Download handleiding

10
WHERE CAN THE PUMP BE USED?
This submersible pump has been designed for private usage in or around the home and
garden.
Submersible pumps are primarily used for draining water, moving liquids, emptying
water reservoirs, cellars etc, pumping water from water sources and containers,
emptying boats and yachts and for circulating water for limited periods.
Note: these pumps may not be used in a swimming pool!
The pumps are completely watertight and can be submerged in liquid with a maximum
depth of 5 or 7 metres (see technical specifications).
The submersible pump is suitable for use with the following liquids:
Type FLOW 250: clean water and soapy water
Type FLOW 400: clean and lightly soiled water and soapy water
Corrosive, lightly flammable or explosive liquids (such as petrol, diesel, paraffin, thinners
etc), fats, oil, salty or contaminated water from toilets etc cannot be pumped! Bear in
mind that sand and all other abrasive and corrosive substances will increase wear and
tear and impact upon the effectiveness of the pump.
The temperature of the pumped liquids must not exceed 35°C.
This pump is not suitable for continuous use, such as the continual circulation of water.
This type of use will substantially shorten the pump’s life expectancy.
DESCRIPTION
BEFORE USE
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your
vendor for inspection or replacement.