Download important safety instructions

Dose adjustment
Concentration
1
0,25 %
2
1,00 %
3
1,25 %
4
1,50 %
5
1,75 %
6
2,00 %
Note
Recommended value at maximum working
pressure.
Figure 8
Î Take out detergent suck hose.
Î By turning the filter the detergent can be
dosed roughly.
Cleaning
Î set pressure/temperature and detergent
concentration according to the surface to
be cleaned.
Note
To prevent damage due to too much pressure, always position high pressure ray first
from a greater distance towards object to be
cleaned.
Working with the high pressure nozzle
The spray angle is essential for the effectiveness of the high pressure ray. Normally work
is performed with a 25° flat ray nozzle (included).
Recommended nozzles are deliverable as
accessories
– For strong contaminations
0° full ray - nozzle
– For sensitive surfaces and light contaminations
40° flat ray - nozzle
– For thick layered, persistent contaminations
Dirt grinder
– Nozzle with adjustable spray angle, for
adaption to different cleaning tasks
Angle-Vario-Nozzle
Recommended cleaning method
– Loosen the dirt:
Î Spray detergent economically and let it
work for 1...5 minutes but do not let it dry
up.
– Remove the dirt:
Î Spray off loosened dirt with the highpressure ray.
Operating with cold water
Removal of light contaminations and clear
rinse, i.e.: Gardening tools, terrace, tools,
etc.
Î Set operating pressure according to
need.
Î Set the appliance switch to "I".
Operating with hot water
 Danger
Scalding danger!
Î Set device switch to desired temperature.
We recommend the following cleaning temperatures:
– Light contaminations
86 °F/30 °C-122 °F/50 °C
– Contaminations containing protein, i.e. in
the food processing industry
max. 140 °F/60 °C
– Vehicle cleaning, machine cleaning
140 °F/60 °C-194 °F/90 °C
Operating with steam
 Danger
Scalding danger! The operating pressure
must not exceed 3,2 MPa (32 bar) when operating with temperatures above 208 °F/
98 °C.
Therefore the following measures must definitely be performed:
English
11