Download Kit Vernis 14 Jours
Transcript
P R E PA R I N G T H E N A I L S 4 Gently push back the cuticles with the Hoof Stick and remove ALL residual skin cells from the nail plate surface. Skin cells contain oils and moisture which will weaken the bond of the polish on the nail plate. 5 LIGHTLY buff over the nail plate with the white Sanding Block to remove surface shine and any ridges. Follow each of these steps carefully and thoroughly. We suggest you work on one hand or foot at a time. 1 Remove jewellery and any nail varnish or nail products using Acetone Solution. TIP: check if ridges have been filed flat by feeling over the surface of the nail. Often you can still see the ridges even though they have actually been filed flat. 2 File and shape nails to a uniform length if necessary using the Large Grit File. 6 Brush away dust using a tissue, take care to remove all dust particles. 7 Now wipe over nail plate using Finishing Wipe to remove all oils and dehydrate the nail plate. TIP: go from corner to centre in one direction, using the groove on the side of your nail as a guide. 3 Wash and dry hands or feet thoroughly, paying particular attention to the nails. NOTE: Do NOT touch the nail surface after this stage as your fingers will transfer natural oils from the skin onto the nail. Once Finishing Wipe has fully evaporated You are ready to apply the 2-in-1 Base Coat. 3 ENGLISH This is the most important part of applying nail polish, if the nails are not correctly prepared the polish will not have a silky smooth salon finish and may not last as long.