6BD83S) (EXCEPT Mexican model)/
(CDM74KF-F1BD84) (Mexican model)
555
562
563
555
566
564
561
567
555
565
560
581
569
570
S711
552
558
572
579
555
572
572
M751
580
573
557
573
572
553
556
573
568
552
551
555
555
552
576
578
S101
554
(MX)
not supplied
Ref. No.
Part No.
Description
551
552
553
554
555
A-1103-756-B
4-218-253-52
1-687-669-12
4-244-034-11
4-985-672-01
DRIVER BOARD, COMPLETE
SCREW (M2.6), +BTTP
SW BOARD
BELT (LOADING)
SCREW (+PTPWH M2.6), FLOATING
556
557
558
559
560
4-225-844-01
4-224-613-11
1-687-133-12
3-087-053-01
4-244-108-01
GEAR (LOADING A)
GEAR (SHAFT)
MOTOR (LD) BOARD
+BVTP2.6 (3CR) (MX)
GEAR, SWING
561
562
563
564
565
4-224-609-01
4-224-608-01
3-016-533-11
4-224-611-01
4-224-606-01
GEAR (LOADING C)
COLLAR, SWING
WASHER (FR), STOPPER
GEAR (LOADING B)
GEAR (RV)
566
567
568
4-243-818-01 GEAR (U/D)
4-243-822-02 LEVER (LIFTER)
X-2102-809-1 PULLEY (KH) ASSY
Remark
Ref. No.
Part No.
4-231-189-01 PULLEY (B), CHUCKING
X-2055-190-1 HOLDER (213) ASSY
572
573
576
578
578
4-227-549-11
4-227-045-31
1-832-404-21
A-1095-982-A
A-1134-279-A
0 579
580
581
M751
S101
S711
559
Description
569
570
0 579
86
555
573
Remark
INSULATOR
SPRING (INSULATOR), COIL
CABLE, FLEXIBLE FLAT (16 CORE)
BD BOARD, COMPLETE (MX)
CD BOARD, COMPLETE (EXCEPT MX)
8-820-244-01 OPTICAL PICK-UP BLOCK
(KSM-215DCP/C2NP) (MX)
A-4735-357-A OPTICAL PICK-UP BLOCK (KSM-213D)
(EXCEPT MX)
1-471-035-21 MAGNET ASSY
4-243-817-22 CHASSIS
A-1108-966-A MOTOR ASSY, LOADING
1-771-853-11 SWITCH, DETECTION (LIMIT)
1-477-680-12 ENCODER, ROTARY
(DISC TABLE ADDRESS DETECT)
HCD-RG490/RG590
SECTION 9
ELECTRICAL PARTS LIST
BD
NOTE:
• Items marked “*” are not stocked since they
• Due to standardization, replacements in the
are seldom required for routine service.
parts list may be different from the parts
Some delay should be anticipated when
specified in the diagrams or the components
ordering these items.
used on the set.
• SEMICONDUCTORS
• -XX and -X mean standardized parts, so they
In each case, u: µ, for example:
may have some difference from the original
uA... : µA...
uPA... : µPA...
one.
uPB... : µPB...
uPC... : µPC...
• RESISTORS
uPD... : µPD...
All resistors are in ohms.
• CAPACITORS
METAL: Metal-film resistor.
uF: µF
METAL OXIDE: Metal oxide-film resistor.
• COILS
F: nonflammable
uH: µH
• Abbreviation
AR : Argentina model
E2 : 120V AC area in E model E51 : Chilean and Peruvian models
E3 : 240V AC area in E model MX : Mexican model
Ref. No.
Part No.
Description
Remark
A-1095-982-A BD BOARD, COMPLETE
(RG490: MX/RG590: MX)
*******************
< CAPACITOR >
C10
C11
C14
C15
C16
1-165-989-11
1-165-989-11
1-164-360-11
1-164-360-11
1-115-156-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
10uF
0.1uF
0.1uF
1uF
10%
10%
C17
C18
C111
C112
C113
1-126-246-11
1-162-964-11
1-162-967-11
1-162-962-11
1-162-967-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
220uF
0.001uF
0.0033uF
470PF
0.0033uF
20%
10%
10%
10%
10%
4V
50V
50V
50V
50V
C114
C115
C116
C122
C123
1-162-962-11
1-164-360-11
1-128-995-21
1-107-826-11
1-107-826-11
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
470PF
0.1uF
100uF
0.1uF
0.1uF
10%
50V
16V
10V
16V
16V
C124
C125
C131
C132
C133
1-162-959-11
1-164-360-11
1-162-927-11
1-117-863-11
1-162-970-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
330PF
0.1uF
100PF
0.47uF
0.01uF
5%
10%
10%
50V
16V
50V
6.3V
25V
C134
C141
C142
C143
C151
1-164-360-11
1-107-826-11
1-162-965-11
1-164-360-11
1-128-995-21
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
0.1uF
0.1uF
10%
0.0015uF 10%
0.1uF
100uF
20%
16V
16V
50V
16V
10V
C161
C162
C163
C171
C172
1-164-360-11
1-164-360-11
1-164-360-11
1-162-919-11
1-162-920-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
22PF
27PF
5%
5%
16V
16V
16V
50V
50V
C174
C181
C182
C183
C184
1-164-360-11
1-164-360-11
1-164-360-11
1-124-778-00
1-124-778-00
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
0.1uF
0.1uF
0.1uF
22uF
22uF
20%
20%
16V
16V
16V
6.3V
6.3V
C185
C186
C194
C195
1-162-962-11
1-162-962-11
1-164-360-11
1-164-360-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
470PF
470PF
0.1uF
0.1uF
20%
10%
10%
5%
6.3V
6.3V
16V
16V
10V
Ref. No.
50V
50V
16V
16V
When indicating parts by reference
number, please include the board.
Description
Remark
C196
1-164-360-11 CERAMIC CHIP
0.1uF
C201
C203
C209
C210
C211
1-128-995-21
1-128-995-21
1-162-970-11
1-107-826-11
1-164-230-11
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100uF
100uF
0.01uF
0.1uF
220PF
20%
20%
10%
10%
5%
10V
10V
25V
16V
50V
C212
C213
C251
C252
C255
1-162-919-11
1-162-919-11
1-162-969-11
1-164-360-11
1-164-360-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
22PF
5%
22PF
5%
0.0068uF 10%
0.1uF
0.1uF
50V
50V
25V
16V
16V
C257
C258
C259
C260
C302
1-164-360-11
1-164-360-11
1-164-360-11
1-128-394-11
1-164-360-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
220uF
0.1uF
16V
16V
16V
10V
16V
C303
C305
C306
C307
C308
1-164-360-11
1-126-246-11
1-164-360-11
1-164-360-11
1-126-208-21
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
0.1uF
220uF
0.1uF
0.1uF
47uF
C309
C310
C311
C312
C313
1-164-360-11
1-164-360-11
1-164-360-11
1-164-360-11
1-164-360-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
C314
C315
C316
C317
C318
1-126-208-21
1-107-826-11
1-162-966-11
1-162-970-11
1-162-970-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
0.1uF
0.0022uF
0.01uF
0.01uF
20%
10%
10%
10%
10%
4V
16V
50V
25V
25V
C320
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
16V
20%
20%
20%
16V
4V
16V
16V
4V
16V
16V
16V
16V
16V
< CONNECTOR >
CN101
CN201
1-770-425-51 CONNECTOR, FFC/FPC 16P
1-784-879-51 CONNECTOR, FFC (LIF (NON-ZIF)) 31P
< FERRITE BEAD >
FB301
10%
10%
Part No.
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
1-500-445-21 FERRITE, EMI (SMD) (2012)
< IC >
IC101
8-752-425-12 IC CXD3059AR
87
HCD-RG490/RG590
BD
Ref. No.
IC251
IC301
IC303
CD
Part No.
Description
Remark
6-705-808-01 IC BA5947FM-E2
6-705-365-01 IC TC94A34FG-002
6-705-807-01 IC BH15FB1WG
< TRANSISTOR >
Q10
6-551-120-01 TRANSISTOR
Part No.
Description
Remark
R407
R408
R409
R410
R411
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R412
R419
R421
R422
R423
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
2SA2119K
< RESISTOR/FERRITE BEAD >
R10
R11
R12
R13
R111
1-216-791-11
1-216-864-11
1-216-845-11
1-218-446-11
1-216-821-11
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
3.3
0
100K
1
1K
5%
1/10W
5%
5%
5%
1/10W
1/10W
1/10W
R112
R113
R114
R121
R131
1-216-835-11
1-216-821-11
1-216-835-11
1-216-835-11
1-216-857-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
15K
1K
15K
15K
1M
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R132
R133
R141
R142
R143
1-216-833-11
1-216-848-11
1-216-829-11
1-216-821-11
1-216-827-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
180K
4.7K
1K
3.3K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R151
R161
R162
R163
R165
1-216-864-11
1-216-809-11
1-216-841-11
1-216-809-11
1-216-864-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
0
100
47K
100
0
5%
5%
5%
1/10W
1/10W
1/10W
R171
R172
R173
R181
R182
1-216-817-11
1-216-857-11
1-216-295-00
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
470
1M
0
100
100
5%
5%
1/10W
1/10W
5%
5%
1/10W
1/10W
R191
R201
R203
R204
R205
1-216-864-11
1-500-445-21
1-216-864-11
1-216-864-11
1-216-864-11
SHORT CHIP
0
FERRITE, EMI (SMD) (2012)
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
R251
R252
R253
R301
R302
1-216-833-11
1-216-837-11
1-216-833-11
1-216-845-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
22K
10K
100K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R303
R305
R306
R307
R313
1-216-845-11
1-216-845-11
1-216-864-11
1-216-833-11
1-216-813-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
100K
100K
0
10K
220
5%
5%
1/10W
1/10W
5%
5%
1/10W
1/10W
R351
R352
R353
R354
R401
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R402
R403
R404
R405
R406
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
88
Ref. No.
< VIBRATOR >
X171
1-767-408-21 VIBRATOR, CRYSTAL (16.9344MHz)
************************************************************
A-1134-279-A CD BOARD, COMPLETE
(EXCEPT RG490: MX/RG590: MX)
*******************
< CAPACITOR >
C101
C102
C103
C104
C105
1-162-919-11
1-162-919-11
1-162-919-11
1-164-230-11
1-162-919-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
22PF
22PF
22PF
220PF
22PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C107
C108
C109
C110
C111
1-164-230-11
1-164-230-11
1-164-230-11
1-164-230-11
1-164-230-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
220PF
220PF
220PF
220PF
220PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C112
C113
C201
C202
C203
1-162-919-11
1-162-919-11
1-128-995-21
1-164-360-11
1-128-995-21
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
ELECT CHIP
22PF
22PF
100uF
0.1uF
100uF
5%
5%
20%
50V
50V
10V
16V
10V
C204
C205
C206
C207
C208
1-164-360-11
1-164-360-11
1-164-360-11
1-128-995-21
1-164-360-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
100uF
0.1uF
C210
C213
C214
C215
C217
1-164-360-11
1-164-360-11
1-164-360-11
1-164-360-11
1-164-360-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
16V
16V
16V
16V
16V
C218
C219
C220
C221
C222
1-164-360-11
1-164-360-11
1-164-360-11
1-164-360-11
1-164-360-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
16V
16V
16V
16V
16V
C223
C224
C226
C227
C230
1-164-360-11
1-164-360-11
1-165-908-11
1-165-908-11
1-162-927-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
1uF
1uF
100PF
10%
10%
5%
16V
16V
10V
10V
50V
C232
C251
C252
1-164-360-11 CERAMIC CHIP
1-164-315-11 CERAMIC CHIP
1-162-968-11 CERAMIC CHIP
0.1uF
470PF
5%
0.0047uF 10%
16V
50V
50V
20%
20%
16V
16V
16V
10V
16V
HCD-RG490/RG590
CD
Ref. No.
Part No.
Description
Remark
C253
C254
1-164-315-11 CERAMIC CHIP
1-162-968-11 CERAMIC CHIP
470PF
5%
0.0047uF 10%
50V
50V
C256
C257
C258
C260
C261
1-107-826-11
1-107-826-11
1-164-230-11
1-117-863-11
1-162-970-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
220PF
0.47uF
0.01uF
10%
10%
5%
10%
10%
16V
16V
50V
6.3V
25V
C264
C265
C266
C267
C268
1-162-964-11
1-107-826-11
1-162-915-11
1-162-910-11
1-162-915-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.1uF
10PF
5PF
10PF
10%
10%
0.5PF
0.25PF
0.5PF
50V
16V
50V
50V
50V
C271
C272
C273
C274
C275
1-107-826-11
1-164-360-11
1-164-315-11
1-107-826-11
1-162-910-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
470PF
0.1uF
5PF
10%
C276
C277
C291
C292
C301
1-165-908-11
1-165-908-11
1-164-315-11
1-164-315-11
1-164-360-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
470PF
470PF
0.1uF
10%
10%
5%
5%
C303
C304
C321
C322
C323
1-137-710-11
1-165-908-11
1-162-964-11
1-165-908-11
1-128-995-21
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
10uF
1uF
0.001uF
1uF
100uF
20%
10%
10%
10%
20%
6.3V
10V
50V
10V
10V
C401
C404
C405
C406
C424
1-128-394-11
1-164-360-11
1-164-360-11
1-164-360-11
1-164-360-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
220uF
0.1uF
0.1uF
0.1uF
0.1uF
20%
10V
16V
16V
16V
16V
C451
1-165-176-11 CERAMIC CHIP
0.047uF
10%
16V
16V
5%
50V
10%
16V
0.25PF 50V
10V
10V
50V
50V
16V
16V
< CONNECTOR >
CN102
CN301
1-770-706-21 CONNECTOR, FFC/FPC 23P
1-770-425-51 CONNECTOR, FFC/FPC 16P
Ref. No.
Part No.
