Download EP 3500 PLUS

EN
SET MACHINE
2
LAYOUT
Rotate the height of the adjustment feet, located on the bottom, to position the machine
to be perfectly level.
Using a water filter (optional accessory) improves
water quality and extends the life of the appliance. Use the Aqua Aroma Crema Brita® for
Lavazza. To insert the filter, follow the instruction
sheet attached to the accessory.
It is recommended not to change the selection
already set on the filter.
EP 3500 PLUS: Layout 1
Espresso
Long Espresso
4
It is possible, after removing the cover, to take
the water tank out of the machine to refill it
separately.
5
Plug the power cord into the socket at the
back of the machine.
Macchiato coffee
Cappuccino
Mokaccino
Latte macchiatoflavored drink
Given the size and weight of the machine,
positioning, adjusting the feet and stabilization should be performed by two people.
Hot drinks
Chocolateflavored drink
STARTING THE MACHINE
The tank cover has a key lock (with blue plastic
handle).
EP 3500 PLUS: Layout 2
Espresso
1
Long Espresso
Turn the key (blue) clockwise [A] to open
the lid.
Turn the key (blue) counter-clockwise [B] to
close the lid.
Macchiato coffee
Cappuccino
Mokaccino
Latte macchiatoflavored drink
B
A
Milk-flavored drink
Chocolateflavored drink
2
We take no responsibility for any damage
caused by:
t JODPSSFDUVTFOPUJOBDDPSEBODFXJUIUIF
intended use of the machine;
t SFQBJSTDBSSJFEPVUCZOPOBVUIPSJ[FE
service centers;
t UBNQFSJOHXJUIUIFQPXFSDPSE
t UBNQFSJOHXJUIBOZDPNQPOFOUPGUIF
machine;
t VTFPGVOPSJHJOBMTQBSFQBSUTBOE accessories;
t GBJMVSFUPEFDBMDJGZUIFNBDIJOF
t TUPSBHFBUUFNQFSBUVSFTCFMPX¡$
t VTFPGDBQTVMFTEJõFSFOUGSPNUIPTF
indicated.
In these cases the warranty will be voided
Lift and remove the lid of the water tank.
Ensure that hands, machine, cable and the
footprint of the machine are not wet.
6
3
Fill the water tank using only non-carbonated,
fresh drinking water.
Place a glass/cup under the nozzle.
Damages caused to the machine due to failure to follow instructions on this manual
are not covered by warranty
UNPACKING AND PLACEMENT
1
Remove the machine from the packaging by
putting pressure on the side arms and pulling
it upward.
Place the machine on a flat, stable, horizontal space, away from water, flames and
heat sources.
19