Download 1 - Sears

S
p
te
21
B
M
E
M
D
N
C
M
M
A
TT
(20 used)
SS
Place the roller on the SLIDE
behind the roller on the RAIL.
Carefully stand your unit upright.
Push the RUBBER SLEEVES (SS) over the METAL PINS (TT). Insert the METAL PINS into the hole locations of your choice in the
ENDS (A and B) and UPRIGHTS (C and D). Set the ADJUSTABLE SHELVES (M and N) onto the METAL PINS.
To insert the drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on the unit.
Lift the front of the drawer up and slide it into the unit.
To make adjustments to the drawer, loosen the SCREWS in the DRAWER FRONT BRACKETS, make needed adjustments, and
tighten the SCREWS.
Page 26
www.sauder.com/services
412312