Description
Remark
R112
R113
R201
R202
R203
1-216-809-11
1-216-809-11
1-216-295-00
1-216-295-00
1-500-445-21
METAL CHIP
100
5%
METAL CHIP
100
5%
SHORT CHIP
0
SHORT CHIP
0
FERRITE, EMI (SMD) (2012)
1/10W
1/10W
R207
R250
R252
R253
R254
1-216-295-00
1-216-857-11
1-216-833-11
1-216-821-11
1-216-833-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
1M
10K
1K
10K
R255
R256
R257
R258
R260
1-216-821-11
1-216-837-11
1-216-845-11
1-216-849-11
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
R265
R266
R267
R268
R270
1-216-829-11
1-216-821-11
1-216-829-11
1-216-833-11
1-216-821-11
R271
R275
R276
R277
R278
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1K
22K
100K
220K
0
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
1K
4.7K
10K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
1-216-857-11
1-216-809-11
1-216-841-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1M
100
47K
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R280
R291
R292
R321
R322
1-216-864-11
1-216-809-11
1-216-809-11
1-216-789-11
1-216-789-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
100
100
2.2
2.2
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
R323
R324
R401
R421
R423
1-216-864-11
1-216-845-11
1-216-295-00
1-216-864-11
1-216-833-11
SHORT CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
0
100K
0
0
10K
5%
1/10W
5%
1/10W
R451
R452
1-216-837-11 METAL CHIP
1-216-833-11 METAL CHIP
22K
10K
5%
5%
1/10W
1/10W
< IC >
IC201
IC203
IC402
< VIBRATOR >
8-753-246-30 IC CXD3014A-201R
6-709-050-01 IC BH18LB1WG-TR
6-705-808-01 IC BA5947FM-E2
X201
1-795-101-21 VIBRATOR, CERAMIC (16.9344MHz)
************************************************************
A-1159-964-A CD-G BOARD, COMPLETE
(RG490: MX/RG590: MX)
*********************
< TRANSISTOR >
Q321
6-551-120-01 TRANSISTOR
CD-G
2SA2119K
< CAPACITOR >
< RESISTOR/FERRITE BEAD >
R101
R102
R103
R104
R105
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R107
R108
R109
R110
R111
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C1001
C1002
C1003
C1004
C1005
1-162-970-11
1-162-970-11
1-162-970-11
1-162-970-11
1-162-970-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
0.01uF
0.01uF
0.01uF
10%
10%
10%
10%
10%
25V
25V
25V
25V
25V
C1006
C1007
C1008
C1010
C1011
1-162-970-11
1-162-970-11
1-126-193-11
1-126-206-11
1-162-970-11
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
0.01uF
0.01uF
1uF
100uF
0.01uF
10%
10%
20%
20%
10%
25V
25V
50V
6.3V
25V
89
HCD-RG490/RG590
CD-G
Ref. No.
DECK
Part No.
Description
C1012
C1013
C1014
C1015
C1016
1-126-205-11
1-126-206-11
1-162-970-11
1-162-970-11
1-216-864-11
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
SHORT CHIP
47uF
100uF
0.01uF
0.01uF
0
20%
20%
10%
10%
6.3V
6.3V
25V
25V
Remark
C1018
C1019
C1022
C1023
C1024
1-162-919-11
1-162-919-11
1-162-919-11
1-126-193-11
1-126-206-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
22PF
22PF
22PF
1uF
100uF
5%
5%
5%
20%
20%
50V
50V
50V
50V
6.3V
C1025
C1026
C1027
C1028
C1029
1-162-970-11
1-110-530-11
1-162-957-11
1-126-206-11
1-164-357-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
0.01uF
1000uF
220PF
100uF
0.001uF
10%
20%
5%
20%
5%
25V
6.3V
50V
6.3V
50V
C1030
C1031
1-124-778-00 ELECT CHIP
1-126-193-11 ELECT CHIP
22uF
1uF
20%
20%
6.3V
50V
< CONNECTOR >
Ref. No.
Part No.
Description
Remark
R1020
R1021
R1022
R1023
R1029
1-216-833-11
1-216-813-11
1-216-813-11
1-216-813-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
220
220
220
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R1030
R1031
R1032
R1033
R1034
1-216-837-11
1-218-285-11
1-216-833-11
1-216-825-11
1-216-825-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22K
75
10K
2.2K
2.2K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R1035
R1036
R1037
R1038
R1051
1-216-825-11
1-162-968-11
1-162-966-11
1-162-962-11
1-216-797-11
METAL CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
METAL CHIP
2.2K
0.0047uF
0.0022uF
470PF
10
5%
10%
10%
10%
5%
1/10W
50V
50V
50V
1/10W
< VIBRATOR >
X1002 1-813-555-11 VIBRATOR, CRYSTAL (14.31818MHz)
************************************************************
CN1001 1-779-416-11 CONNECTOR, FFC (LIF (NON-ZIF)) 13P
CN1004 1-794-509-41 PIN, CONNECTOR (PC BOARD) (3P)
A-1171-482-A DECK BOARD, COMPLETE
*********************
< JUMPER RESISTOR >
< CAPACITOR >
FB1001 1-216-864-11 SHORT CHIP
0
< IC >
IC1001
IC1002
IC1003
IC1005
IC1006
6-707-420-01
6-704-474-01
6-705-469-01
8-759-584-98
6-706-369-01
IC
IC
IC
IC
IC
TC9411AFG (BS, K)
MSM514400E-60TS-K
BA50BC0FP-E2
SN74AHCT04NSR
NJM2561F1-TE2
< RESISTOR >
JR1001 1-216-864-11 SHORT CHIP
L1001 1-216-864-11 SHORT CHIP
L1002 1-216-797-11 METAL CHIP
0
0
10
5%
1/10W
< TRANSISTOR >
Q1001
Q1002
Q1005
Q1006
Q1007
8-729-027-59
8-729-027-59
8-729-027-59
8-729-027-23
8-729-027-59
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
DTC144EKA-T146
DTC144EKA-T146
DTC144EKA-T146
DTA114EKA-T146
DTC144EKA-T146
Q1008
Q1009
Q1010
8-729-804-41 TRANSISTOR
8-729-027-23 TRANSISTOR
8-729-027-59 TRANSISTOR
2SB1122-S
DTA114EKA-T146
DTC144EKA-T146
< RESISTOR >
R1003
R1004
R1005
R1006
R1011
1-216-829-11
1-216-825-11
1-216-825-11
1-216-829-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
2.2K
2.2K
4.7K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R1012
R1013
R1015
R1016
R1017
1-216-833-11
1-216-825-11
1-216-809-11
1-216-833-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
2.2K
100
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
90
C301
C302
C303
C304
C307
1-162-964-11
1-162-964-11
1-162-964-11
1-162-964-11
1-162-970-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.001uF
0.001uF
0.001uF
0.01uF
10%
10%
10%
10%
10%
50V
50V
50V
50V
25V
C315
C316
C317
C318
C323
1-162-923-11
1-162-923-11
1-126-964-11
1-126-964-11
1-162-968-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
47PF
47PF
10uF
10uF
0.0047uF
5%
5%
20%
20%
10%
50V
50V
50V
50V
50V
C324
C325
C326
C327
C328
1-162-968-11
1-162-966-11
1-162-966-11
1-162-960-11
1-162-960-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0047uF
0.0022uF
0.0022uF
220PF
220PF
10%
10%
10%
10%
10%
50V
50V
50V
50V
50V
C329
C330
C350
C351
C352
1-136-161-00
1-136-161-00
1-126-934-11
1-126-934-11
1-107-826-11
MYLAR
MYLAR
ELECT
ELECT
CERAMIC CHIP
0.047uF
0.047uF
220uF
220uF
0.1uF
5%
5%
20%
20%
10%
50V
50V
16V
16V
16V
C353
C354
C355
C356
C401
1-107-826-11
1-107-826-11
1-162-970-11
1-126-964-11
1-126-956-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
0.1uF
0.1uF
0.01uF
10uF
0.1uF
10%
10%
10%
20%
20%
16V
16V
25V
50V
50V
C402
C403
C404
C405
C406
1-126-956-11
1-162-923-11
1-162-923-11
1-162-960-11
1-162-960-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
47PF
47PF
220PF
220PF
20%
5%
5%
10%
10%
50V
50V
50V
50V
50V
C409
C410
C411
C412
1-126-964-11
1-126-964-11
1-162-915-11
1-162-915-11
ELECT
ELECT
CERAMIC CHIP
CERAMIC CHIP
10uF
10uF
10PF
10PF
20%
20%
0.5PF
0.5PF
50V
50V
50V
50V
HCD-RG490/RG590
DECK
Ref. No.
Part No.
Description
Remark
C413
1-162-960-11 CERAMIC CHIP
220PF
10%
50V
C414
C415
C416
C417
C418
1-162-960-11
1-162-968-11
1-162-968-11
1-107-726-91
1-107-726-91
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
220PF
0.0047uF
0.0047uF
0.01uF
0.01uF
10%
10%
10%
10%
10%
50V
50V
50V
16V
16V
C430
C431
C433
C452
C453
1-164-156-11
1-164-156-11
1-162-970-11
1-126-947-11
1-130-471-00
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
MYLAR
0.1uF
0.1uF
0.01uF
47uF
0.001uF
10%
20%
5%
25V
25V
25V
35V
50V
C454
C456
C458
C461
C462
1-130-479-00
1-130-483-00
1-130-475-00
1-162-962-11
1-162-962-11
MYLAR
MYLAR
MYLAR
CERAMIC CHIP
CERAMIC CHIP
0.0047uF
0.01uF
0.0022uF
470PF
470PF
5%
5%
5%
10%
10%
50V
50V
50V
50V
50V
< CONNECTOR >
CN008
CN301
CN302
1-568-830-11 CONNECTOR, FFC 11P
1-815-444-11 PIN, CONNECTOR (PWB) 3P
1-815-449-11 PIN, CONNECTOR (PWB) 8P
< DIODE >
D301
D401
6-501-165-01 DIODE UDZW-TE17-4.3B
6-500-335-01 DIODE MC2838-T112-1
Ref. No.
Part No.
Description
Q404
Q405
Q406
Q407
Q408
8-729-600-22
8-729-120-28
8-729-600-22
8-729-600-22
8-729-600-22
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SA1235-F
2SC1623-L5L6
2SA1235-F
2SA1235-F
2SA1235-F
Remark
Q409
Q410
Q451
Q452
Q453
6-551-276-01
6-551-276-01
8-729-037-13
8-729-120-28
8-729-011-92
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
RT1N431C-TP-1
RT1N431C-TP-1
KTA1271Y
2SC1623-L5L6
2SC2001TP-K1K2
< RESISTOR >
R301
R302
R303
R304
R305
1-216-841-11
1-216-841-11
1-216-841-11
1-216-841-11
1-216-849-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
47K
47K
47K
47K
220K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R306
R307
R308
R309
R310
1-216-849-11
1-216-829-11
1-216-829-11
1-216-817-11
1-216-817-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220K
4.7K
4.7K
470
470
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R311
R312
R313
R314
R315
1-216-813-11
1-216-813-11
1-216-805-11
1-216-805-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220
220
47
47
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R316
R317
R318
R319
R320
1-216-809-11
1-216-853-11
1-216-853-11
1-216-837-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
470K
470K
22K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R323
R324
R325
R326
R349
1-216-829-11
1-216-829-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
4.7K
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R350
R351
R401
R402
R403
1-216-864-11
1-216-821-11
1-216-841-11
1-216-841-11
1-216-837-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
1K
47K
47K
22K
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
R404
R405
R406
R407
R408
1-216-837-11
1-216-841-11
1-216-841-11
1-216-829-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22K
47K
47K
4.7K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R409
R410
R411
R412
R413
1-216-845-11
1-216-845-11
1-216-853-11
1-216-853-11
1-216-849-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
470K
470K
220K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R414
R415
R416
R423
R424
1-216-849-11
1-216-825-11
1-216-825-11
1-216-841-11
1-216-841-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220K
2.2K
2.2K
47K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R427
1-216-864-11 SHORT CHIP
< JUMPER RESISTOR >
FB301
1-216-864-11 SHORT CHIP
0
< IC >
IC301
IC401
6-702-457-01 IC NJM14558M-TE2
8-759-909-71 IC BA4558F
< JUMPER RESISTOR >
JR301
JR302
JR306
JR307
JR310
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
JR311
JR402
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
0
0
< TRANSFORMER >
L451
1-443-760-11 TRANSFORMER, BIAS OSCILLATION
< TRANSISTOR >
Q301
Q302
Q303
Q304
Q305
6-550-290-01
6-550-290-01
6-550-290-01
6-550-290-01
8-729-120-28
FET
FET
FET
FET
TRANSISTOR
2SJ460-T
2SJ460-T
2SJ460-T
2SJ460-T
2SC1623-L5L6
Q306
Q400
Q401
Q402
Q403
8-729-120-28
8-729-045-62
8-729-045-62
8-729-045-62
8-729-600-22
TRANSISTOR
FET
FET
FET
TRANSISTOR
2SC1623-L5L6
2SK2158-T2B
2SK2158-T2B
2SK2158-T2B
2SA1235-F
0
91
HCD-RG490/RG590
DECK
Ref. No.
DRIVER
KEY LEFT
Part No.
Description
R428
R429
R430
R431
1-216-864-11
1-216-833-11
1-216-833-11
1-216-821-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
10K
10K
1K
Remark
5%
5%
5%
1/10W
1/10W
1/10W
R432
R433
R434
R435
R436
1-216-821-11
1-216-841-11
1-216-841-11
1-216-833-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
47K
47K
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R437
R438
R439
R440
R441
1-216-864-11
1-216-864-11
1-216-829-11
1-216-833-11
1-216-864-11
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
0
0
4.7K
10K
0
R442
R443
R444
R445
R446
1-216-841-11
1-216-833-11
1-216-845-11
1-216-864-11
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
R449
R450
R451
R452
R453
1-216-801-11
1-216-801-11
1-216-833-11
1-216-841-11
1-216-829-11
R454
R455
R456
R457
R458
Ref. No.
