Download Nexus Aq 5x5 Quick Reference Guide Rev. 1 Multi

Nexus™ Aq 5x5 QRG
EN
Art-Net™ Art-Net™ is an Ethernet protocol that uses TCP/IP to transfer large
Connection amounts of DMX512 data over a network. Art-Net™ uses the Neutrik®
etherCON® connection. An Art-Net™ Primer is available from
www.chauvetpro.com. Art-Net™ Designed by and Copyright Alderamin
Group Ltd.
Kling-Net Kling-Net is a network protocol to allow auto configuration of display
Connection devices over ethernet. Kling-Net uses the Neutrik® etherCON®
connection. Refer to the ArKaos MediaMaster™ software manual for
detailed instructions on installing and programming this product using this
protocol.
NOTE: Do not use WAN port!
Router
Art-Net™/Kling-Net
Connection
Diagram
Computer/Controller
(running Art-Net™
or Kling-Net protocol)
To other
Art-Net™
or
Kling-Net
devices
Factory Reset This procedure allows you to reset the product to its original factory
settings.
1. Unplug the Nexus™ Aq 5x5 from power.
2. Press and hold <MENU/ESC> and <ENTER> simultaneously while
plugging the Nexus™ Aq 5x5 back into power.
3. Release <MENU/ESC> and <ENTER>.
4