Download Intimidator Scan 300 Quick Reference Guide, Rev. 1 Multi

EN
Intimidator™ Scan LED 300 QRG
What Is
Included
To Begin
Product
Description
• Intimidator™ Scan LED 300
• Hanging Bracket with Mounting
Hardware (preinstalled)
• Power Cord
• Warranty Card
• Quick Reference Guide
Unpack your Intimidator™ Scan LED 300 and make sure you have
received all parts in good condition. If the box or contents appear damaged,
notify the carrier immediately, not CHAUVET®.
The Intimidator™ Scan LED 300 is a compact, bright LED scanner with a
3-sided prism that duplicates the beam for great effects over a large
coverage area. Power linking saves time running cords, and built-in soundactivated programs dance to the beat of the music.
Product Overview
DMX In/Out
Voltage Switch
Power In
Power Out
Fuse Holder
AC Power
Power Linking
Fuse Replacement
This product has a switchable power supply that can work with an input
voltage of 115 VAC or 240 VAC, 50/60 Hz.
You can link up to 3 Intimidator™ Scan LED 300 products at 120 VAC and
7 units at 230 VAC.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight
out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
3