C752
1/10W
1/10W
47K
10K
100K
0
0
5%
5%
5%
1/10W
1/10W
1/10W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22
22
10K
47K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
1-216-829-11
1-216-797-11
1-216-801-11
1-216-837-11
1-216-793-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
10
22
22K
4.7
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R459
R460
R461
R462
R463
1-216-864-11
1-216-864-11
1-216-825-11
1-216-825-11
1-216-821-11
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
0
2.2K
2.2K
1K
5%
5%
5%
1/10W
1/10W
1/10W
R464
R465
R466
R481
R482
1-216-821-11
1-216-864-11
1-216-864-11
1-216-829-11
1-216-841-11
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
1K
0
0
4.7K
47K
5%
1/10W
5%
5%
1/10W
1/10W
R483
R484
R485
R488
R489
1-216-837-11
1-216-837-11
1-216-825-11
1-216-837-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22K
22K
2.2K
22K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
CN701
CN702
* CN703
CN704
50V
1-784-735-11
1-784-766-11
1-564-720-11
1-785-328-11
CONNECTOR, FFC 13P
CONNECTOR, FFC 5P
PIN, CONNECTOR (SMALL TYPE) 4P
PIN, CONNECTOR (LIGHT ANGRE) 2P
8-719-921-42 DIODE MTZJ-5.1A
8-719-109-69 DIODE RD3.6ESB2
< IC >
IC701
IC712
8-759-598-69 IC BA6956AN
8-759-598-69 IC BA6956AN
< TRANSISTOR >
8-729-029-66 TRANSISTOR
DTC114ESA
< RESISTOR >
R701
R702
R711
R712
R713
1-249-413-11
1-247-807-31
1-249-417-11
1-249-425-11
1-249-433-11
CARBON
CARBON
CARBON
CARBON
CARBON
470
100
1K
4.7K
22K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R721
R722
R723
R731
R732
1-249-425-11
1-249-425-11
1-249-425-11
1-247-807-31
1-249-429-11
CARBON
CARBON
CARBON
CARBON
CARBON
4.7K
4.7K
4.7K
100
10K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R733
1-249-417-11 CARBON
1K
5%
1/4W
R734
1-249-430-11 CARBON
12K
5%
1/4W
R736
1-249-412-11 CARBON
390
5%
1/4W
R751
1-249-425-11 CARBON
4.7K
5%
1/4W
************************************************************
A-1159-677-A KEY LEFT BOARD, COMPLETE
(RG490: E2, E3, E51/RG590: UK)
A-1159-678-A KEY LEFT BOARD, COMPLETE(RG590: E2, E51)
A-1159-679-A KEY LEFT BOARD, COMPLETE (RG590: MX)
A-1163-183-A KEY LEFT BOARD, COMPLETE (RG490: MX)
************************
< LED >
D611
D622
6-501-483-01 LED SLR-325VCT31P (STANDBY)
8-719-063-92 LED SLR325MC-M-T31-NP (SUBWOOFER)
(RG490/RG590: UK)
< RESISTOR >
A-1103-756-B DRIVER BOARD, COMPLETE
***********************
< CAPACITOR >
C715
C731
C735
C736
C737
1-126-933-11
1-126-964-11
1-164-159-21
1-164-159-21
1-164-159-21
ELECT
ELECT
CERAMIC
CERAMIC
CERAMIC
100uF
10uF
0.1uF
0.1uF
0.1uF
20%
20%
C741
C751
1-162-306-11 CERAMIC
1-162-306-11 CERAMIC
0.01uF
0.01uF
20%
20%
92
Remark
0.1uF
< DIODE >
Q731
R490
1-216-829-11 METAL CHIP
4.7K
5%
1/10W
************************************************************
Description
< CONNECTOR >
D701
D711
5%
5%
Part No.
1-164-159-21 CERAMIC
16V
50V
50V
50V
50V
16V
16V
R626
R639
1-216-821-11 METAL CHIP
1-216-821-11 METAL CHIP
1K
1K
R640
1-216-821-11 METAL CHIP
1K
R652
R653
1-216-825-11 METAL CHIP
1-216-825-11 METAL CHIP
2.2K
2.2K
R654
R655
R656
1-216-829-11 METAL CHIP
1-216-829-11 METAL CHIP
1-216-833-11 METAL CHIP
4.7K
4.7K
10K
5%
1/10W
5%
1/10W
(RG490/RG590: UK)
5%
1/10W
(RG490/RG590: UK)
5%
1/10W
5%
1/10W
5%
5%
5%
1/10W
1/10W
1/10W
HCD-RG490/RG590
KEY LEFT
Ref. No.
Part No.
Description
R675
R676
1-216-829-11 METAL CHIP
1-216-833-11 METAL CHIP
4.7K
10K
R677
R678
1-216-837-11 METAL CHIP
1-216-841-11 METAL CHIP
22K
47K
5%
5%
Ref. No.
S637
1-762-875-21 SWITCH, KEYBOARD (DISC 2)
S638
1-762-875-21 SWITCH, KEYBOARD (DISC 1)
S672
1-786-418-11 SWITCH, ROTARY (ENCODER) (MULTI JOG)
************************************************************
S603
S604
1-762-875-21 SWITCH, KEYBOARD (I/1)
1-762-875-21 SWITCH, KEYBOARD (DISPLAY)
(EXCEPT RG490: MX/RG590: MX)
1-762-875-21 SWITCH, KEYBOARD (KARAOKE)
(RG490: MX/RG590: MX)
1-762-875-21 SWITCH, KEYBOARD (AUDIO IN)
1-762-875-21 SWITCH, KEYBOARD (TAPE A/B)
S605
S606
S625
S626
S627
1-762-875-21
1-762-875-21
1-762-875-21
1-762-875-21
1-762-875-21
S602
SWITCH, KEYBOARD (TUNER/BAND)
SWITCH, KEYBOARD (CD)
SWITCH, KEYBOARD (ILLUMINATION)
SWITCH, KEYBOARD (REC PAUSE/START)
SWITCH, KEYBOARD (CD SYNC)
S628
1-762-875-21 SWITCH, KEYBOARD (SUBWOOFER)
(RG490/RG590: UK)
************************************************************
A-1159-681-A KEY RIGHT BOARD, COMPLETE
(EXCEPT RG490: MX/RG590: MX)
A-1159-682-A KEY RIGHT BOARD, COMPLETE
(RG490: MX/RG590: MX)
*************************
1-162-970-11 CERAMIC CHIP
1-162-970-11 CERAMIC CHIP
< LED >
D623
8-719-063-92 LED SLR325MC-M-T31-NP (SUBWOOFER)
< RESISTOR >
R658
R659
R664
R665
R666
1-216-821-11
1-216-821-11
1-216-829-11
1-216-829-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
4.7K
4.7K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R667
R668
R692
R693
R694
1-216-837-11
1-216-841-11
1-216-825-11
1-216-825-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22K
47K
2.2K
2.2K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R695
R696
R697
R698
1-216-829-11
1-216-833-11
1-216-837-11
1-216-841-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
10K
22K
47K
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
< SWITCH >
0.01uF
0.01uF
10%
10%
25V
25V
< RESISTOR >
R682
R683
R684
R685
R686
1-216-825-11
1-216-825-11
1-216-829-11
1-216-829-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
2.2K
4.7K
4.7K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R687
R688
1-216-837-11 METAL CHIP
1-216-841-11 METAL CHIP
22K
47K
5%
5%
1/10W
1/10W
< SWITCH >
S624
S631
S631
S632
S632
S633
S633
S634
S635
S636
Remark
A-1159-684-A KEY TOP BOARD, COMPLETE
(RG590: E2, E3, E51, AR)
A-1159-685-A KEY TOP BOARD, COMPLETE (RG590: MX)
***********************
< CAPACITOR >
C643
C644
Description
MAIN
Remark
< SWITCH >
S601
S602
KEY TOP
1/10W
1/10W
5%
1/10W
5%
1/10W
(RG490/RG590: UK)
Part No.
KEY RIGHT
S614
S615
S616
S617
S618
1-762-875-21
1-762-875-21
1-762-875-21
1-762-875-21
1-762-875-21
SWITCH, KEYBOARD (CLEAR)
SWITCH, KEYBOARD (GROOVE)
SWITCH, KEYBOARD (SURROUND)
SWITCH, KEYBOARD (EQ BAND)
SWITCH, KEYBOARD (SUBWOOFER)
S641
S642
S643
S644
S645
1-762-875-21
1-762-875-21
1-762-875-21
1-762-875-21
1-762-875-21
SWITCH, KEYBOARD (BASS)
SWITCH, KEYBOARD (VOCAL)
SWITCH, KEYBOARD (GUITAR)
SWITCH, KEYBOARD (ENTER)
SWITCH, KEYBOARD (B)
S646
1-762-875-21 SWITCH, KEYBOARD (+)
S647
1-762-875-21 SWITCH, KEYBOARD (b)
S648
1-762-875-21 SWITCH, KEYBOARD (–)
************************************************************
1-762-875-21 SWITCH, KEYBOARD (ENTER)
1-762-875-21 SWITCH, KEYBOARD (EQ BAND)
(RG490/RG590: UK)
1-762-875-21 SWITCH, KEYBOARD (SLEEP)
(EXCEPT RG490/RG590: UK)
1-762-875-21 SWITCH, KEYBOARD (SURRROUND)
(RG490/RG590: UK)
1-762-875-21 SWITCH, KEYBOARD (PLAY MODE/
TUNING MODE) (EXCEPT RG490/RG590: UK)
1-762-875-21 SWITCH, KEYBOARD (GROOVE)
(RG490/RG590: UK)
1-762-875-21 SWITCH, KEYBOARD (REPEAT)
(EXCEPT RG490/RG590: UK)
1-762-875-21 SWITCH, KEYBOARD (A)
1-762-875-21 SWITCH, KEYBOARD (DISC SKIP/EX-CHANGE)
1-762-875-21 SWITCH, KEYBOARD (DISC 3)
A-1159-743-A MAIN BOARD, COMPLETE (RG590: UK)
A-1159-744-A MAIN BOARD, COMPLETE (RG590: E3)
A-1159-746-A MAIN BOARD, COMPLETE
(RG590: E2, E51, AR)
A-1159-747-A MAIN BOARD, COMPLETE (RG590: MX)
A-1163-193-A MAIN BOARD, COMPLETE (RG490: E3)
A-1163-195-A MAIN BOARD, COMPLETE (RG490: E2, E51)
A-1163-196-A MAIN BOARD, COMPLETE (RG490: MX)
*********************
7-685-872-01 SCREW +BVTT 3X8 (S)
< CAPACITOR >
C001
C002
1-136-165-00 FILM
1-136-165-00 FILM
0.1uF
0.1uF
5%
5%
50V
50V
93
HCD-RG490/RG590
MAIN
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
C006
C007
C008
1-126-964-11 ELECT
1-126-965-11 ELECT
1-126-943-11 ELECT
10uF
22uF
2200uF
20%
20%
20%
50V
50V
25V
C141
C142
C143
1-126-964-11 ELECT
1-126-964-11 ELECT
1-137-374-11 MYLAR
10uF
10uF
0.047uF
20%
20%
5%
50V
50V
50V
C010
C011
C012
C013
C015
1-165-621-11
1-136-165-00
1-136-165-00
1-126-943-11
1-126-933-11
CERAMIC CHIP
FILM
FILM
ELECT
ELECT
0.1uF
0.1uF
0.1uF
2200uF
100uF
5%
5%
20%
20%
50V
50V
50V
25V
16V
C144
C145
C146
C147
C148
1-137-374-11
1-162-968-11
1-162-968-11
1-164-362-11
1-164-362-11
MYLAR
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.047uF
0.0047uF
0.0047uF
470PF
470PF
5%
10%
10%
5%
5%
50V
50V
50V
50V
50V
C023
C025
C026
C027
C031
1-126-943-11
1-126-933-11
1-162-974-11
1-162-974-11
1-216-864-11
ELECT
ELECT
CERAMIC CHIP
CERAMIC CHIP
SHORT CHIP
2200uF
100uF
0.01uF
0.01uF
0
25V
16V
50V
50V
C149
C150
C151
C152
C153
1-164-227-11
1-164-227-11
1-164-227-11
1-164-227-11
1-126-960-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.022uF
0.022uF
0.022uF
0.022uF
1uF
10%
25V
10%
25V
10%
25V
10%
25V
20%
50V
(RG490/RG590: UK)
C032
1-162-964-11 CERAMIC CHIP
C154
1-126-960-11 ELECT
1uF
C033
C034
C035
C063
1-126-933-11
1-126-963-11
1-126-947-11
1-164-156-11
C155
1-136-167-00 MYLAR
0.15uF
C155
1-136-168-00 MYLAR
0.18uF
C064
C065
1-162-964-11 CERAMIC CHIP
1-162-964-11 CERAMIC CHIP
C156
1-136-167-00 MYLAR
0.15uF
C156
1-136-168-00 MYLAR
0.18uF
C066
1-162-964-11 CERAMIC CHIP
C068
C069
1-162-964-11 CERAMIC CHIP
1-162-964-11 CERAMIC CHIP
0.001uF 10%
50V
0.001uF 10%
50V
(RG490: E3/RG590: UK, E3)
0.001uF 10%
50V
(RG490: E3/RG590: UK, E3)
0.001uF 10%
50V
0.001uF 10%
50V
20%
50V
(RG490/RG590: UK)
5%
50V
(RG490)
5%
50V
(RG590)
5%
50V
(RG490)
5%
50V
(RG590)
C157
1-136-167-00 MYLAR
0.15uF
5%
C157
1-136-168-00 MYLAR
0.18uF
5%
C109
C110
C111
C112
C114
1-126-964-11
1-126-964-11
1-126-965-11
1-126-947-11
1-164-360-11
ELECT
ELECT
ELECT
ELECT
CERAMIC CHIP
10uF
10uF
22uF
47uF
0.1uF
20%
20%
20%
20%
50V
50V
50V
35V
16V
C158
1-136-167-00 MYLAR
0.15uF
5%
C158
1-136-168-00 MYLAR
0.18uF
5%
C159
1-162-960-11 CERAMIC CHIP
220PF
10%
C115
C116
C117
C118
C119
1-126-933-11
1-126-960-11
1-162-964-11
1-126-961-11
1-126-961-11
ELECT
ELECT
CERAMIC CHIP
ELECT
ELECT
100uF
1uF
0.001uF
2.2uF
2.2uF
20%
20%
10%
20%
20%
16V
50V
50V
50V
50V
C160
C163
1-162-960-11 CERAMIC CHIP
1-125-837-11 CERAMIC CHIP
C164
1-125-837-11 CERAMIC CHIP
C120
C121
C122
C123
1-164-360-11
1-126-933-11
1-165-176-11
1-162-923-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
0.1uF
100uF
0.047uF
47PF
C165
1-125-837-11 CERAMIC CHIP
20%
10%
5%
C166
1-125-837-11 CERAMIC CHIP
220PF
10%
50V
1uF
10%
6.3V
(EXCEPT RG490/RG590: UK)
1uF
10%
6.3V
(EXCEPT RG490/RG590: UK)
1uF
10%
6.3V
(EXCEPT RG490/RG590: UK)
1uF
10%
6.3V
(EXCEPT RG490/RG590: UK)
C124
1-162-923-11 CERAMIC CHIP
47PF
C167
1-104-665-11 ELECT
C168
1-104-665-11 ELECT
C125
C126
C129
C130
C133
1-126-960-11
1-126-960-11
1-126-960-11
1-126-960-11
1-164-156-11
1uF
1uF
1uF
1uF
0.1uF
C169
1-162-974-11 CERAMIC CHIP
C170
1-126-933-11 ELECT
C171
1-162-927-11 CERAMIC CHIP
C172
1-162-927-11 CERAMIC CHIP
C173
C174
C175
1-162-949-11 CERAMIC CHIP
1-162-949-11 CERAMIC CHIP
1-125-837-11 CERAMIC CHIP
C176
1-125-837-11 CERAMIC CHIP
ELECT
ELECT
ELECT
CERAMIC CHIP
ELECT
ELECT
ELECT
ELECT
CERAMIC CHIP
20%
20%
0.001uF 10%
50V
(RG490: E3/RG590: UK, E3)
100uF
20%
16V
4.7uF
20%
50V
47uF
20%
35V
0.1uF
25V
16V
16V
16V
50V
(RG590: UK)
5%
50V
(RG590: UK)
20%
20%
20%
20%
50V
50V
50V
50V
25V
(RG590: UK)
C134
1-164-156-11 CERAMIC CHIP
0.1uF
C135
1-162-960-11 CERAMIC CHIP
220PF
C136
1-162-960-11 CERAMIC CHIP
220PF
C137
C138
1-126-960-11 ELECT
1-126-960-11 ELECT
1uF
1uF
25V
(RG590: UK)
10%
50V
(RG590: UK)
10%
50V
(RG590: UK)
20%
50V
20%
50V
C139
C140
1-107-826-11 CERAMIC CHIP
1-107-826-11 CERAMIC CHIP
0.1uF
0.1uF
10%
10%
94
16V
16V
50V
(RG490)
50V
(RG590)
50V
(RG490)
50V
(RG590)
50V
100uF
20%
25V
(EXCEPT RG490/RG590: UK)
100uF
20%
25V
(EXCEPT RG490/RG590: UK)
0.01uF
50V
(EXCEPT RG490/RG590: UK)
100uF
20%
16V
(EXCEPT RG490/RG590: UK)
100PF
5%
50V
(EXCEPT RG490/RG590: UK)
100PF
5%
50V
(EXCEPT RG490/RG590: UK)
47PF
5%
50V
47PF
5%
50V
1uF
10%
6.3V
(EXCEPT RG490/RG590: UK)
1uF
10%
6.3V
(EXCEPT RG490/RG590: UK)
HCD-RG490/RG590
MAIN
Ref. No.
