Download Kawasaki Engine Service Manual

3-26 FUEL SYSTEM
Carburetor
FR651V, FR691V, FS651V, FS691V Models
Refer to the illustration shown for disassembly and assembly.
There are several passage plugs (ball plugs) in the carburetor body. Do not remove.
Before disassembly, mark the out side of choke and throttle valves for assembling them.
Install the choke valve and throttle valve on the shaft as
the out side mark of them facing out side.
Drive the float pin into the carburetor body.
Assemble carburetor parts with recommended tightening
torque (see Exploded View).
1. Pilot Screw Plug
2. Pilot Screw
3. Spring
4. Low Idle Speed Screw
5. Spring
6. Screws
7. Throttle Valve
8. Screw
9. Throttle Lever
10. Throttle Shaft
11. Dust Seal
12. Choke Valve
13. Choke Shaft
14. Dust Seal
15. Solenoid Valve
16. Gasket
17. Float Chamber
18. Gasket
19. Float Pin
20. Float
21. Main Jet
22. Main Nozzle
23. Float Valve
•
•
•
•
•
•