Download 1 - FERM

Fig.1
Fig.2
5.12
5.13
5.14
5.15
5.16
5.17
5.18
5.19
-
Change wheel 42
Change wheel 49
Change wheel 28
Change wheel 63
Change wheel 70
Change wheel 84
Change wheel 98
Change wheel 105
Center MC-3
Center MC-2
3-Jaw chuck
4-Jaw chuck
V-belt tension roller
Micro switch for door
V-Belt Z31 (10 x 790)
V-Belt Z28 (10 x 710)
V-Belt Z35 (10 x 890)
400358
400359
400360
400361
400362
400363
400364
400365
400368
400369
400370
400371
400372
400373
800114
800170
800197
The reference numbers refer to the 5 annexes indicated with the numbers 0, 1, 2, 3, 4, 5. The number in front of the point refers to the Annex, the
number behind the point refers to the part. So, reference 4.07 refers to Annex 4, part 7.
Accessory list
Fig.3
Fig.4
Fig.5
Fig.6
Fig.7
Accessory
Lower case
3-Jaw chuck
4-Jaw chuck
Steady rest
Follow rest
Face plate
Accessories-set
Center
Center
Inside basin 3-jaw
Outside basin 3-jaw
V-belt tension
Gear rack
Gear rack
Inch gear wheel set
Change wheel scissors
Handwheel
Motor
V- belt
V- belt
V- belt
Switch
Transmission/lock nut *)
Slide spindles, slide nuts *)
Ball- and roller bearings *)
Revolving center
Drill chuck 13 mm
Drill chuck 16 mm
Adaptor B-18/MT-2
Chisels 10 x 10 mm
Chisels 12 x 12 mm
Chisels 16 x 16 mm
Taper shank drills
No.
330957
330955
330956
330962
330965
330968
400375
400368
400369
400377
400376
400374
400346
400366
330961
40031
400404
400336
800170
800114
800197
400343
Function
With store possibilitiesand cutting tray
Clamping pieces of work which are round
Clamping pieces of work which are not round
Turning long pieces of work
Turning long and thin pieces of work
Fixing pieces which are not round
As delivered with machine
MT-3
MT-2
Set
Set
Complete
Steel
Synthetic
Thread cutting
Steel
Synthetic for longitudinal adjustment
Complete
10 x 710 mm
10 x 790 mm
10 x 890 mm
Complete unit with relay
330557
330240
330250
330297
331466
331464
331465
332407
Taper shank drills
Morse taper
Morse taper
Morse taper
332409
330180
330185
330190
MT-2
Self-stretching, J2 connection
Self-stretching B-18 connection
For drill chuck 16 mm
5 parts HM, lenght 160 mm
5 parts HM, 180 mm
5 parts HM, 180 mm
9 parts: MT-2: 14.5, 16, 18, 20 and 22 mm.
MT-3: 24, 26, 28, 30 mm.
10 parts: MT-2: 14.5, 15, 16, 17, 18, 19, 20, 21, 22 and 23 mm
From MT-4 to MT-3
From MT-3 to MT-2
From MT-4 to MT-2
Fig.8
*) These part are not always in stock. Ask your local Ferm-dealer.
02
Ferm
Ferm
103