Part No.
Description
Remark
Ref. No.
C177
1-125-837-11 CERAMIC CHIP
C178
1-125-837-11 CERAMIC CHIP
C253
C254
C255
1-162-923-11 CERAMIC CHIP
1-162-923-11 CERAMIC CHIP
1-162-919-11 CERAMIC CHIP
1uF
10%
6.3V
(EXCEPT RG490/RG590: UK)
1uF
10%
6.3V
(EXCEPT RG490/RG590: UK)
47PF
5%
50V
47PF
5%
50V
22PF
5%
50V
C256
C257
C258
C259
C260
1-162-919-11
1-126-947-11
1-126-947-11
1-126-964-11
1-124-261-00
CERAMIC CHIP
ELECT
ELECT
ELECT
ELECT
22PF
47uF
47uF
10uF
10uF
5%
20%
20%
20%
20%
50V
35V
35V
50V
25V
* CN031
CN041
CN061
C263
C264
C265
C266
C267
1-126-935-11
1-162-964-11
1-126-963-11
1-126-963-11
1-162-968-11
ELECT
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
470uF
0.001uF
4.7uF
4.7uF
0.0047uF
20%
10%
20%
20%
10%
16V
50V
50V
50V
50V
CN091
C268
C271
C273
C274
C275
1-162-968-11
1-165-176-11
1-115-467-11
1-124-261-00
1-164-362-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
0.0047uF
0.047uF
0.22uF
10uF
470PF
10%
10%
10%
20%
5%
50V
16V
10V
25V
50V
C276
C278
C281
C305
1-115-467-11
1-107-826-11
1-162-974-11
1-162-964-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
C317
1-126-926-11 ELECT
0.22uF
10%
10V
0.1uF
10%
16V
0.01uF
50V
0.001uF 10%
50V
(RG490: E3/RG590: UK, E3)
1000uF
20%
10V
C333
1-164-156-11 CERAMIC CHIP
C336
1-162-970-11 CERAMIC CHIP
C385
C386
C387
1-162-927-11 CERAMIC CHIP
1-162-927-11 CERAMIC CHIP
1-162-962-11 CERAMIC CHIP
0.1uF
25V
(RG490: MX/RG590: MX)
0.01uF
10%
25V
(RG490: MX/RG590: MX)
100PF
5%
50V
100PF
5%
50V
470PF
10%
50V
C388
C391
C901
C902
C903
1-162-927-11
1-164-156-11
1-126-933-11
1-126-964-11
1-126-959-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
ELECT
100PF
0.1uF
100uF
10uF
0.47uF
C904
C906
C908
C909
C910
1-164-156-11
1-126-964-11
1-164-156-11
1-164-156-11
1-164-156-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
10uF
0.1uF
0.1uF
0.1uF
C911
C912
C913
C914
C916
1-162-964-11
1-164-156-11
1-162-905-11
1-162-919-11
1-114-154-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
DOUBLE LAYER
0.001uF
0.1uF
1PF
22PF
47000uF
10%
C917
C918
C919
C920
C921
1-164-156-11
1-162-964-11
1-164-156-11
1-162-905-11
1-126-961-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.1uF
0.001uF
0.1uF
1PF
2.2uF
25V
10%
50V
25V
0.25PF 50V
20%
50V
C922
C923
C924
1-126-963-11 ELECT
1-162-960-11 CERAMIC CHIP
1-162-927-11 CERAMIC CHIP
4.7uF
220PF
100PF
20%
10%
5%
Part No.
Description
Remark
C925
1-162-927-11 CERAMIC CHIP
100PF
5%
C926
1-162-960-11 CERAMIC CHIP
220PF
50V
(RG590: UK)
10%
50V
C927
1-162-919-11 CERAMIC CHIP
22PF
5%
50V
< CONNECTOR >
CN061
CN201
CN301
CN302
CN331
CN991
1-573-094-11 SOCKET, CONNECTOR 13P
1-819-131-11 PIN, CONNECTOR 3P
1-568-828-11 CONNECTOR, FFC 9P
(RG490: E3/RG590: UK, E3)
1-784-774-11 CONNECTOR, FFC 13P
(EXCEPT RG490: E3/RG590: UK, E3)
1-568-828-11 CONNECTOR FFC 9P
1-568-830-11 CONNECTOR, FFC11P
1-779-291-11 CONNECTOR, FFC (LIF (NON-ZIF)) 23P
(EXCEPT RG490: MX/RG590: MX)
1-779-299-11 CONNECTOR, FFC (LIF (NON-ZIF)) 31P
(RG490: MX/RG590: MX)
1-784-774-11 CONNECTOR, FFC 13P
(RG490: MX/RG590: MX)
1-784-780-11 CONNECTOR, FFC 19P
< DIODE >
5%
20%
20%
20%
20%
50V
25V
16V
50V
50V
25V
50V
25V
25V
25V
50V
25V
0.25PF 50V
5%
50V
5.5V
D001
D002
D003
D004
D006
6-500-522-21
6-500-522-21
6-500-522-21
6-500-522-21
8-719-988-61
DIODE
DIODE
DIODE
DIODE
DIODE
10EDB40-TB3
10EDB40-TB3
10EDB40-TB3
10EDB40-TB3
1SS355TE-17
D007
D008
D009
D011
D012
6-501-166-01
8-719-000-08
6-500-335-01
6-500-522-21
6-500-522-21
DIODE
DIODE
DIODE
DIODE
DIODE
UDZW-TE17-4.7B
MC2838
MC2838-T112-1
10EDB40-TB3
10EDB40-TB3
D013
D014
D021
D022
D023
6-500-522-21
6-500-522-21
6-500-522-21
6-500-522-21
6-500-522-21
DIODE
DIODE
DIODE
DIODE
DIODE
10EDB40-TB3
10EDB40-TB3
10EDB40-TB3
10EDB40-TB3
10EDB40-TB3
D024
D031
D035
D036
D301
6-500-522-21
8-719-988-61
8-719-000-08
8-719-000-07
6-500-522-21
DIODE
DIODE
DIODE
DIODE
DIODE
10EDB40-TB3
1SS355TE-17
MC2838
MC2836
10EDB40-TB3
D302
D303
D901
D902
D905
6-500-522-21 DIODE 10EDB40-TB3
6-501-166-01 DIODE UDZW-TE17-4.7B
(RG490: MX/RG590: MX)
6-501-166-01 DIODE UDZW-TE17-4.7B
8-719-000-07 DIODE MC2836
8-719-988-61 DIODE 1SS355TE-17
D910
D921
D923
D943
D947
8-719-988-61
6-500-848-01
6-500-848-01
8-719-000-08
8-719-988-61
DIODE
DIODE
DIODE
DIODE
DIODE
1SS355TE-17
MC2840-T112-1
MC2840-T112-1
MC2838
1SS355TE-17
< IC >
50V
50V
50V
(RG590: UK)
IC006
IC011
IC021
6-702-771-01 IC TA78033LS
8-759-701-59 IC NJM78M09FA
8-759-701-59 IC NJM78M09FA
95
HCD-RG490/RG590
MAIN
Ref. No.
Remark
Ref. No.
IC101
IC102
Part No.
6-709-331-01 IC R2S15207FP
6-709-330-01 IC R2S15208SP (EXCEPT RG490/RG590: UK)
Description
Q904
IC251
IC901
IC902
8-759-909-71 IC BA4558F
(Not supplied) IC uPD78F0547GC (S)-UBT-A
8-759-713-61 IC PST3429UL
Part No.
Description
8-729-120-28 TRANSISTOR
Remark
2SC1623-L5L6
< RESISTOR >
< JUMPER RESISTOR >
JR101
1-216-864-11 SHORT CHIP
0
JR102
1-216-864-11 SHORT CHIP
0
JR103
JR104
JR105
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
0
0
0
JR106
JR107
JR108
JR109
JR110
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
JR111
JR112
JR113
JR114
JR115
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0 (RG490: MX/RG590: MX)
0
0
JR116
JR117
JR118
JR119
JR120
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
(RG490: E3/RG590: UK, E3)
(RG490: E3/RG590: UK, E3)
JR121
JR122
JR123
0 (RG490: MX/RG590: MX)
0
0
0
0
(EXCEPT RG490: MX/RG590: MX)
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
0
0
0
< TRANSISTOR >
Q002
Q011
Q041
Q042
Q043
8-729-120-28
8-729-027-43
8-729-120-28
8-729-037-13
8-729-037-03
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1623-L5L6
DTC114EKA-T146
2SC1623-L5L6
KTA1271Y
KTA1266GR-AT
Q044
Q045
Q046
Q111
Q112
8-729-120-28
8-729-120-28
8-729-045-62
8-729-120-28
8-729-120-28
TRANSISTOR
TRANSISTOR
FET
TRANSISTOR
TRANSISTOR
2SC1623-L5L6
2SC1623-L5L6
2SK2158-T2B
2SC1623-L5L6
2SC1623-L5L6
Q113
Q114
Q251
Q252
Q261
8-729-120-28
8-729-120-28
8-729-120-28
8-729-120-28
8-729-027-23
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1623-L5L6
2SC1623-L5L6
2SC1623-L5L6
2SC1623-L5L6
DTA114EKA-T146
Q271
Q272
Q274
Q276
Q277
8-729-120-28
8-729-120-28
6-551-276-01
8-729-120-28
8-729-120-28
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
Q901
Q902
Q903
8-729-120-28 TRANSISTOR
8-729-120-28 TRANSISTOR
8-729-037-13 TRANSISTOR
96
R001
R005
R006
R010
R011
1-216-801-11
1-216-829-11
1-216-829-11
1-216-837-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22
4.7K
4.7K
22K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R013
R014
R016
R032
R033
1-216-837-11
1-216-833-11
1-216-845-11
1-216-821-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22K
10K
100K
1K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R034
R035
R036
R037
R039
1-216-837-11
1-216-829-11
1-216-829-11
1-216-829-11
1-260-308-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
CARBON
22K
4.7K
4.7K
4.7K
22
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/2W
R041
R042
R043
R045
R046
1-216-864-11
1-216-833-11
1-216-829-11
1-216-821-11
1-216-793-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
10K
4.7K
1K
4.7
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
R047
R048
R049
R050
R051
1-216-789-11
1-216-801-11
1-216-849-11
1-216-825-11
1-216-825-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2
22
220K
2.2K
2.2K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R052
R053
R054
R055
R056
1-216-853-11
1-216-837-11
1-216-837-11
1-216-825-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
470K
22K
22K
2.2K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R057
0 R059
0 R060
R061
R063
1-216-821-11
1-215-892-11
1-215-892-11
1-216-797-11
1-216-809-11
METAL CHIP
METAL OXIDE
METAL OXIDE
METAL CHIP
METAL CHIP
1K
1K
1K
10
100
5%
5%
5%
5%
5%
1/10W
2W F
2W F
1/10W
1/10W
R064
R068
R070
R101
R102
1-216-809-11 METAL CHIP
100
5%
1/10W
1-216-797-11 METAL CHIP
10
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-833-11 METAL CHIP
10K
5%
1/10W
1-216-833-11 METAL CHIP
10K
5%
1/10W
1-216-821-11 METAL CHIP
1K
5%
1/10W
R103
R104
R105
R106
1-216-833-11
1-216-833-11
1-216-809-11
1-216-821-11
R108
METAL CHIP
10K
5%
1/10W
METAL CHIP
10K
5%
1/10W
METAL CHIP
100
5%
1/10W
METAL CHIP
1K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-825-11 METAL CHIP
2.2K
5%
1/10W
2SC1623-L5L6
2SC1623-L5L6
RT1N431C-TP-1
2SC1623-L5L6
2SC1623-L5L6
R109
R110
R111
R112
R113
1-216-829-11
1-216-841-11
1-216-845-11
1-216-817-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
47K
100K
470
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
2SC1623-L5L6
2SC1623-L5L6
KTA1271Y
R114
R116
R119
1-216-825-11 METAL CHIP
1-216-809-11 METAL CHIP
1-216-817-11 METAL CHIP
2.2K
100
470
5%
5%
5%
1/10W
1/10W
1/10W
Note: IC901 on the MAIN board cannot exchange with single.
