Download Laser Level - EngineerSupply

LT200New2007
15/08/07
19:52
Page 2
Table of contents
1. General information
1.1. Description
1.2. Specifications
1.3. Laser overview
1.4. Keypad overview
1. General information
3
Thank you for buying the LT200! Although it is simple to use, we
recommend that you read this manual before operating the laser.
1.1 Description
2. How to use the laser
2.1 Horizontal setup
2.2 Turning on the laser
2.3 H.I. Alert
2.4 Rotation speed
2.5 Match slope
2.6 Batteries
4
3. How to check and calibrate
3.1 Calibration
3.2 Fast / Slow blinking
3.3 Moving the beam to calibrate
3.4 Checking and calibrating X and Y axes
3.5 Cone error checking
7
CAUTION / Certification Label
CLASS 3R LASER PRODUCT
WAVE LENGTH 630-680 NM
MAX. OUTPUT POWER 5MW
LASER LIGHT: AVOID DIRECT EYE EXPOSURE
CONFORMS TO IEC 60825-1; 2001
COMPLIES WITH 21 CFR 1040.10 AND
1040.11 EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE NO. 50
DATED JULY 26, 2001
Safety Label
AVOID EXPOSURE.
LASER
LIGHT IS EMITTED
FROM THIS APERTURE.
1.2 Specifications
4. Care and handling
11
5. Warranty
11
6. Accessories
6.1 Laser detector overview
6.2 Using the SR200 detector
6.3 SR200 specifications
12
Recommended use
Accuracy
Self-leveling range
Rotation speeds
Slope match
Laser battery
Charging time
Battery life
Operating temperature
Dimensions
Weight
Environmental
Laser diode
2
GB F E D I N FIN
The LT200 is ideal for general construction, site preparation, and
other leveling applications. It automatically self-levels in horizontal,
can be used for slope match and is totally waterproof.
1,000 ft. (300 m) diameter
± 1/8" @ 100 ft. (± 3 mm @ 30 m)
± 8%
0 - 90 - 600 rpm
5° on both X & Y axes in manual
mode; also, semiautomatic mode with
X in manual, Y in automatic
NiCad rechargeable
15 hours
40 hours
14° to 122° F (-10°C to 50°C)
5” x 4 3/4” x 8 1/2”
12.5 x 11.5 x 21.9 cm
7 lbs. (3.5 kg)
Waterproof (IP67); nitrogen purged
635 nm, visible, <5mW
IEC/CDRH: Class 3R
3