Download SlimPAR HEX 6 IRC Quick Reference Guide Rev. 3 Multi

EN
SlimPAR HEX 6 IRC QRG
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
Navigates upwards through the menu list and increases the
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
<UP>
Menu Options
Main Function
Programming Levels
Static Colors
Auto Programs
Program Speed
6-CH
8-CH
12CH
C-P-S--
Sound-Active Mode
Snd
Sound Sensitivity
SenS
Custom Color Mixing
U--
Dimmer
dIM
Infrared
SET
DMX Personalities
and Starting Address
d 1–d512
C 1–C 63
P 1–P 4
S 1–S100
Snd1
Snd2
u 0–u100
r 0–r255
g 0–g255
b 0–b255
A 0–A255
W 0–W255
P 0–P255
OFF
dIM1
dIM2
dIM3
On
OFF
Description
Selects DMX personality and
starting address
Selects static color
Selects auto program
Selects auto program speed (slow to fast)
Selects Sound-Active program (6-color)
Selects Sound-Active program (63-color)
Sets sound sensitivity
Red (0–100%)
Green (0–100%)
Blue (0–100%)
Amber (0–100%)
White (0–100%)
Ultraviolet (0–100%)
Dimmer, off
Dimmer, fast speed
Dimmer, medium speed
Dimmer, slow speed
Turns infrared on or off
DMX Linking The SlimPAR HEX 6 IRC can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
Starting
Address
Master/Slave
Connection
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 501.
The SlimPAR HEX 6 IRC uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product
for Master/Slave operation are in the User Manual.
5