1
Download 1 - FERM
Transcript
ACCESSORY LIST MD-500 Fig. 1 Fig. 5 Fig. 2 Fig. 6 Fig. 3 Fig. 7 ACCESSORY LOWER CASE 3-JAW CHUCK 4-JAW CHUCK STEADY REST FOLLOW REST FACE PLATE ACCESSORIES-SET CENTER CENTER INSIDE BASIN 3-JAW OUTSIDE BASIN 3-JAW V-BELT TENSION GEAR RACK GEAR RACK INCH GEAR WHEEL SET CHANGE WHEEL SCISSORS HANDWHEEL MOTOR V- BELT V- BELT V- BELT SWITCH TRANSMISSION/LOCK NUT *) SLIDE SPINDLES, SLIDE NUTS *) BALL- AND ROLLER BEARINGS *) REVOLVING CENTER DRILL CHUCK 13 MM DRILL CHUCK 16 MM ADAPTOR B-18/MT-2 CHISELS 10 X 10 MM CHISELS 12 X 12 MM CHISELS 16 X 16 MM TAPER SHANK DRILLS NR 330957 330955 330956 330962 330965 330968 400375 400368 400369 400377 400376 400374 400346 400366 330961 40031 400404 400336 800170 800114 800197 400343 FUNCTION WITH STORE POSSIBILITIESAND CUTTING TRAY CLAMPING PIECES OF WORK WHICH ARE ROUND CLAMPING PIECES OF WORK WHICH ARE NOT ROUND TURNING LONG PIECES OF WORK TURNING LONG AND THIN PIECES OF WORK FIXING PIECES WHICH ARE NOT ROUND AS DELIVERED WITH MACHINE MT-3 MT-2 SET SET COMPLETE STEEL SYNTHETIC THREAD CUTTING STEEL SYNTHETIC FOR LONGITUDINAL ADJUSTMENT COMPLETE 10 X 710 MM 10 X 790 MM 10 X 890 MM COMPLETE UNIT WITH RELAY 330557 330240 330250 330297 331466 331464 331465 332407 TAPER SHANK DRILLS 332409 MORSE TAPER MORSE TAPER MORSE TAPER 330180 330185 330190 MT-2 SELF-STRETCHING, J2 CONNECTION SELF-STRETCHING B-18 CONNECTION FOR DRILL CHUCK 16 MM 5 PARTS HM, LENGHT 160 MM 5 PARTS HM, 180 MM 5 PARTS HM, 180 MM 9 PARTS: MT-2: 14.5, 16, 18, 20 AND 22 MM. MT-3: 24, 26, 28, 30 MM. 10 PARTS: MT-2: 14.5, 15, 16, 17, 18, 19, 20, 21, 22 AND 23 MM FROM MT-4 TO MT-3 FROM MT-3 TO MT-2 FROM MT-4 TO MT-2 *) These part are not always in stock. Ask your local Ferm-dealer. Fig. 4 2 Fig. 8 Ferm Ferm 75