When IC901 is damaged, exchange the entire mounted board.
HCD-RG490/RG590
MAIN
Ref. No.
Part No.
Description
Remark
R120
R121
1-216-817-11 METAL CHIP
1-216-809-11 METAL CHIP
470
100
5%
5%
1/10W
1/10W
R122
R123
R124
R125
R126
1-216-809-11
1-216-825-11
1-216-825-11
1-216-829-11
1-216-829-11
100
2.2K
2.2K
4.7K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R127
1-216-821-11 METAL CHIP
1K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-825-11 METAL CHIP
2.2K
5%
1/10W
(RG490: E3/RG590: UK, E3)
1-216-821-11 METAL CHIP
1K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-825-11 METAL CHIP
2.2K
5%
1/10W
(RG490: E3/RG590: UK, E3)
1-216-841-11 METAL CHIP
47K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
R127
R128
R128
R129
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
R129
1-216-853-11 METAL CHIP
R130
1-216-841-11
R130
1-216-853-11
R131
R132
1-216-809-11
1-216-809-11
R133
R135
R136
R137
1-216-864-11 SHORT CHIP
0
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-864-11 SHORT CHIP
0
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-833-11 METAL CHIP
10K
5%
1/10W
1-216-833-11 METAL CHIP
10K
5%
1/10W
1-216-825-11 METAL CHIP
2.2K
5%
1/10W
R138
R139
R140
R141
R142
1-216-825-11
1-216-821-11
1-216-821-11
1-216-837-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
1K
1K
22K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R143
R144
R145
R147
R148
1-216-813-11
1-216-813-11
1-216-841-11
1-216-841-11
1-216-841-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220
220
47K
47K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R151
1-216-809-11 METAL CHIP
R152
1-216-809-11 METAL CHIP
R153
1-216-809-11 METAL CHIP
R154
R155
1-216-857-11 METAL CHIP
1-216-849-11 METAL CHIP
100
5%
1/10W
(EXCEPT RG490/RG590: UK)
100
5%
1/10W
(EXCEPT RG490/RG590: UK)
100
5%
1/10W
(EXCEPT RG490/RG590: UK)
1M
5%
1/10W
220K
5%
1/10W
R156
R157
R158
R159
R160
1-216-849-11
1-216-849-11
1-216-849-11
1-216-841-11
1-216-841-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220K
220K
220K
47K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R161
R162
R163
R164
R165
1-216-837-11
1-216-837-11
1-216-841-11
1-216-841-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22K
22K
47K
47K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R134
470K
5%
1/10W
(RG490: E3/RG590: UK, E3)
METAL CHIP
47K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
METAL CHIP
470K
5%
1/10W
(RG490: E3/RG590: UK, E3)
METAL CHIP
100
5%
1/10W
METAL CHIP
100
5%
1/10W
Ref. No.
Part No.
Description
Remark
R166
R167
R168
R171
R172
1-216-829-11
1-216-821-11
1-216-821-11
1-216-864-11
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
4.7K
1K
1K
0
0
5%
5%
5%
1/10W
1/10W
1/10W
R175
R176
R177
R178
R201
1-216-825-11
1-216-825-11
1-216-864-11
1-216-864-11
1-216-825-11
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
2.2K
2.2K
0
0
2.2K
5%
5%
1/10W
1/10W
5%
1/10W
R202
R250
1-216-825-11 METAL CHIP
1-216-829-11 METAL CHIP
2.2K
4.7K
5%
5%
R250
1-216-833-11 METAL CHIP
10K
5%
R251
R252
1-216-817-11 METAL CHIP
1-216-817-11 METAL CHIP
470
470
5%
5%
1/10W
1/10W
(RG490)
1/10W
(RG590)
1/10W
1/10W
R253
1-216-829-11 METAL CHIP
4.7K
5%
R253
1-216-833-11 METAL CHIP
10K
5%
R254
1-216-826-11 METAL CHIP
2.7K
5%
R254
1-216-829-11 METAL CHIP
4.7K
5%
R257
1-216-826-11 METAL CHIP
2.7K
5%
R257
1-216-829-11 METAL CHIP
4.7K
5%
R261
R262
R263
R264
1-216-833-11
1-216-833-11
1-216-825-11
1-216-825-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
10K
2.2K
2.2K
5%
5%
5%
5%
1/10W
(RG590)
1/10W
1/10W
1/10W
1/10W
R265
R267
R268
R269
R271
1-216-809-11
1-216-841-11
1-216-829-11
1-216-825-11
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
100
47K
4.7K
2.2K
0
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
R272
R274
R276
R277
R279
1-216-829-11
1-216-829-11
1-216-833-11
1-216-825-11
1-216-825-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
4.7K
10K
2.2K
2.2K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R280
R281
R283
R285
R286
1-216-829-11
1-216-825-11
1-216-833-11
1-216-833-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
2.2K
10K
10K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R287
R289
R290
R291
R292
1-216-853-11
1-216-845-11
1-216-821-11
1-216-825-11
1-216-825-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
470K
100K
1K
2.2K
2.2K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R315
R316
R317
R318
R319
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
(RG490)
1/10W
(RG590)
1/10W
(RG490)
1/10W
(RG590)
1/10W
(RG490)
97
HCD-RG490/RG590
MAIN
Ref. No.
Part No.
Description
R320
1-216-809-11 METAL CHIP
R321
R322
R323
R324
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
R325
R326
R329
1-216-837-11 METAL CHIP
1-216-837-11 METAL CHIP
1-216-809-11 METAL CHIP
R330
1-216-821-11 METAL CHIP
R331
1-216-809-11 METAL CHIP
R332
1-216-809-11 METAL CHIP
R333
1-216-833-11 METAL CHIP
R334
1-216-809-11 METAL CHIP
R335
1-216-809-11 METAL CHIP
R336
1-216-833-11 METAL CHIP
R337
1-216-809-11 METAL CHIP
R338
1-216-809-11 METAL CHIP
R339
1-216-821-11 METAL CHIP
R340
1-216-821-11 METAL CHIP
R341
Remark
Ref. No.
Part No.
Description
Remark
5%
1/10W
(RG490: MX/RG590: MX)
100
5%
1/10W
100
5%
1/10W
100
5%
1/10W
100
5%
1/10W
R363
1-216-864-11 SHORT CHIP
0
R364
R365
R366
R372
1-216-864-11
1-216-864-11
1-216-864-11
1-216-809-11
0
0
0
100
22K
22K
100
R381
1-216-821-11 METAL CHIP
5%
1/10W
(RG490: MX/RG590: MX)
1K
5%
1/10W
R382
R383
R901
R902
R903
1-216-821-11
1-216-821-11
1-216-845-11
1-216-864-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
1K
1K
100K
0
10K
5%
5%
5%
1/10W
1/10W
1/10W
5%
1/10W
R904
R905
R907
R908
R909
1-216-825-11
1-216-833-11
1-216-841-11
1-216-841-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
10K
47K
47K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R910
R911
R912
R913
R914
1-216-833-11
1-216-821-11
1-216-821-11
1-216-821-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
1K
1K
1K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R918
R919
R920
R921
R922
1-216-849-11
1-216-864-11
1-216-853-11
1-216-809-11
1-216-849-11
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220K
0
470K
100
220K
5%
1/10W
5%
5%
5%
1/10W
1/10W
1/10W
1-216-833-11 METAL CHIP
5%
1/10W
(RG490: MX/RG590: MX)
100
5%
1/10W
(RG490: MX/RG590: MX)
1K
5%
1/10W
(RG490: MX/RG590: MX)
1K
5%
1/10W
(RG490: MX/RG590: MX)
10K
5%
1/10W
R923
R924
R925
1-216-809-11 METAL CHIP
1-216-809-11 METAL CHIP
1-216-809-11 METAL CHIP
R342
R343
R344
R345
R346
1-216-821-11
1-216-837-11
1-216-837-11
1-216-833-11
1-216-821-11
1K
22K
22K
10K
1K
R925
1-216-821-11 METAL CHIP
R932
1-216-825-11 METAL CHIP
5%
1/10W
5%
1/10W
5%
1/10W
(RG490: MX/RG590: MX)
1K
5%
1/10W
(RG590: UK)
2.2K
5%
1/10W
R347
R348
R349
R350
1-216-837-11
1-216-837-11
1-216-833-11
1-216-833-11
R935
R936
R941
R942
R943
1-216-833-11
1-216-837-11
1-216-825-11
1-216-833-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
22K
2.2K
10K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R944
R945
R946
R947
R948
1-216-849-11
1-216-813-11
1-216-864-11
1-216-849-11
1-216-825-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
220K
220
0
220K
2.2K
5%
5%
1/10W
1/10W
5%
5%
1/10W
1/10W
R949
R950
R951
R952
R953
1-216-833-11
1-216-829-11
1-216-813-11
1-216-841-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
4.7K
220
47K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R955
R956
R957
R959
R961
1-216-821-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
100
100
100
100
R961
1-216-821-11 METAL CHIP
1K
R963
1-216-809-11 METAL CHIP
100
R351
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
5%
1/10W
5%
1/10W
5%
1/10W
(RG490: MX/RG590: MX)
1K
5%
1/10W
(RG490: MX/RG590: MX)
100
5%
1/10W
(RG490: MX/RG590: MX)
100
5%
1/10W
(RG490: MX/RG590: MX)
10K
5%
1/10W
(RG490: MX/RG590: MX)
100
5%
1/10W
(RG490: MX/RG590: MX)
100
5%
1/10W
(RG490: MX/RG590: MX)
10K
5%
1/10W
(RG490: MX/RG590: MX)
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
METAL CHIP
22K
5%
1/10W
METAL CHIP
22K
5%
1/10W
METAL CHIP
10K
5%
1/10W
METAL CHIP
10K
5%
1/10W
(RG490: E2, E51, AR/RG590: E2, E51, AR)
1-216-833-11 METAL CHIP
10K
5%
1/10W
(RG490: E2, E51, AR/RG590: E2, E51, AR)
R352
1-216-821-11 METAL CHIP
R352
1-216-833-11 METAL CHIP
R353
R354
1-216-833-11 METAL CHIP
1-216-821-11 METAL CHIP
R354
1-216-837-11 METAL CHIP
R355
1-216-825-11 METAL CHIP
R355
1-216-829-11 METAL CHIP
R355
1-216-837-11 METAL CHIP
R356
1-216-857-11 METAL CHIP
98
100
1K
5%
1/10W
(RG590: UK)
10K
5%
1/10W
(RG490: MX/RG590: MX)
10K
5%
1/10W
1K
5%
1/10W
(RG590)
22K
5%
1/10W
(RG490)
2.2K
5%
1/10W
(RG590: E2, E3, E51, MX, AR)
4.7K
5%
1/10W
(RG590: UK)
22K
5%
1/10W
(RG490)
1M
5%
1/10W
(RG490/RG590: UK)
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
100
100
100
5%
1/10W
5%
1/10W
5%
1/10W
5%
1/10W
5%
1/10W
(RG490: MX/RG590: MX)
5%
1/10W
(RG590: UK)
5%
1/10W
HCD-RG490/RG590
MAIN
Ref. No.
Part No.
Description
Remark
R965
R967
R968
1-216-809-11 METAL CHIP
1-216-809-11 METAL CHIP
1-216-809-11 METAL CHIP
100
100
100
R969
R970
R971
R972
R973
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
R974
R975
R976
R977
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
R979
5%
1/10W
5%
1/10W
5%
1/10W
(RG490: MX/RG590: MX)
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
Ref. No.
C810
C811
Part No.
