Download Jumpstarter - PowerStation

WARNING INFORMATION
continued
GENERAL BOOSTER CABLE INSTRUCTIONS FOR JUMPSTARTING AN
ENGINE (THESE INSTRUCTIONS ARE NOT INTENDED DIRECTLY FOR
USE WITH THE PSX3) (continued):
4. Connect the other end of the positive (+) cable clamp to the positive terminal
of the booster battery.
5. Connect the negative (-) cable clamp to the other terminal (negative) of
booster battery.
6. Make the final connection of the negative (-) cable clamp on the engine block
of the discharged vehicle away from the battery. Do not connect the negative
clamp to the negative terminal of the discharged battery.
7. Start the vehicle and remove the cables in the reverse order of connection
(the engine block (black) connection is the first to disconnect).
031413
PSX3 Owners Manual Page 4