Download SPORTident School and Training Set
Transcript
Kit Scolaire et d'Entraînement SPORTident - RACE V1.3 05.11.13 No. Art.: 16100 No. Art. Composition Puce SPORTident Control 10503 SIAC 14022 Kit d'impression SPORTident MCP 7830: Qté 20 1 1 station d'impression SPORTident BS7-P 1 imprimante thermique MCP 7830-242 1 câble données “RJ12 – D9” 1 RS232-USB Converter 1 câble RS232 “modem-zero” 1 adapt. secteur, MPS161 avec prise EU, UK, et US 1 kit de puces d'instructions SPORTident: “Service/OFF”, “Start”, “Print results”, “Clear backup” 5 rouleaux de papier therm. 57,5mm, 25m 1 manuel de l'imprimante 1 valise de transport bleue (340 x 275 x 83 mm³) Station de contrôle SPORTident 11110 2 BSF8-DB Configuration: Effacer, Contrôle Station de contrôle SPORTident 11153 4 BS11-BS blue Configuration: Départ, Temps intermediaire 1 et 2, Arrivée Station maître SPORTident 13040 1 BSM8-D-USB Configuration: Lecture des puces SPORTident GmbH • Arnstadt • Germany • www.sportident.com • [email protected] 1/2 Kit Scolaire et d'Entraînement SPORTident - RACE V1.3 05.11.13 No. Art. Composition Qté 30300 Aimant “Marche/Arrêt” pour BS11 1 30110 Valise de transport, bleu (394 x 294 x 106 mm³) avec mousse de transport 1 19999 Dépliant SPORTident, aperçu avec mode d'emploi 1 Consommables 32111 Rouleau de papier thermique 57,5 mm, 25 m Options 30240 Plaque de montage “large” pour BS7, avec visserie ( 2 unités: vis, rondelle, écrou) 33210 Plaque de montage “étroite” pour BS7 SPORTident GmbH • Arnstadt • Germany • www.sportident.com • [email protected] 2/2