Download SAFETY SUMMARY
Transcript
CHAPTER 4 - MAINTENANCE & SPARE PARTS 4.3 PROBE FILTER CLEANING Every two weeks, or when necessary, clean the sintered bronze filter with a suitable degrease solvent, then rinse with dry compressed air following the directions given in fig. 4-3 and check the integrity and connections of the plastic flexible tube. Figure 4-3 4.4 EXTENSION PROBE FILTER CLEANING If the extension probe is used, every week, or when necessary, clean the sintered bronze filter with a suitable solvent, then rinse with dry compressed air following the directions given in fig. 4-4 and check the integrity and connections of the plastic flexible tube. Figure 4-4 23 87-900-045-01 (D)