Description
MIC. AUX. HP
Remark
1-164-315-11 CERAMIC CHIP 470PF
5%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
1-124-463-00 ELECT
0.1uF
20%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
C813
1-125-972-11 ELECT
100uF
20%
16V
(EXCEPT RG490: E3/RG590: UK, E3)
ELECT
2.2uF
20%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
CERAMIC CHIP 47PF
5%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
CERAMIC CHIP 220PF
2%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
ELECT
2.2uF
20%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
C814
1-124-257-00
C815
1-162-923-11
C816
1-164-816-11
C817
1-124-257-00
1-216-809-11 METAL CHIP
5%
1/10W
5%
1/10W
5%
1/10W
5%
1/10W
(RG490: MX/RG590: MX)
100
5%
1/10W
C818
1-126-157-11 ELECT
R980
R981
R982
R996
R997
1-216-809-11
1-216-809-11
1-216-817-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
470
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C819
1-164-156-11
C820
1-162-964-11
C821
1-162-964-11
R999
1-216-809-11 METAL CHIP
100
5%
1/10W
C833
1-164-156-11
C851
1-126-160-11 ELECT
C852
1-162-964-11 CERAMIC CHIP
C853
1-165-176-11 CERAMIC CHIP
C854
1-164-227-11 CERAMIC CHIP
C856
1-162-968-11 CERAMIC CHIP
C857
1-124-465-00 ELECT
C858
1-124-465-00 ELECT
C859
1-107-826-11 CERAMIC CHIP
C861
1-126-160-11 ELECT
C862
1-165-176-11 CERAMIC CHIP
C863
1-124-257-00 ELECT
C864
1-162-964-11 CERAMIC CHIP
C865
1-162-968-11 CERAMIC CHIP
C867
1-165-176-11 CERAMIC CHIP
C868
1-164-227-11 CERAMIC CHIP
C869
1-124-589-11 ELECT
C870
1-124-589-11 ELECT
10uF
20%
16V
(EXCEPT RG490: E3/RG590: UK, E3)
CERAMIC CHIP 0.1uF
25V
(EXCEPT RG490: E3/RG590: UK, E3)
CERAMIC CHIP 0.001uF 10%
50V
(RG490: E3/RG590: UK, E3)
CERAMIC CHIP 0.001uF 10%
50V
(RG490: E3/RG590: UK, E3)
CERAMIC CHIP 0.1uF
25V
(EXCEPT RG490: E3/RG590: UK, E3)
< VIBRATOR >
X901
1-579-463-11 VIBRATOR, CRYSTAL (32.768kHz)
X902
1-795-482-11 VIBRATOR, CERAMIC (16MHz)
************************************************************
A-1159-739-A MIC. AUX. HP BOARD, COMPLETE
(RG490: E3/RG590: UK, E3)
A-1159-740-A MIC. AUX. HP BOARD, COMPLETE
(RG490: E2, E51/RG590: E2, E51, AR)
A-1159-741-A MIC. AUX. HP BOARD, COMPLETE
(RG490: MX/RG590: MX)
***************************
< CAPACITOR >
C781
C781
C782
C782
C783
C784
C801
C802
C803
C805
C807
C808
C809
1-162-964-11 CERAMIC CHIP 0.001uF 10%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
1-162-966-11 CERAMIC CHIP 0.0022uF 10%
50V
(RG490: E3/RG590: UK, E3)
1-162-964-11 CERAMIC CHIP 0.001uF 10%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
1-162-966-11 CERAMIC CHIP 0.0022uF 10%
50V
(RG490: E3/RG590: UK, E3)
1-165-621-11 CERAMIC CHIP 0.1uF
50V
1-165-621-11 CERAMIC CHIP 0.1uF
50V
1-126-157-11 ELECT
10uF
20%
16V
(EXCEPT RG490: E3/RG590: UK, E3)
1-115-416-11 CERAMIC CHIP 0.001uF 5%
25V
(EXCEPT RG490: E3/RG590: UK, E3)
1-136-157-00 FILM
0.022uF 5%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
1-136-157-00 FILM
0.022uF 5%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
1-115-416-11 CERAMIC CHIP 0.001uF 5%
25V
(EXCEPT RG490: E3/RG590: UK, E3)
1-164-230-11 CERAMIC CHIP 220PF
5%
50V
(EXCEPT RG490: E3/RG590: UK, E3)
1-126-157-11 ELECT
10uF
20%
16V
(EXCEPT RG490: E3/RG590: UK, E3)
1uF
20%
50V
(RG490: MX/RG590: MX)
0.001uF 10%
50V
(RG490: MX/RG590: MX)
0.047uF 10%
16V
(RG490: MX/RG590: MX)
0.022uF 10%
25V
(RG490: MX/RG590: MX)
0.0047uF 10%
50V
(RG490: MX/RG590: MX)
0.47uF
20%
50V
(RG490: MX/RG590: MX)
0.47uF
20%
50V
(RG490: MX/RG590: MX)
0.1uF
10%
16V
(RG490: MX/RG590: MX)
1uF
20%
50V
(RG490: MX/RG590: MX)
0.047uF 10%
16V
(RG490: MX/RG590: MX)
2.2uF
20%
50V
(RG490: MX/RG590: MX)
0.001uF 10%
50V
(RG490: MX/RG590: MX)
0.0047uF 10%
50V
(RG490: MX/RG590: MX)
0.047uF 10%
16V
(RG490: MX/RG590: MX)
0.022uF 10%
25V
(RG490: MX/RG590: MX)
47uF
20%
16V
(RG490: MX/RG590: MX)
47uF
20%
16V
(RG490: MX/RG590: MX)
< DIODE >
D851
6-501-167-01 DIODE UDZW-TE17-5.1B
(RG490: MX/RG590: MX)
99
HCD-RG490/RG590
MIC. AUX. HP
Ref. No.
MOTOR (LD)
Part No.
MOTOR (TB)
Description
Remark
Ref. No.
R816
< EARTH TERMINAL >
R817
* EP701
* EP801
1-537-738-21 TERMINAL, EARTH
1-537-738-21 TERMINAL, EARTH
(EXCEPT RG490: E3/RG590: UK, E3)
R818
R819
< IC >
R820
IC801
IC802
8-759-909-71 IC BA4558F
(EXCEPT RG490: E3/RG590: UK, E3)
8-759-496-41 IC M65850FP-E1 (RG490: MX/RG590: MX)
< JACK >
J701
J702
JK801
JK802
JK802
1-794-702-11
1-794-702-11
1-816-573-11
1-816-573-11
JACK, HEADPHONE (PHONES)
JACK, HEADPHONE AUDIO IN)
JACK (MIC 1) (RG490: MX/RG590: MX)
JACK (MIC)
(RG490: E2, E51/RG590: E2, E51, AR)
1-816-573-11 JACK (MIC 2) (RG490: MX/RG590: MX)
R821
Part No.
Description
R823
R824
R825
R826
1-216-833-11 METAL CHIP
10K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-825-11 METAL CHIP
2.2K
5%
1/10W
1-216-837-11 METAL CHIP
22K
5%
1/10W
1-216-821-11 METAL CHIP
1K
5%
1/10W
1-216-821-11 METAL CHIP
1K
5%
1/10W
R827
R831
R832
R851
1-216-833-11
1-216-853-11
1-216-853-11
1-216-837-11
R852
1-216-837-11 METAL CHIP
R853
1-216-837-11 METAL CHIP
R854
1-216-841-11 METAL CHIP
R855
1-216-837-11 METAL CHIP
R856
1-216-833-11 METAL CHIP
R857
1-216-837-11 METAL CHIP
R858
1-216-837-11 METAL CHIP
R859
1-216-837-11 METAL CHIP
R860
1-216-845-11 METAL CHIP
R861
1-216-817-11 METAL CHIP
R862
1-216-817-11 METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
< JUMPER RESISTOR >
JR801
JR802
1-216-864-11 SHORT CHIP
0
(RG490: E2, E51/RG590: E2, E51, AR)
1-216-864-11 SHORT CHIP
0
(RG490: E2, E51/RG590: E2, E51, AR)
< TRANSISTOR >
Q801
8-729-120-28 TRANSISTOR
2SC1623-L5L6
(EXCEPT RG490: E3/RG590: UK, E3)
< RESISTOR >
R801
1-216-829-11 METAL CHIP
R802
R803
1-216-864-11
1-216-829-11
R804
1-216-864-11
R805
1-216-845-11
R806
1-216-845-11 METAL CHIP
100K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-833-11 METAL CHIP
10K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-833-11 METAL CHIP
10K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-845-11 METAL CHIP
100K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-821-11 METAL CHIP
1K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
R807
R808
R809
R810
R811
R812
R813
R814
R815
100
4.7K
5%
1/10W
(RG490: MX/RG590: MX)
SHORT CHIP
0 (RG490: MX/RG590: MX)
METAL CHIP
4.7K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
SHORT CHIP
0
(EXCEPT RG490: E3/RG590: UK, E3)
METAL CHIP
100K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-841-11 METAL CHIP
47K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-809-11 METAL CHIP
100
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-833-11 METAL CHIP
10K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-849-11 METAL CHIP
220K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-809-11 METAL CHIP
100
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
Remark
1-216-845-11 METAL CHIP
100K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-829-11 METAL CHIP
4.7K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-829-11 METAL CHIP
4.7K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-853-11 METAL CHIP
470K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
1-216-837-11 METAL CHIP
22K
5%
1/10W
(EXCEPT RG490: E3/RG590: UK, E3)
10K
5%
1/10W
470K
5%
1/10W
470K
5%
1/10W
22K
5%
1/10W
(RG490: MX/RG590: MX)
22K
5%
1/10W
(RG490: MX/RG590: MX)
22K
5%
1/10W
(RG490: MX/RG590: MX)
47K
5%
1/10W
(RG490: MX/RG590: MX)
22K
5%
1/10W
(RG490: MX/RG590: MX)
10K
5%
1/10W
(RG490: MX/RG590: MX)
22K
5%
1/10W
(RG490: MX/RG590: MX)
22K
5%
1/10W
(RG490: MX/RG590: MX)
22K
5%
1/10W
(RG490: MX/RG590: MX)
100K
5%
1/10W
(RG490: MX/RG590: MX)
470
5%
1/10W
(RG490: MX/RG590: MX)
470
5%
1/10W
(RG490: MX/RG590: MX)
< VARIABLE RESISTOR >
VR801
1-223-983-11 RES, VAR, CARBON 50K (MIC LEVEL)
(EXCEPT RG490: E3/RG590: UK, E3)
VR851 1-223-983-11 RES, VAR, CARBON 50K (ECHO LEVEL)
(RG490: MX/RG590: MX)
************************************************************
1-687-133-12 MOTOR (LD) BOARD
*****************
************************************************************
1-687-134-12 MOTOR (TB) BOARD
*****************
< CONNECTOR >
CN742 1-784-727-11 CONNECTOR, FFC 5P
************************************************************
HCD-RG490/RG590
PANEL
Ref. No.
Part No.
Description
Remark
A-1159-666-A PANEL BOARD, COMPLETE
(RG490: E2, E3, E51/RG590: UK)
A-1159-667-A PANEL BOARD, COMPLETE
(RG590: E2, E3, E51, AR)
A-1159-668-A PANEL BOARD, COMPLETE (RG590: MX)
A-1163-174-A PANEL BOARD, COMPLETE (RG490: MX)
**********************
Ref. No.
FL701
Part No.
Description
Remark
1-519-872-11 INDICATOR TUBE, FLUORESCENT
(EXCEPT RG490/RG590: UK)
< IC >
IC610
IC701
6-600-446-01 IC RPM7240-H18
6-806-287-01 IC uPD780232GC-509-8BT-A
2-658-282-01 FL GUIDE
< JUMPER RESISTOR >
< CAPACITOR >
C621
C622
C625
C631
C641
1-126-961-11
1-126-961-11
1-128-131-11
1-126-947-11
1-162-970-11
ELECT
ELECT
ELECT
ELECT
CERAMIC CHIP
2.2uF
2.2uF
22uF
47uF
0.01uF
20%
20%
20%
20%
10%
50V
50V
50V
35V
25V
C642
C701
C702
C703
C704
1-162-970-11
1-164-156-11
1-126-947-11
1-164-156-11
1-162-962-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.1uF
47uF
0.1uF
470PF
10%
10%
25V
25V
35V
25V
50V
C705
C707
C708
C709
C710
1-162-962-11
1-162-968-11
1-164-156-11
1-126-947-11
1-164-156-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
470PF
10%
0.0047uF 10%
0.1uF
47uF
20%
0.1uF
50V
50V
25V
35V
25V
C711
C712
1-165-621-11 CERAMIC CHIP
1-126-965-11 ELECT
0.1uF
22uF
50V
50V
20%
20%
JR602
JR603
JR604
JR605
JR606
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
JR607
JR608
JR609
JR610
JR611
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
JR612
JR613
JR614
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
0
0
0
< TRANSISTOR >
Q601
Q602
Q603
Q604
Q605
8-729-120-28
8-729-120-28
8-729-120-28
8-729-120-28
8-729-120-28
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1623-L5L6
2SC1623-L5L6
2SC1623-L5L6
2SC1623-L5L6
2SC1623-L5L6
Q621
Q701
Q702
Q703
Q704
8-729-120-28
6-551-276-01
6-551-276-01
6-551-276-01
8-729-040-76
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1623-L5L6
RT1N431C-TP-1
RT1N431C-TP-1
RT1N431C-TP-1
KTA1273-Y-AT
Q705
Q706
8-729-037-13 TRANSISTOR
8-729-037-13 TRANSISTOR
< CONNECTOR >
CN601
* CN606
1-784-780-11 CONNECTOR, FFC 19P
1-815-553-11 PIN, CONNECTOR (PWB) 5P
(EXCEPT RG490/RG590: UK)
< DIODE >
D601
D601
D602
D602
D603
D603
D604
D604
D605
D605
D711
6-501-451-01 LED 1L4344B22COCDT02 (STREAM)
(EXCEPT RG490/RG590: UK)
6-501-452-01 LED 1L4345V22DOTDT02 (STREAM)
(RG490/RG590: UK)
6-501-451-01 LED 1L4344B22COCDT02 (STREAM)
(EXCEPT RG490/RG590: UK)
6-501-452-01 LED 1L4345V22DOTDT02 (STREAM)
(RG490/RG590: UK)
6-501-451-01 LED 1L4344B22COCDT02 (STREAM)
(EXCEPT RG490/RG590: UK)
6-501-452-01 LED 1L4345V22DOTDT02 (STREAM)
(RG490/RG590: UK)
6-501-451-01 LED 1L4344B22COCDT02 (STREAM)
(EXCEPT RG490/RG590: UK)
6-501-452-01 LED 1L4345V22DOTDT02 (STREAM)
(RG490/RG590: UK)
6-501-451-01 LED 1L4344B22COCDT02 (STREAM)
(EXCEPT RG490/RG590: UK)
6-501-452-01 LED 1L4345V22DOTDT02 (STREAM)
(RG490/RG590: UK)
8-719-000-07 DIODE MC2836
< FLUORESCENT INDICATOR >
FL701
1-519-871-11 INDICATOR TUBE, FLUORESCENT
(RG490/RG590: UK)
KTA1271Y
KTA1271Y
< RESISTOR >
R601
R602
R603
R604
R605
1-216-821-11
1-216-821-11
1-216-821-11
1-216-821-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
1K
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R607
R608
R609
R610
R611
1-216-833-11
1-216-833-11
1-216-809-11
1-216-845-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
10K
100
100K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R612
R613
R614
R615
R617
1-216-821-11
1-216-821-11
1-216-821-11
1-216-821-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
1K
1K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R618
R627
R628
R629
R631
1-216-833-11
1-216-809-11
1-216-805-11
1-216-809-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
100
47
100
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
101
HCD-RG490/RG590
PANEL
Ref. No.
POWER
Part No.
Description
R632
R633
R634
R635
R647
1-216-833-11
1-216-833-11
1-216-833-11
1-216-833-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
10K
10K
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
Remark
R650
R651
R660
R661
R662
1-216-837-11
1-216-841-11
1-216-837-11
1-216-841-11
1-216-825-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22K
47K
22K
47K
2.2K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
S611
S612
S613
S621
S622
1-762-875-21
1-762-875-21
1-762-875-21
1-762-875-21
1-762-875-21
R663
R670
R671
R672
R673
1-216-825-11
1-216-837-11
1-216-841-11
1-216-825-11
1-216-825-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
22K
47K
2.2K
2.2K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
S623
S671
1-762-875-21 SWITCH, KEYBOARD (x)
1-479-670-11 ENCODER, ROTARY (VOLUME)
R674
R680
R681
R690
1-216-829-11
1-216-837-11
1-216-841-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
22K
47K
10K
R690
1-216-837-11 METAL CHIP
R691
1-216-841-11 METAL CHIP
R701
R702
R703
R704
1-216-864-11
1-216-813-11
1-216-809-11
1-216-864-11
SHORT CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
47K
5%
1/10W
(EXCEPT RG490/RG590: UK)
0
220
5%
1/10W
100
5%
1/10W
0
R705
R706
R707
R708
R709
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-825-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
2.2K
R710
R711
R712
R713
1-216-821-11
1-216-821-11
1-216-821-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
R713
5%
1/10W
5%
1/10W
5%
1/10W
5%
1/10W
(RG490/RG590: UK)
22K
5%
1/10W
(EXCEPT RG490/RG590: UK)
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
Ref. No.
