Download ESCANER

System Configuration
Scanner Configuration Control Panel
Every time SCAN-FIT® is started, a check is performed in order to verify the software and hardware settings. If an
error is detected, the dialog box of the Configuration Control Panel will be shown
Depending on the errors detected, some items will be active:
EDIT button: it opens up a dialog box to solve the issue detected. See System Configuration Check List
FACTORY DEFAULT button: reload the default SCAN-FIT® Calibration file
REFRESH button: update the configuration status
DISABLE SCANNER: the SCAN-FIT® software is started but the acquisition commands are disabled
EXIT: exit from Dscan Application
System Configuration Check List
SCAN-FIT® requires to change some of the Operative System settings in order to run properly. The ScanSuite
setup performs this operation automatically. If required, it is possible to modify them manually.
User Access Control (UAC)
The User Access Control (UAC) needs to be disabled