Download Operator Handbook

www.WorkshopManuals.co.uk
SPECIFICATION
185
www.maskinisten.net
185
NOISE AND VIBRATION DATA
The noise data below only applies to CE marked machines.
NOISE
1 Noise Level at Operator's Ear (LpA)
2 External Noise Level Guaranteed
Sound Power Level (LwA)
VIBRATION
3 Weighted rms acceleration : Whole Body (m/s2)
4 Weighted rms acceleration : Hand/Arm (m/s2)
79
104
1.54
1.47
Item 1 above determined in accordance with dynamic test conditions defined in ISO 6396.
Item 2 above is determined in accordance with dynamic test conditions defined in 2000/14/EC (Annex 5, 6 procedure 1).
Item 3 above is an "Average Equivalent Value" determined from measurement on machines performing typical duties
detailed below, with values weighted in accordance with ISO 2631.
Item 4 above measured at the steering control device when machine is travelling over an irregular "Quarry floor" surface, with
values weighted in accordance with ISO 2631.
The Vibration values are determined from measurements in three perpendicular planes.
Values determined with standard shovel and excavator bucket fitted.
For information relating to this machine when used with other JCB approved attachments, please refer to the literature
accompanying the attachments.
Typical Duties for machine:
Roading (Tarmac)
Roading (Rough Terrain)
Excavating
Loading cycles
8800 - 1
Purchased from www.WorkshopManuals.co.uk