Download OPERATORLS MANUAL - Troy-Bilt
Transcript
6 Maintenance & Adjustments Maintenance Schedule Check After first 2 hours Change after first 2 hours Check Motor Oil Level Clean Engine Check Nuts and Bolts Before each use Every 5 Hours P P P P Change Motor Oil Every 10 Hours Every 30 Hours P P P P P Lubricate Tiller P Service Engine Air Cleaner System P P Check Tines for Wear Check Air Pressure in Tires P Service Spark Plug Warning! Before inspecting, cleaning or servicing the machine, shut off the engine, wait for all moving parts to come to a complete stop, disconnect the spark plug wire and move the wire away from the spark plug. Failure to follow these instructions can result in serious personal injury or property damage. Maintenance Engine Refer to the Engine Operator’s Manual packed with your tiller for all engine maintenance. Tire Pressure Check the air pressure in both tires. The air pressure should be between 15-20 PSI. See Engine Manual Hardware Check for loose or missing hardware after every 10 operating hours and tighten or replace (as needed) before using tiller Be sure to check the screws underneath the tiller hood that secure the transmission cover and the Depth Regulator Lever to the transmission. Air Filter The air cleaner filters dirt and dust out of the air before it enters the carburetor. Operating the engine with a dirty, clogged air filter can cause poor performance and damage to the engine. Never operate the engine without the air cleaner installed. Inspect and service the air cleaner more often if operating in very dusty or dirty conditions. Refer to the Engine Operator’s Manual for air cleaner service intervals and instructions. Keep both tires equally inflated to help prevent machine from pulling to one side. 15