Download warning! - Datatail

English
© ANDREAS STIHL AG & Co. KG, 2011
0458-456-8621-A. M13.F11.CP.
0000004571_003_GB
Printed on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
Original Instruction Manual
Contents
Guide to Using this Manual
Safety Precautions and Working
Techniques
Assembling the Unit
Adjusting the Throttle Cable
Fitting the Harness
Fuel
Fueling
Information Before You Start
Starting / Stopping the Engine
Operating Instructions
Replacing the Air Filter
Engine Management
Adjusting the Carburetor
Spark Plug
Engine Running Behavior
Replacing the Starter Rope and
Rewind Spring
Storing the Machine
Inspections and Maintenance by
Dealer
Maintenance and Care
Main Parts
Specifications
Special Accessories
Maintenance and Repairs
STIHL Incorporated Federal
Emission Control Warranty
Statement
STIHL Incorporated California
Exhaust and Evaporative
Emissions Control Warranty
Statement
2
2
10
13
13
14
15
15
16
18
19
19
20
21
22
22
24
25
26
28
30
31
32
Trademarks
36
Allow only persons who fully understand
this manual to operate your blower.
To receive maximum performance and
satisfaction from your STIHL blower, it is
important that you read, understand and
follow the safety precautions and the
operating and maintenance instructions
in chapter "Safety Precautions and
Working Techniques" before using your
blower. For further information you can
go to www.stihlusa.com.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
Warning!
Because a blower is a high-speed tool,
some special safety precautions must
be observed as with any other power
tool to reduce the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury.
32
34
{
BR 350, BR 430
1