Download Descargar

Connecting the Units
<ENGLISH>
Connecting the power cord
When connecting to separately sold power amp
Antenna cable (supplied)
15 cm
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
15 cm
IP-BUS input (Blue)
Hide-away unit
2m
Black
Multi-CD player
(sold separately)
IP-BUS cable
1.5 m
This product
23 cm
Power amp
(sold separately)
Violet
Antenna jack
Black
21 pin cable (supplied)
Rear output
(REAR OUTPUT)
26 pin cable (supplied)
Violet
RCA cables
(sold separately)
Power amp
(sold separately)
15 cm
This product
Connection method
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
1. Clamp the lead.
Front output
(FRONT OUTPUT)
2. Clamp firmly with
needle-nosed
pliers.
Note:
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner’s Manual or dealer.
Fuse resistor
Orange/white
To lighting switch terminal.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Fuse resistor
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Fuse holder
Black (ground)
To vehicle (metal) body.
+
Parking brake
switch
White
+
≠
White/black
Green
Gray/black
Violet
+
≠
≠
When you connect separately sold
multi-channel processor (DEQ-P7050)
to this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
Front speaker
Note:
When you connect DEQ-P7050 to this unit,
separately sold power amp must be connected
to DEQ-P7050.
Rear speaker
Right
+
+
≠
≠
+
+
≠
≠
+
+
≠
≠
Front speaker
Rear speaker
Front speaker
Right
+
Green/black
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Gray
≠
Left
Rear speaker
System remote control
Left
Power supply side
Ground side
Front speaker
Power amp
(sold separately)
15 cm
Rear speaker
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to speakers.
Note:
Change the initial setting of this product
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.
When you connect separately sold multi-channel processor
(DEQ-P7050) to this unit, do not connect anything to the
speaker leads and system remote control (blue/white).
Violet/black
Fig. 2
Subwoofer
Subwoofer
Perform these connections when using
the optional amplifier.
Fig. 3