1
Download Manuel d`Application POMPES
Transcript
POWER ELECTRONICS SD700 PARÁMÈTRES 1 F0 NO FAULT LAST FAULT=FXX 2 F0 NO FAULT FIFTH FAULT=FXX 3 F0 NO FAULT FOURTH FAULT=FXX 4 F0 NO FAULT THIRD FAULT=FXX 5 F0 NO FAULT SECOND FAULT=FXX 6 F0 NO FAULT FIRST FAULT=FXX 7 CLEAR FAULTS=N 1 CONTROL MODE=1 2 MAN SPD REF= LOC 3 MAN SPEED=+0.0% MANUAL SPEED 4 ALT MAN S R=LOCAL 5 SETPT1=0.0Bar LOCAL SETPOINT 1 6 SETPT2=0.0Bar LOCAL SETPOINT 2 7 SETPT3=0.0Bar LOCAL SETPOINT 3 8 SETPT4=0.0Bar LOCAL SETPOINT 4 9 SETPT5=0.0Bar LOCAL SETPOINT 5 10 SETPT6=0.0Bar LOCAL SETPOINT 6 11 SETPT7=0.0Bar LOCAL SETPOINT 7 12 SETPT8=0.0Bar LOCAL SETPOINT 8 13 T AutOFF=OFF AUTO-OFF DELAY RÉGLAGE 2 - ___________________ ___________________ - ___________________ ___________________ - ___________________ ___________________ - ___________________ ___________________ - ___________________ ___________________ - ___________________ ___________________ N ___________________ G25: Contrôle de Pompes - S25.1: Consignes. ___________________ 1 ___________________ ___________________ LOC ___________________ ___________________ +0.0% ___________________ ___________________ LOCAL ___________________ ___________________ 0.0Bar ___________________ ___________________ 0.0Bar ___________________ ___________________ 0.0Bar ___________________ ___________________ 0.0Bar ___________________ ___________________ 0.0Bar ___________________ ___________________ 0.0Bar ___________________ ___________________ 0.0Bar ___________________ ___________________ 0.0Bar ___________________ ___________________ OFF ___________________ G25: Contrôle de Pompes - S25.2: Réglage PID. ___________________ 1 PID SETP=LOCAL LOCAL ___________________ ___________________ 2 PID aSTP=LOCAL LOCAL ___________________ ___________________ EA2 ___________________ ___________________ 1.0 ___________________ ___________________ 5.0s ___________________ ___________________ 0.0s ___________________ ___________________ 7 PID ERR=+xx.x% - ___________________ ___________________ 8 ERR=+xx.xxkPa - ___________________ ___________________ 3 PID FBK=AI2 4 PID Kc=1.0 PROPORTIONAL PID 5 PID It=5.0s INTEGRAL PID 6 PID Dt=0.0s DIFFERENTIAL PID 9 PID INVERT=N 1 LP Pon=0.0Bar AWAKENING LEVEL 2 FP SpON=+90.0% FIX PMP STAR SPD 52 RÉGLAGES PAR DÉFAUT RÉGLAGE 1 G13 : Historique des défauts N ___________________ G25: Contrôle de Pompes – S25.3: Conditions de Démarrage. ___________________ 0.0Bar ___________________ ___________________ +90.0% ___________________ ___________________ REGISTRE DE CONFIGURATION
