Download STARDRAPE W

STARDRAPE W
7
- 2 - INSTALLATION
2.1 MOUNTING
To mounting the STARDRAPEW stable mounting clips are required. The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly regarding safety) currently in force in the country in which the fixture’s being used.
• Unfold the STARDRAPEW on a flat surface.
• Lift and hang up the STARDRAPEW on a structure/truss through the use of special clamps, sliding inside
the rings present on the entire perimeter of the LED curtain.
• Use the velcro on the left and right side of the curtains to connect multiple curtains together.
Reusable zip ties
Supporting truss
Signal cable
Fig.2