Download DFU Draft

Operator’s User Manual
English
Appendix A
Electro-magnetic Compatibility Declarations
Emissions All Equipment and Systems
The Veinsite is intended for use in the electromagnetic environment specified
below. The customer or user of the Veinsite should ensure that it is used in
such an environment.
Emissions Test
Compliance
Electromagnetic Environment – Guidance
RF Emissions
CISPR 11
Group 1
The VTS1000 (Veinsite) uses RF energy only
for its internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
RF Emissions
CISPR 11
Group 2
N/A
RF Emissions
CISPR 11
Class A or B
B
Harmonics IEC
61000-3-2
Class A,B,C,D or
N/A
Class A when using VGA cable and external
monitor. Class B otherwise
Flicker IEC 610003-3
Complies or N/A
Complies
The VTS1000 (Veinsite) is suitable for use in
all establishments, including domestic, and
those directly connected to the public lowvoltage power supply network that supplies
buildings used for domestic purposes.
CAUTION: When using the external monitor feature, the connected
monitor may experience a momentary flicker due to A.C. electrical
disturbances. The internal display of the Veinsite will not be affected.
29