Download XJOY 37

10596
Figure 3
After removing the shell, stand the ADV vertically, unscrew the ring nut (11), and extract
the battery (14) pulling it upwards off the rod (13). (see fig. 3) when the battery is
completely extract disconnect the red connector.
4.3 RECHARGING THE BATTERY
To recharge the battery, extract the battery (14) from the
ADV (see fig. 7), put it in a safe place away from people
and flammable objects. Unscrew the charger connector
cap (24) and connect the charge connector (26) to the
battery charger (see battery charger instructions). Next
connect the battery charger power cord to the mains.
When charged, disconnect the battery charge and close
the connector (26) cap (24) and insert the battery in the
ADV.
Figure 4
4.4 INSERTING THE BATTERY
With the ADV in vertical position, repeat the battery extraction procedure in
reverse order, being careful to insert the anti-rotation pin (16) in the battery
hole. (see fig. 5)
TO ENSURE YOUR USER INFORMATION IS UP TO DATE PLEASE DOWNLOAD THE LATEST VERSION OF THIS MANUAL FROM WWW.SUEX
Page 9 of 43