Download instructions for the user

OPERATING AND MAINTENANCE INSTRUCTIONS Cod. manA3100 GB
Chap. 5 rev 0
Page 1 of 12
INSTRUCTIONS FOR THE USER
5.1
CONTROLS
The following control devices (shown in the following photo) can be found on the machine:
DESCRIPTION OF THE MACHINE PARTS - FRONT VIEW
1
2
3
4
13
5
6
12
7
11
8
10
9
Fig. 5.1
COMPONENTS
7. Centring accessory
1. Up/down lever (the head is blocked by rotating the knob in a clockwise direction)
8. 90° guide accessory
2. X-axis display unit
10.Y-axis movement hand wheel
3. Drill speed regulator
11.X-axis fast running key
4. Ignition switch
12.X-axis movement hand wheel
5. Y-axis display unit
13.Spindle
9. Bit carrier pliers set
6. Lens support bar
THIS MANUAL IS THE PROPERTY OF
UNDER NO CIRCUMSTANCES MAY IT BE DUPLICATED, EVEN PARTIALLY