Download SAFETY SUMMARY

Transcript
CHAPTER 4 - MAINTENANCE & SPARE PARTS
4.3 PROBE FILTER CLEANING
Every two weeks, or when necessary, clean the
sintered bronze filter with a suitable degrease solvent,
then rinse with dry compressed air following the
directions given in fig. 4-3 and check the integrity and
connections of the plastic flexible tube.
Figure 4-3
4.4 EXTENSION PROBE FILTER CLEANING
If the extension probe is used, every week, or when
necessary, clean the sintered bronze filter with a
suitable solvent, then rinse with dry compressed air
following the directions given in fig. 4-4 and check the
integrity and connections of the plastic flexible tube.
Figure 4-4
23
87-900-045-01 (D)