Download IM CA12E-S04E

User's
Manual
Sprcifications
CA11E and CA12E
HANDY CAL
Supplement
Safety standards:
Changed Item
EN 61010-1
(only AC adapter B9108WB)
(94012 and 94013 are excuded.)
For Safety Standars
EN 61010-1
Measurement category I
Pollution degree 2, Indoor use,
Altitude 200 m or less
Power supply:
Dedicated AC adapter 8 VDC, 150 mA.
B9108WB: AC 220-240 V
This paper explains of Safety standars and literal error correction of CA11E and CA12E.
User's Mamual:
IM CA11E-01E and IM CA11E-02E
IM CA12E-01E and IM CA12E-02E
Measurement Category (CAT.)
The CA11E and CA12E are designed for measurement category I.
CA12E (Temperature Calibrator)
WARNING
<External RJ sensor and reference junction compensation>
Do not use the CA11E and CA12E for measurements in locations falling that
fall under Measurement Categories II, III, and IV.
Measurment
category
CAT. I
CAT. II
CAT. III
CAT. IV
Description
For measurement performed on
circuits not directly connected to
MAINS.
For measurements performed
on circuits directly connected
to the low voltage installation.
Remarks
Circuits not connected
to a mains power
source.
Appliances, portable
equipment, etc.
For measurement performed
in the building installation.
Distribution board,
circuit breaker, etc.
For measurement performed
at the source of low-voltage
installation.
Overhead wire,
cable systems, etc.
Handling Precautions
• Cleaning
Before cleaning the case and operation panel, make sure that the power cord
is unplugged from the outlet if you are using an AC adapter and gently wipe the external
surfaces with a soft clean cloth.
Do not use chemicals such as benzine or thinner since these may cause discoloring and
deformation.
Printed in Korea
IM CA12E-S04-EN
2nd Edition: Dec. 2012 (YMI)
WARNING
To prevent electrical shock, be sure to use the dedicated R.J.Sensor
B9108WA only.
Literal Error Corection
User's Manual
IM CA11E-02E
9. Specifications
■ Source Functions
Range
Range of
Selection
Generated Signal
20 mA*
0 to 24.000 mA
4-20 mA*
4/8/12/16/20 mA
Accuracy
0.05%+4 μA
Setting
Resolution
1 μA
4 mAstep
Error: 0.1 μA → Correction: 1 μA