Download GB - Jacobsen

3
SAFETY INSTRUCTIONS
GB
JACOBSEN FAIRWAY 405 Series CH
SAFETY AND OPERATORS MANUAL
DANGER - Indicates an imminently hazardous
situation which, if not avoided, WILL result in death
or serious injury.
IMPORTANT: Transport speed is for highway
use only. Never select transport speed on grass
areas or uneven or unsurfaced roads or tracks.
WARNING - Indicates a potentially hazardous
situation which, if not avoided, COULD result in
death or serious injury.
The operating Instructions for the Cutting Units are
contained in a separate Publication .
CAUTION - Indicates a potentially hazardous
situation which, if not avoided, MAY result in minor
or moderate injury and property damage. It may
also be used to alert against unsafe practices.
WARNING
WARNING
Hydraulic Fluid escaping under pressure
can penetrate skin and do serious
damage. Immediate medical assistance
must be sought.
WARNING
Batteries produce explosive gases and
contain corrosive acid and supply levels
of electrical current high enough to cause
burns.
California Proposition 65
Engine Exhaust, some of its constituents,
and certain vehicle components contain
or emit chemicals known to the state of
California to cause cancer and birth
defects or other reproductive harm.
WARNING
DO NOT USE ON SLOPES GREATER THAN 15°
WARNING
Before releasing transport latches it is
important that all cutting units are fully
raised.
1. Park the machine on level ground.
2. With the engine running at operating
speed raise the cutting units to their
maximum position by operating lift
levers whilst seated in the driving
position.
3. Disengage drives, stop the engine and
make sure all moving parts are
stationary. Apply brakes and remove
the starter key.
4. transport latches can now be released.
GB-5