Download STIHL MS 341, 361

English / USA
4
4
:
Remove the tensioning gear (4)
and turn it over.
8
:
Position the tensioning gear (4)
against the guide bar (6) so that the
stud (7) projects through the upper
hole and the short guide peg (8)
locates in the lower hole.
5
133BA028 KN
4
133BA030 KN
:
5
Unscrew the nut (5).
:
28
Screw the nut (5) on to the stud as
far as stop.
133BA031 KN
133BA027 KN
6
133BA029 KN
7
Wear work gloves to protect your
hands from the sharp cutters.
:
Fit the chain – start at the bar nose.
Pay attention to the position of the
tensioning gear and the cutting
edges.
:
Turn the tensioning gear (4)
clockwise as far as stop.
MS 341, MS 361, MS 361 C