Download Super T-Max

Transcript
La selezione normale consente la sostituzione del solo pistone senza nessuna variazione ai cilindri
(verificare preventivamente che la canna non sia danneggiata, ovalizzata o rigata).
Nel caso in cui la canna del cilindro non risulti conforme è possibile inserire i pistoni maggiorati, dopo
averla adeguatamente lappata, rispettando scrupolosamente le misure indicate in tabella.
4 Stroke Valve - Caratteristiche tecniche
Valvole di aspirazione:
• Ø maggiorato da 25 mm a 26.5 mm
• Acciaio specifico per valvole aspirazione ad alte prestazioni
• Estremità dello stelo temprata per offrire massima resistenza e durata della zona di contatto
• Valvola interamente rettificata
The normal piston size is intended to replace the original piston without any need for cylinder modifications.
(Verify that the cylinder is not damaged, ovalized or scored).
The over-sized piston is intended to be used with a modified cylinder sleeve, which has been honed to the
dimensions indicated in the above table.
4 Stroke Valve - Technical specifications
Intake valves:
• Bigger Ø from 25 mm to 26.5 mm
• Special steel for high performance valves
• Hardened stem tip to ensure highest resistance and life of the contact area
• Completely refaced valve
La sélection normale convient pour la substitution du seul piston sans aucunes modifications aux cylindres
(vérifier préventivement que la chemise n’est pas ovalisée, striée ou bien endommagée).
Dans le cas ou la chemise n’est pas conforme il est possible de monter des pistons de côtes supérieures,
après avoir dûment rectifié les cylindres, en respectant scrupuleusement les mesures indiquées dans
le tableau.
4 Stroke Valve - Caractéristiques techniques
Soupapes d’admission :
• Ø majoré de 25 mm à 26.5 mm
• Acier spécifique pour soupapes d’admission à hautes performances
• Extrémité du tige trempée pour avoir le maximum de résistance et durée de la partie de contact
- 11 -