Download spiroline mp

Transcript
5after use
Users of the breathing apparatus
1a. Close
the cylinder valve on the bail-out set/breathing apparatus and take off the
facemask as described in the instructions for the bail-out set/breathing apparatus.
1b.
Disconnect the air supply hose from the bail-out set/breathing apparatus.
1c.
Take off the unit and vent as described in the instructions for the bail-out set/
breathing apparatus.
Users of the Spiroline belt
1a. Take
off the facemask as described in the instructions for the facemask.
1b.
Disconnect the air supply hose from the Spiroline belt.
1c.
Open the waist belt buckle by pressing it in the middle.
1d. Take
1e.
off the belt.
Activate the safety pressure on the facemask to vent.
The unit must be cleaned after every use, as described in Section 6. If cleaning is
done directly after use, this must be done before steps 2-4 below.
2.
3.
4.
10
Close the valves of the air source. Open the vent valves on the regulator units in
the TRS unit.
Close the vent valves, disconnect the adapter hoses and mount them in the box of
the TRS unit.
Disconnect the air supply hose.