Download PR4EN1ELEC / 515586

Transcript
with a damaged or excessively worn cutting device.
q) Never operate the hedge trimmer with defective guards or when such protective guards are not in
place.
r) Prior to operation, always ensure all handles and guards supplied are properly fitted when using
the hedge trimmer. Never attempt to use an incomplete hedge trimmer or one with an unauthorized
modification.
s) While operating the hedge trimmer always be sure of a safe and secure operating position at all times, especially
when using steps or a ladder.
t) Always lubricate the cutting blade with protective spray before storage.
u) Keep all nuts, bolts and screws tight to be sure that the machine is in safe working condition.
(B) Additional safety rules for Pole Pruners
a) Keep the cutting unit of the extendable pole saw at least 10 m away from electric lines.
b) Wear ear and head protection as well as long, durable clothes and sturdy, antiskid footwear.
c) If you are a beginner ask an experienced person for instructions before you work with the unit
for the first time on your own.
d) Do not use the unit when you’re feeling tired or sick or you are under the influence of medicine,
drugs or alcohol.
e) Frequently take a long break and change your position to avoid getting tired too soon.
f) Keep others, in particular children and even animals, away from the activity area.
g) Remove branches in sections.
h) When working overhead mind falling clippings and make sure that these cannot affect your work
or injure you. Remember that falling clippings could bounce of the ground.
ATTENTION! The extendable pole saw has the capacity to cut through branches which could kill
you and other people when falling down.
i) Before you start working remove any debris from the ground to avoid tripping.
j) Always stand in a secure position and keep your balance.
k) Always keep extension and connecting cables behind the saw or away from the cutting area.
l) Only use spare parts approved by the manufacturer, in particular with regard to the chain and
chain guide.
m) When cutting branches, be aware of a potential kickback.
Once the branch is partially cut, it can fold downwards and pinch the chain.
Causes and Operator Prevention of Kickback
Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood
closes in and pinches the saw chain in the cut.
- Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back
towards the operator.
- Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back
towards the operator.
- Either of these reactions may cause you to lose control of the saw which could result in serious
personal injury. Do not rely exclusively upon the safety devices built into your saw. As a chainsaw
user, you should take several steps to keep your cutting jobs free from accident or injury.
- Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can
be avoided by taking proper precautions as given below:
- Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars
and chains may cause chain breakage and/or kickback.
- Follow the manufacturer’s sharpening and maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to increased kickback.
n) Always keep proper footing and operate the chainsaw pruner only when standing on fixed,
secure and level surface. Slippery or unstable surfaces such as ladders may cause a loss of balance
or control of the tool.
o) Carry the pruner switched off, by the front handle, the chain pointing forward. When
Page 34 / 46