Download INGECON SUN 3Play
Transcript
Unit description Ingeteam 10TL M 12.5TL M 15TL M 20TL M 10.3 ~ 13.4 kWp 12.9 ~ 16.8 kWp 15.5 ~ 20.1 kWp 20.6 ~ 26.8 kWp 1000 V 1000 V 1000 V 1000 V 200 ~ 820 V 200 ~ 820 V 200 ~ 820 V 200 ~ 820 V DC input Recommended power range of PV array (1) Maximum input voltage (2) Voltage range MPP1 (3) Voltage range MPP2 (3) 200 ~ 820 V 200 ~ 820 V 200 ~ 820 V 200 ~ 820 V Operating voltage range 200 ~ 1000 V 200 ~ 1000 V 200 ~ 1000 V 200 ~ 1000 V 260 V 325 V 310 V 415 V 23 / 23 A 23 / 23 A 23 / 23 A 23 / 23 A 0 A rms 0 A rms 0 A rms 0 A rms 2 2 2 2 Number of strings versions P and P+ (input 1 / input 2) 1/1 1/1 1/1 1/1 Number of strings versions S, S+ and S++ (input 1 / input 2) 2/2 2/2 3/2 3/2 20 / 20 A 20 / 20 A 30 / 20 A 30 / 20 A 12 A 12 A 12 A 12 A Minimum voltage for Pnom Maximum short circuit current (input 1 / input 2) Maximum inverter backfeed current to the array MPPT Maximum input current (input 1 / input 2) Maximum input current per string AC output Nominal power (up to 45 ºC) 10 kW 12.5 kW 15 kW 20 kW Maximum continuous power 10 kW 12.5 kW 15 kW 20 kW Max. temperature for nominal power (4) 55 ºC 55 ºC 55 ºC 55 ºC Maximum current 15 A 19 A 22 A 29 A Maximum transient current 15 A 19 A 22 A Maximum output fault current Maximum output overcurrent protection < 22 A rms (60 ms) 29 A < 33 A rms (60 ms) 22 A rms 22 A rms 22 A rms Rated voltage 400 V 400 V 400 V 400 V Voltage range 277 ~ 528 V 277 ~ 528 V 277 ~ 528 V 277 ~ 528 V 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 1 1 1 1 Yes. Smax = 10 kVA Yes. Smax = 12.5 kVA Yes. Smax = 15 kVA Yes. Smax = 20 kVA <3% <3% <3% <3% Nominal frequency Cosine of Phi Adjustable cosine of phi THD 33 A rms Performance Maximum efficiency 98.5 % 98.5 % 98.5 % 98.5 % Euroefficiency 98.3 % 98.3 % 98.4 % 98.3 % Air flow 300 m3/h 300 m3/h 300 m3/h 300 m3/h Weight 60 kg 60 kg 60 kg 60 kg General data Cooling system Forced ventilation Measurements (height x width x depth) Stand-by current (5) Nocturnal current Operating temperature Relative humidity (without condensation) Protection rating Markings 730 x 700 x 250 mm < 10 W < 10 W < 10 W 1W 1W 1W < 10 W 1W –20 ~ +65 ºC –20 ~ +65 ºC –20 ~ +65 ºC –20 ~ +65 ºC 0 ~ 95 % 0 ~ 95 % 0 ~ 95 % 0 ~ 95 % IP65 IP65 IP65 IP65 CE EMC and safety regulations EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 61000-3-11, EN 61000-3-12, EN 62109-1, EN 62109-2, IEC62103, EN 50178, FCC Part 15, AS3100 Grid connection regulations RD1699/2011, DIN V VDE V 0126-1-1, EN 50438, CEI 0-21, VDE-AR-N 4105:2011-08, G59/2, G83/2 (6), P.O.12.3, AS4777.2, AS4777.3, IEC 62116, IEC 61727, UNE 206007-1, ABNT NBR 16149, ABNT NBR 16150, South African Grid code, Chilean Grid Code, Romanian Grid Code, Ecuadorian Grid Code, Peruvian Grid code, IEEE 929, Thailand MEA & PEA requirements (1) Depending on the type of installation and geographical location. (2) Never exceed this value. Consider the voltage increase of the panels ‘Voc’ at low temperatures. (3) The output power will be determined by the tension and current configuration selected at each input. (4) For each ºC of increase, the output power is reduced by 1.8 %. (5) Current from PV array. (6) Only for inverters with outputs up to 16 A. 60 ABI2011IQM01_A - Installation and usage manual