Download Manual

EN
:(/',1*0$6.
6DIHW\LQVWUXFWLRQV
7KDQN\RXIRUEX\LQJWKLV)HUPSURGXFW
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
([SODQDWLRQRIV\PEROV
The numbers in the text refer to the diagrams
on pages 2.
‡
Read the operating instructions carefully
before using this device. Familiarize
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
‡
,QWURGXFWLRQ
Welding helmets are designed to protect the eyes
from sparks, spatter, and harmful radiation under
normal welding conditions. It comes ready for use.
The only thing you need to do before welding is
adjust the position of the headband, and make
sure the correct shade glass lens lens is installed.
Denotes risk of personal injury, loss of
life or damage to the tool in case of nonobservance of the instructions in this
manual.
This helmet is not suitable for use with
laser or gas-welding.
‡
‡
‡
‡
‡
‡
‡
&RQWHQWV
1. Technical data
2. Safety instructions
3. Instruction for use
4. Maintenance
‡
7HFKQLFDOGDWD
7HFKQLFDOVSHFLILFDWLRQV
Viewing area
UV/IR Protection
Dark state
Operating temperature
Helmet material
Total weight
119x106 mm
Up to shade DIN 11 at all times
Shade 11
-5°C to +55° C
High-impact resistant nylon
540 g
‡
‡
‡
‡
Ensure all workshop safety rules, regulations,
and conditions are complied with when using
welding equipment.
The helmet will not offer protection against
mis-use of workshop tools, equipment, or
accessories.
Maintain the helmet in good condition, and
protect cartridge from liquid and dirt contact.
Regularly replace the protective lens and
replace any damaged or worn parts.
Use genuine parts only. Non authorized parts
may be dangerous and will invalidate the
warranty. NEVER open or tamper with the
shade cartridge.
Select the shade level before use.
Ensure the front cover lens is securely in
place before use.
Fit the helmet and adjust the head band so
the helmet will sit as low and near to your face
as possible,
Use helmet only in temperatures ranging from
-5° C to 55° C.
The eye protective plate in helmet is NOT
unbreakable. Helmet will not protect you
against severe impact hazards (such as, but
not limited to) fragmenting abrasive discs/
grinding wheels, stones and other grinding
tools, explosive devices or corrosive fluids.
The helmet will only protect the eyes and face
from radiation and sparks.
Remove ill fitting clothing, remove ties,
watches, rings, and other loose jewellery.
Maintain correct balance and footing. Ensure
the floor is not slippery and wear non slip
shoes.
Keep children and unauthorized persons
away from the working area.
The materials which may come into contact
with wearer's skin could cause allergic
reactions to susceptible individuals.
3