Download NOTA

Transcript
Cleaning silencer
1. Silencer cover.
2. Silencer.
3. Two bolts.
4. Hexagonal wrench.
Œ Remove silencer cover.
Œ Clean deposits from silencer and tighten two bolts.
Œ Install silencer cover.
Angle transmission
NOTE
Use good-quality lithium multi grease.
1. Angle transmission.
2. Plug (bolt).
3. Drain screw.
Œ Remove the plug and drain screw from the angle transmission.
Œ Add grease into the transmission until old grease is pushed out.
If necessary, use a low pressure pump.
Œ Reinstall the drain screw and plug.
24