R775
R776
Part No.
Description
1-216-821-11 METAL CHIP
1-216-833-11 METAL CHIP
1K
10K
5%
5%
1/10W
1/10W
< SWITCH >
SWITCH, KEYBOARD (M, SELECT FOLDER +)
SWITCH, KEYBOARD (L, TUNING +)
SWITCH, KEYBOARD (u)
SWITCH, KEYBOARD (m, SELECT FOLDER –)
SWITCH, KEYBOARD (l, TUNING –)
< VIBRATOR >
X701
1-795-054-21 VIBRATOR, CERAMIC (4.19MHz)
************************************************************
A-1159-779-A POWER BOARD, COMPLETE (RG590: UK)
A-1159-780-A POWER BOARD, COMPLETE (RG590: E3)
A-1159-781-A POWER BOARD, COMPLETE
(RG590: E2, E51, MX, AR)
A-1163-225-A POWER BOARD, COMPLETE (RG490: E3)
A-1163-226-A POWER BOARD, COMPLETE
(RG490: E2, E51, MX)
***********************
7-685-872-01 SCREW +BVTT 3X8 (S)
< CAPACITOR >
C402
1-107-726-91 CERAMIC CHIP
C403
C404
C405
1-137-749-11 MYLAR
1-137-749-11 MYLAR
1-135-928-21 ELECT
C405
1-137-840-11 ELECT
C405
1-137-841-11 ELECT
1-216-864-11 SHORT CHIP
1K
5%
1/10W
1K
5%
1/10W
1K
5%
1/10W
1K
5%
1/10W
(EXCEPT RG490/RG590: UK)
0 (RG490/RG590: UK)
C405
1-137-847-21 ELECT
R715
R716
R717
R718
R719
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C406
1-135-928-21 ELECT
C406
1-137-840-11 ELECT
C406
1-137-841-11 ELECT
R741
R742
R743
R744
R745
1-216-801-11
1-216-801-11
1-216-837-11
1-216-837-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
22
22
22K
22K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C406
1-137-847-21 ELECT
C409
1-127-811-11 ELECT
C409
1-135-515-21 ELECT
R746
R762
R763
R764
R765
1-216-829-11
1-216-841-11
1-216-825-11
1-216-841-11
1-216-841-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
47K
2.2K
47K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C410
1-127-811-11 ELECT
C410
1-135-515-21 ELECT
R766
R771
R772
R773
R774
1-216-825-11
1-216-821-11
1-216-833-11
1-216-821-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
1K
10K
1K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C411
1-162-964-11 CERAMIC CHIP
C411
1-162-970-11 CERAMIC CHIP
102
Remark
0.01uF
10%
16V
(RG590)
0.1uF
100V
0.1uF
100V
2200uF
20%
63V
(RG490: E3)
2200uF
20%
63V
(RG490: E2, E51, MX)
2200uF
20%
71V
(RG590: E2, E51, MX, AR)
2200uF
20%
71V
(RG590: UK, E3)
2200uF
20%
63V
(RG490: E3)
2200uF
20%
63V
(RG490: E2, E51, MX)
2200uF
20%
71V
(RG590: E2, E51, MX, AR)
2200uF
20%
71V
(RG590: UK, E3)
3300uF
20%
50V
(RG590: E2, E51, MX, AR)
3300uF
20%
50V
(RG590: UK, E3)
3300uF
20%
50V
(RG590: E2, E51, MX, AR)
3300uF
20%
50V
(RG590: UK, E3)
0.001uF 10%
50V
(EXCEPT RG490/RG590: UK)
0.01uF
10%
25V
(RG490/RG590: UK)
HCD-RG490/RG590
POWER
Ref. No.
Part No.
Description
Remark
C413
1-130-495-00 MYLAR
0.1uF
5%
C414
1-130-495-00 MYLAR
0.1uF
5%
C441
1-126-964-11 ELECT
10uF
20%
50V
(RG590)
50V
(RG590)
50V
C442
C443
C444
C445
C446
1-126-964-11
1-162-964-11
1-162-964-11
1-162-927-11
1-162-927-11
10uF
0.001uF
0.001uF
100PF
100PF
20%
10%
10%
5%
5%
50V
50V
50V
50V
50V
C447
1-126-965-11 ELECT
22uF
20%
C447
1-126-967-11 ELECT
47uF
20%
C448
1-126-965-11 ELECT
22uF
20%
C448
1-126-967-11 ELECT
47uF
20%
C451
1-136-165-00 FILM
0.1uF
5%
50V
(RG490)
50V
(RG590)
50V
(RG490)
50V
(RG590)
50V
(RG490)
C451
1-130-495-00 MYLAR
0.1uF
5%
C452
1-136-165-00 FILM
0.1uF
5%
C452
1-130-495-00 MYLAR
0.1uF
5%
C453
1-136-165-00 FILM
0.1uF
5%
C453
1-130-495-00 MYLAR
0.1uF
5%
C454
1-136-165-00 FILM
0.1uF
5%
C454
1-130-495-00 MYLAR
0.1uF
C459
1-104-987-11 MYLAR
0.001uF
C460
1-104-987-11 MYLAR
0.001uF
C461
1-128-562-11 ELECT
47uF
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
50V
(RG490)
5%
50V
(RG590)
5%
200V
(RG590: UK)
5%
200V
(RG590: UK)
20%
100V
(RG590)
C462
1-128-562-11 ELECT
47uF
20%
C463
1-104-655-91 ELECT
470uF
20%
C481
C486
C488
1-104-665-11 ELECT
1-126-961-11 ELECT
1-126-965-11 ELECT
100uF
2.2uF
22uF
20%
20%
20%
C489
1-128-552-51 ELECT
47uF
C490
1-128-576-11 ELECT
100uF
C491
1-165-621-11 CERAMIC CHIP
0.1uF
< CONNECTOR >
* CN441
1-573-087-11 PIN, CONNECTOR 13P
< DIODE >
D401
D402
6-501-234-01 DIODE GBJ10DB9
6-501-234-01 DIODE GBJ10DB9 (RG590)
50V
(RG590)
50V
(RG490)
50V
(RG590)
50V
(RG490)
50V
(RG590)
20%
100V
(RG590)
6.3V
(RG590)
25V
50V
50V
(RG490)
63V
(RG490)
20%
63V
(RG490)
50V
(RG590: UK)
Ref. No.
Part No.
Description
Remark
D441
D443
D444
8-719-000-07 DIODE MC2836
8-719-988-61 DIODE 1SS355TE-17
8-719-988-61 DIODE 1SS355TE-17 (RG590)
D445
D446
D481
D483
6-501-179-01
6-501-179-01
8-719-988-61
8-719-988-61
DIODE
DIODE
DIODE
DIODE
UDZW-TE17-16B (RG590)
UDZW-TE17-16B (RG590)
1SS355TE-17
1SS355TE-17 (RG490)
< IC >
IC441
IC441
6-600-169-01 IC STK412-240M-E (RG590)
6-600-221-01 IC STK403-130-E (RG490)
< TERMINAL BOARD>
JK441
1-694-785-11 TERMINAL BOARD (SPEAKER)
< COIL >
L441
L442
1-422-009-13 COIL, AIR-CORE
1-422-009-13 COIL, AIR-CORE
< TRANSISTOR >
Q441
Q442
Q481
Q482
Q483
6-551-268-01
6-551-268-01
8-729-120-28
8-729-120-28
8-729-120-28
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC5625
2SC5625
2SC1623-L5L6
2SC1623-L5L6
2SC1623-L5L6
Q484
Q485
Q486
Q487
Q488
8-729-120-28
8-729-600-22
8-729-120-28
8-729-120-28
8-729-901-87
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1623-L5L6
2SA1235-F
2SC1623-L5L6
2SC1623-L5L6
2SC2411K-CQ
Q489
Q490
Q491
6-551-268-01 TRANSISTOR
8-729-120-28 TRANSISTOR
6-551-270-01 TRANSISTOR
2SC5625
2SC1623-L5L6 (RG590)
2SA2026 (RG590)
< RESISTOR >
R401
R402
R403
1-216-845-11 METAL CHIP
1-216-845-11 METAL CHIP
1-216-845-11 METAL CHIP
100K
100K
100K
5%
5%
5%
R404
1-216-845-11 METAL CHIP
100K
5%
R405
1-216-845-11 METAL CHIP
100K
5%
R406
1-216-845-11 METAL CHIP
100K
5%
R407
R409
1-216-809-11 METAL CHIP
1-216-845-11 METAL CHIP
100
100K
5%
5%
R410
1-216-845-11 METAL CHIP
100K
5%
R411
1-216-797-11 METAL CHIP
10
5%
1/10W
(RG590)
1/10W
1/10W
(RG590)
1/10W
(RG590)
1/10W
R412
R413
R414
R415
R416
1-216-797-11
1-216-797-11
1-216-797-11
1-216-797-11
1-216-797-11
10
10
10
10
10
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R417
R418
1-216-809-11 METAL CHIP
1-216-809-11 METAL CHIP
100
100
5%
5%
1/10W
1/10W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1/10W
1/10W
1/10W
(RG590)
1/10W
(RG590)
1/10W
(RG590)
103
HCD-RG490/RG590
POWER
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
R419
R420
R421
1-216-809-11 METAL CHIP
1-216-797-11 METAL CHIP
1-216-797-11 METAL CHIP
100
10
10
5%
5%
5%
1/10W
1/10W
1/10W
R470
1-216-841-11 METAL CHIP
47K
5%
R471
1-216-845-11 METAL CHIP
100K
5%
R422
R423
R424
R425
R434
1-216-797-11
1-216-797-11
1-216-797-11
1-216-797-11
1-216-864-11
10
10
10
10
0 (RG490)
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
R472
1-216-845-11 METAL CHIP
100K
5%
R473
1-216-841-11 METAL CHIP
47K
5%
R474
1-216-825-11 METAL CHIP
2.2K
5%
R435
R436
1-216-864-11 SHORT CHIP
1-216-837-11 METAL CHIP
0 (RG490)
22K
5%
R475
1-216-833-11 METAL CHIP
10K
5%
R439
1-216-833-11 METAL CHIP
10K
5%
R476
1-216-837-11 METAL CHIP
22K
5%
R440
R441
1-216-837-11 METAL CHIP
1-216-825-11 METAL CHIP
22K
2.2K
5%
5%
1/10W
(RG590)
1/10W
(RG590)
1/10W
1/10W
1-212-881-11 FUSIBLE
100
5%
R478
1-216-833-11 METAL CHIP
10K
5%
R442
R443
R444
R445
R446
1-216-825-11
1-216-841-11
1-216-841-11
1-216-821-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
47K
47K
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R479
1-216-833-11 METAL CHIP
10K
5%
R447
R448
0 R449
1-216-841-11 METAL CHIP
1-216-841-11 METAL CHIP
1-212-974-00 FUSIBLE
47K
47K
47
5%
5%
5%
1-216-845-11
1-216-829-11
1-216-833-11
1-216-801-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
4.7K
10K
22
5%
5%
5%
5%
0 R449
1-220-893-11 METAL
0.22
10%
0 R450
1-220-893-11 METAL
0.22
10%
1/10W
1/10W
1/2W F
(RG490)
5W F
(RG590)
5W F
(RG590)
R480
R481
R482
R483
1/10W
(RG590)
1/10W
1/10W
1/10W
1/10W
R484
R485
R486
R487
R488
1-216-845-11
1-216-845-11
1-216-845-11
1-216-841-11
1-216-837-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100K
47K
22K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
0 R451
1-220-893-11 METAL
0.22
10%
R490
R491
1-216-829-11 METAL CHIP
1-216-833-11 METAL CHIP
4.7K
10K
5%
5%
0 R452
1-220-893-11 METAL
0.22
10%
R491
1-216-841-11 METAL CHIP
47K
5%
R453
R454
R455
1-216-797-11 METAL CHIP
1-216-797-11 METAL CHIP
1-216-821-11 METAL CHIP
10
10
1K
5%
5%
5%
R492
1-216-821-11 METAL CHIP
1K
5%
R492
1-216-841-11 METAL CHIP
47K
5%
R456
R457
R458
R459
1-216-821-11
1-216-837-11
1-216-837-11
1-216-841-11
1K
22K
22K
47K
5%
5%
5%
5%
1/10W
1/10W
(RG490)
1/10W
(RG590)
1/10W
(RG490)
1/10W
(RG590)
R493
1-216-841-11 METAL CHIP
47K
5%
R459
1-216-845-11 METAL CHIP
100K
5%
1-216-864-11
1-216-864-11
1-202-972-61
1-212-881-11
0 (RG590)
0 (RG590)
1
5%
100
5%
1/4W F
1/4W F
100K
1K
1K
1/10W
1/10W
1/10W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
R460
1-216-841-11 METAL CHIP
47K
5%
R460
1-216-845-11 METAL CHIP
100K
5%
R461
R462
R463
1-216-797-11 METAL CHIP
1-216-797-11 METAL CHIP
1-216-841-11 METAL CHIP
10
10
47K
5%
5%
5%
R464
1-216-845-11 METAL CHIP
100K
5%
R465
R466
0 R467
1-216-841-11 METAL CHIP
1-216-845-11 METAL CHIP
1-215-871-11 METAL OXIDE
47K
100K
2.2K
5%
5%
5%
0 R468
1-215-871-11 METAL OXIDE
2.2K
5%
1-216-841-11 METAL CHIP
47K
5%
R469
104
5W F
(RG490)
5W F
(RG490)
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
1/10W
(RG490)
1/10W
(RG590)
1/10W
(RG490)
1/10W
(RG590)
1/10W
1/10W
1/10W
(RG590)
1/10W
(RG590)
1/10W
1/10W
1W F
(RG590)
1W F
(RG590)
1/10W
(RG590)
0 R477
R493
R494
0 R495
0 R496
R497
R498
R499
SHORT CHIP
SHORT CHIP
FUSIBLE
FUSIBLE
1-216-845-11 METAL CHIP
1-216-821-11 METAL CHIP
1-216-821-11 METAL CHIP
5%
5%
5%
