Download N NVR1
Transcript
NVR1 Click to play the latest recorded video clip. Click again to pause. play/pause In pause mode, click one frame backward. stop Click to stop the video playback. slow playback Click once to play at 1/4 normal speed, click twice for 1/8 normal speed. previous/next hour Click to jump to the next/previous one-hour time interval (for example, 11:00 ~ 12:00 or 14:00 ~ 15:00) and start playing the earliest video clip recorded during this hour. quick search Click to enter the quick search menu. once to go one frame forward, or to go Key lock / unlock To lock or unlock NVR local operation, click (lock) or (unlock) on the NVR status panel [15]. When you unlock NVR local operation, the system asks you to enter a user name and password. Note: The default user name and password are “admin”. Different user types have different access rights to NVR functions. For details, please refer to the full manual on the CD-ROM. 9. Configuration of Camera on WAN Port Note: This configuration method is for Push Video IP cameras or IP cameras connected via internet (CAMIP9, CAMIP13, or cameras of a different brand that are ONVIF certified). NVR WAN IP Address Setting First set up the WAN IP address of the NVR. In the main menu [19], click select NETWORK > WAN. (ADVANCED CONFIG) and • IP: e.g. 192.168.2.10 (for example if the range of the router is: 192.168.2.1 – 192.168.2.254) • GATEWAY: e.g. 192.168.2.1 (= the IP address of the router) • NETMASK: 255.255.255.0 ADVANCED CONFIG CONNECTION CAMERA DETECTION ALERT NETWORK DISPLAY RECORD NOTIFY WAN LAN E- DDNS MAIL NETWORK TYPE IP GATEWAY NETMASK PRIMARY DNS SECONDARY DNS PORT STATIC 192.168.2.10 192.168.2.1 255.255.255.0 168.95.1.1 139.175.55.244 88 EXIT Configuring a Local Push Video Camera 1. First, follow the installation and configuration instructions in the quick reference guide of your Push Video IP camera. 2. Make sure that the IP address of the Push Video camera matches the router setting. For example: set the IP address to 192.168.2.197 and check if the Push Video function works. 3. Add the camera to the NVR as follows: in the main menu [19], click select CONNECTION. V. 01 – 23/03/2012 7 (ADVANCED CONFIG) and ©Velleman nv