Download HIT-TRAC 16 E

The driving gears do
not move despite
motor noise
Tension of the rope is greater than
the permissible pulling force
Reduce load or use rope
guide pulley system
Brake does not open
Rectifier defect
get repaired
Rope does not move
Rope inserted wrongly
despite rotating driving
wheel
Wrong diameter of rope
7
Insert rope according to the
diagram
Insert the correct rope
Rope is worn down
Insert a new rope
Driving wheel or rope greased too
much
Clean
Groove in driving wheel is
contaminated
Clean
No load is on rope
Place load on the rope
Maintenance
The following control and maintenance work has to be carried out:
Work
General visual inspection:
- Driving system
- Housing
- Anchor bolt, pulling lug
When
you start
working
When
Comments
necessar
y
X
After initial operation or
Inspection
Checking screws
Cleaning driving wheel
Rotation direction of
electric motor
X
Relubrication of gear ring
Rope: Visual inspection
- Pressed sleeve
- Eyelet hook with safety
device
UP pushbutton = counter-clockwise
rotation of the driving wheel
X
X
X
Gear grease
Check for deformation, damage,
tears or broken wires
69