1/10W
(RG590)
1/10W
(RG590)
1/10W
(RG590)
1/10W
(RG590)
1/10W
(RG590)
1/10W
(RG590)
1/10W
(RG590)
1/4W F
(RG590)
1/10W
(RG590)
1/10W
(RG490)
< RELAY >
RY441
RY441
1-755-307-11 RELAY (RG490)
1-755-372-11 RELAY (RG590)
< THERMISTOR >
TH441 1-807-796-11 THERMISTOR
************************************************************
HCD-RG490/RG590
SENSOR
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
< CONNECTOR >
1-785-329-21 PIN, CONNECTOR (LIGHT ANGLE) 3P
< IC >
IC731
6-600-022-01 IC RPI-576
************************************************************
A-1159-815-A SUB WOOFER BOARD, COMPLETE (RG590)
A-1178-854-A SUB WOOFER BOARD, COMPLETE (RG490)
****************************
< CAPACITOR >
C502
C503
C504
C505
C506
1-162-960-11
1-162-968-11
1-104-662-91
1-162-915-11
1-104-665-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
ELECT
220PF
0.0047uF
22uF
10PF
100uF
10%
10%
20%
0.5PF
20%
50V
50V
25V
50V
25V
C507
C508
C509
C510
C511
1-126-967-11
1-164-230-11
1-128-563-11
1-128-582-11
1-128-582-11
ELECT
CERAMIC CHIP
ELECT
ELECT
ELECT
47uF
220PF
100uF
10uF
10uF
20%
5%
20%
20%
20%
50V
50V
100V
100V
100V
C512
C513
C514
C516
C517
1-136-165-00
1-136-165-00
1-126-948-11
1-126-964-11
1-126-964-11
FILM
FILM
ELECT
ELECT
ELECT
0.1uF
0.1uF
100uF
10uF
10uF
5%
5%
20%
20%
20%
50V
50V
35V
50V
50V
< CONNECTOR >
CN501
CN502
CN503
1-815-444-11 PIN, CONNECTOR (PWB) 3P
1-819-134-11 PIN, CONNECTOR 6P
1-819-132-11 PIN, CONNECTOR 4P
< DIODE >
D501
D502
D503
D504
D507
6-501-176-01
8-719-988-61
8-719-988-61
8-719-988-61
8-719-988-61
DIODE
DIODE
DIODE
DIODE
DIODE
UDZW-TE17-12B
1SS355TE-17
1SS355TE-17
1SS355TE-17
1SS355TE-17
1-216-841-11
1-216-841-11
1-216-821-11
1-216-841-11
1-215-873-00
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL OXIDE
47K
47K
1K
47K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1W F
0 R505
(RG590)
0 R506
0 R507
0 R508
0 R509
1-215-896-00 METAL OXIDE
4.7K
5%
2W
F
1-202-972-61
1-215-873-00
1-215-873-00
1-212-881-11
FUSIBLE
METAL OXIDE
METAL OXIDE
FUSIBLE
1
4.7K
4.7K
100
5%
5%
5%
5%
1/4W
1W
1W
1/4W
F
F
F
F
0 R510
0 R511
R512
R513
R514
1-220-893-11
1-220-893-11
1-216-797-11
1-216-821-11
1-216-837-11
METAL
METAL
METAL CHIP
METAL CHIP
METAL CHIP
0.22
0.22
10
1K
22K
10%
10%
5%
5%
5%
5W F
5W F
1/10W
1/10W
1/10W
R515
R516
R517
R518
R520
1-216-841-11
1-216-809-11
1-216-833-11
1-216-833-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
47K
100
10K
10K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R521
R522
R523
R524
R525
1-216-809-11
1-216-809-11
1-216-809-11
1-216-841-11
1-216-797-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
47K
10
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R526
R527
R529
R530
R531
1-216-797-11
1-216-797-11
1-216-825-11
1-216-837-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10
10
2.2K
22K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
1-216-837-11 METAL CHIP
1-216-837-11 METAL CHIP
1-202-972-61 FUSIBLE
22K
22K
1
5%
5%
5%
1/10W
1/10W
1/4W F
R532
R533
0 R534
< RELAY >
RY501 1-755-307-11 RELAY
************************************************************
< SWITCH >
6-600-091-01 IC STK404-130S
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
Remark
1-687-669-12 SW BOARD
*********
< JUMPER RESISTOR >
JR501
JR502
Description
SW-SP
R501
R502
R503
R504
0 R505
(RG490)
< IC >
IC501
SW
< RESISTOR >
1-687-132-12 SENSOR BOARD
*************
CN731
SUB WOOFER
0
0
S751
1-786-514-31 SWITCH, LEVER (SLIDE)
(DISC TABLE OPEN/CLOSE DETECT)
************************************************************
SW-SP BOARD
************
< TRANSISTOR >
Q501
Q502
Q503
Q505
Q506
6-551-268-01
8-729-600-22
8-729-120-28
8-729-120-28
8-729-120-28
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC5625
2SA1235-F
2SC1623-L5L6
2SC1623-L5L6
2SC1623-L5L6
Q507
8-729-120-28 TRANSISTOR
2SC1623-L5L6
< TERMINAL BOARD>
JK501
1-780-242-11 TERMINAL BOARD, PUSH (ANTENNA) 2P
(SUB WOOFER OUT)
************************************************************
105
HCD-RG490/RG590
TRANSFORMER
Ref. No.
Part No.
VIDEO OUT
Description
Remark
A-1159-798-A TRANSFORMER BOARD, COMPLETE
(RG590: UK)
A-1159-799-A TRANSFORMER BOARD, COMPLETE
(RG590: E2, E3, E51)
A-1159-802-A TRANSFORMER BOARD, COMPLETE
(RG590: AR)
A-1159-803-A TRANSFORMER BOARD, COMPLETE
(RG590: MX)
A-1163-243-A TRANSFORMER BOARD, COMPLETE
(RG490: E2, E3, E51)
Ref. No.
Part No.
Description
Remark
R910
(EXCEPT RG490: MX/RG590: MX)
1-216-864-11 SHORT CHIP
0 (RG490: MX/RG590: MX)
R911
R914
1-216-864-11 SHORT CHIP
1-216-833-11 METAL CHIP
0
10K
5%
1/10W
< RELAY >
0 RY901
0 RY901
A-1163-247-A TRANSFORMER BOARD, COMPLETE
(RG490: MX)
*****************************
1-755-276-11 RELAY, POWER (RG490: MX/RG590: MX)
1-755-334-11 RELAY, AC POWER
(EXCEPT RG490: MX/RG590: MX)
< SWITCH >
0 S901
1-786-055-31 SELECTOR, VOLTAGE (VOLTAGE SELECTOR)
(RG490: E2, E3, E51/RG590: E2, E3, E51)
************************************************************
1-533-233-31 FUSE HOLDER
< CAPACITOR >
C907
1-136-165-00 FILM
0.1uF
5%
C907
1-130-495-00 MYLAR
0.1uF
5%
C908
C909
C910
1-128-553-11 ELECT
1-126-964-11 ELECT
1-126-968-11 ELECT
220uF
10uF
100uF
20%
20%
20%
C911
C914
1-126-942-61 ELECT
1-162-964-11 CERAMIC CHIP
1000uF
0.001uF
20%
10%
50V
(RG490)
50V
(RG590)
63V
50V
50V
VIDEO OUT BOARD (RG490: MX/RG590: MX)
****************
< CAPACITOR >
C803
1-100-566-91 CERAMIC CHIP
0.1uF
10%
25V
< JACK >
25V
50V
(RG590)
J803
1-774-227-11 JACK, PIN 1P (VIDEO OUT)
************************************************************
< CONNECTOR >
* CN901
CN903
CN905
CN907
1-793-660-11
1-819-131-11
1-819-133-11
1-819-139-11
MISCELLANEOUS
**************
PIN, CONNECTOR (PC BOARD) 3P
PIN, CONNECTOR 3P (RG490)
PIN, CONNECTOR 5P (RG590)
PIN, CONNECTOR 11P
5
61
62
158
168
< DIODE >
D901
D902
D903
D904
D905
8-719-988-61
6-500-522-21
6-500-522-21
6-500-522-21
6-500-522-21
DIODE
DIODE
DIODE
DIODE
DIODE
1SS355TE-17
10EDB40-TB3
10EDB40-TB3
10EDB40-TB3
10EDB40-TB3
D906
D908
D910
D910
6-501-184-01
6-500-522-21
6-500-335-01
8-719-000-08
DIODE
DIODE
DIODE
DIODE
UDZW-TE17-27B
10EDB40-TB3
MC2838-T112-1 (RG590: AR)
MC2838 (EXCEPT RG590: AR)
168
204
204
205
205
206
208
< TRANSFORMER >
0 PT902
0 PT902
0 PT902
1-443-927-11 TRANSFORMER, POWER
(RG490: MX/RG590: MX)
1-443-928-11 TRANSFORMER, POWER
(EXCEPT RG490: MX/RG590: UK, MX)
1-443-929-11 TRANSFORMER, POWER (RG590: UK)
208
303
0 306
0 306
< TRANSISTOR >
Q902
8-729-048-66 TRANSISTOR
0 306
0 306
309
502
2SB1238-PQR-TV2
< RESISTOR >
R903
R904
0 R908
R910
106
1-216-833-11
1-216-821-11
1-202-972-61
1-216-801-11
METAL CHIP
METAL CHIP
FUSIBLE
METAL CHIP
10K
1K
1
22
5%
5%
5%
5%
1/10W
1/10W
1/4W F
1/10W
576
0 579
1-828-975-21 WIRE (FLAT TYPE) (13 CORE)
(RG490: MX/RG590: MX)
1-831-952-21 CABLE, FLEXIBLE FLAT (19 CORE)
1-831-779-21 CABLE, FLEXIBLE FLAT (11 CORE)
1-417-656-21 MECHA DECK (CWN42FF609)
1-831-772-21 CABLE, FLEXIBLE FLAT (9 CORE)
(RG490: E3/RG590: UK, E3)
1-831-789-21 CABLE, FLEXIBLE FLAT (13 CORE) (RG490: E2,
E51, MX/RG590: E2, E51, MX, AR)
1-693-711-11 TUNER (FM/AM) (EXCEPT RG590: UK)
1-693-712-11 TUNER (FM/AM) (RG590: UK)
1-831-619-21 CABLE, FLEXIBLE FLAT (11 CORE) (RG590: UK)
1-831-769-21 CABLE, FLEXIBLE FLAT (9 CORE)
(EXCEPT RG590: UK)
1-831-786-21 CABLE, FLEXIBLE FLAT (13 CORE)
1-831-771-21 CABLE, FLEXIBLE FLAT (23 CORE) (RG490: E2,
E3, E51/RG590: UK, E2, E3, E51, AR)
1-832-043-21 CABLE, FLEXIBLE FLAT (31 CORE)
(RG490: MX/RG590: MX)
1-831-928-21 CABLE, FLEXIBLE FLAT (11 CORE)
1-769-744-81 CORD, POWER (RG590: UK)
1-827-226-31 CORD, POWER (RG490: E2, E3, MX/
RG590: E2, E3, MX)
1-829-387-11 CORD, POWER (RG590: AR)
1-830-188-11 CORD, POWER (RG490: E51/RG590: E51)
1-500-868-11 CORE, FERRITE (RG490: MX/RG590: MX)
1-828-938-51 WIRE (FLAT TYPE) (5 CORE)
1-832-404-21 CABLE, FLEXIBLE FLAT (16 CORE)
8-820-244-01 OPTICAL PICK-UP BLOCK
(KSM-215DCP/C2NP) (MX)
HCD-RG490/RG590
Ref. No.
Part No.
0 579
A-4735-357-A OPTICAL PICK-UP BLOCK (KSM-213D)
(EXCEPT MX)
1-471-035-21 MAGNET ASSY
1-532-506-33 FUSE (T6.3AL/250V) (RG590)
580
0 F904
0 F904
0 F905
0 F905
0 F906
0 F907
0 F908
0 F909
M001
M741
M751
0 PT901
0 PT901
0 PT901
0 PT901
0 PT901
Description
Remark
Ref. No.
Part No.
Description
Remark
1-533-949-33 FUSE, CYLINDRICAL (TIME LUG) (T8AL/250V)
(RG490)
1-532-506-33 FUSE (T6.3AL/250V) (RG590)
1-533-949-33 FUSE, CYLINDRICAL (TIME LUG) (T8AL/250V)
(RG490)
1-532-465-33 FUSE (T3.15AL/250V)
1-532-465-33 FUSE (T3.15AL/250V)
1-533-949-33 FUSE, CYLINDRICAL (TIME LUG) (T8AL/250V)
(RG590)
1-533-949-33 FUSE, CYLINDRICAL (TIME LUG) (T8AL/250V)
(RG590)
1-787-344-11 FAN, DC
A-1108-965-A MOTOR ASSY, TABLE
A-1108-966-A MOTOR ASSY, LOADING
1-443-922-11
1-443-932-11
1-443-933-11
1-443-935-11
TRANSFORMER, POWER (RG590: UK)
TRANSFORMER, POWER (RG490: MX)
TRANSFORMER, POWER (RG590: MX)
TRANSFORMER, POWER
(RG590: E2, E3, E51, AR)
1-443-937-11 TRANSFORMER, POWER (RG490: E2, E3, E51)
S101
S711
1-771-853-11 SWITCH, DETECTION (LIMIT)
1-477-680-12 ENCODER, ROTARY
(DISC TABLE ADDRESS DETECT)
************************************************************
ACCESSORIES
************
0
0
0
1-569-007-12 ADAPTOR, CONVERSION 2P (E3)
1-569-008-32 ADAPTOR, CONVERSION 2P (E51)
1-770-019-61 ADAPTOR, CONVERSION PLUG (UK)
107
HCD-RG490/RG590
REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the upper right on the revised page allows you to jump to the next revised
page.
2
Ver.
Date
1.0
2006.02
Description of Revision
New