Download 4 Installation

4
4.7
Installation
Switching the Unit On
• Push the power button on the rear panel.
If mounting position requires, the unit may be
switched on and off via the power supply
while the power switch remains switched on.
The LCD display now indicates the progress
of the ignition sequence, the software version
and the ready status of the unit.
In about 3 minutes (97057: 2 minutes) the
lamp has reached its rated output. The status
LED lights up in green.
The main window appears about another 3
seconds later. You should now wait about one
minute to allow the UV output to reach its
maximum.
MENU
TIME
005.50s
21