Download Intimidator Scan 300 Quick Reference Guide, Rev. 1 Multi

Transcript
EN
Intimidator™ Scan LED 300 QRG
Menu Options
Menu
Programming Steps
Description
DMX Mode
d001
Standalone
Mode
NASL
Pan Invert
PAN
rPAN
Pan invert
Tilt Invert
tit
rtit
Tilt invert
Display Invert
diS
rdiS
DMX
Personality
11CH
8CH
11CH
d001~512
NASL
SLAu
SoN
NStS
SrUn
NAFA
FASt
Reset
rESt
Load Default
LoAd
DMX Linking The
DMX starting address
Standalone: Slave receive mode
Standalone: Slow
Standalone: Sound-active
Invert the display
8-channel DMX personality
11-channel DMX personality
Reset all motors to correct any errors
with motors misaligning during
operation
Revert all settings back to the factory
default
Intimidator™ Scan LED 300 can work with a DMX controller when
linked by DMX serial connections. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you
are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com.
Starting Address To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 502.
Master/Slave The Intimidator™ Scan LED 300 uses the DMX data connection for its
mode. Instructions for connecting and configuring this product
Connection Master/Slave
for Master/Slave operation are in the User Manual.
5