Download SUPERHUMMEL - Technische Daten

3
ENGLISH
TECHNICAL DATA
Technical Data
Manufacturer
Eugen Lägler GmbH
Machine model
Belt sanding machine
Serial number
see type plate
Year of manufacture
see type plate
Motor type
Voltage
Three-phase AC motor
Single-phase AC motor
---
220 - 230 V
Voltage star connection
400 V
---
Voltage delta connection
230 V
---
Frequency
Power output
Necessary fuse protection of mains supply
Insulation class
50 Hz (CPS)
50 Hz (CPS)
5.5 kW
4.2 kW
32 A
25 A
4 kW
16 A
B
F
Protection class
Safety devices
60 Hz (CPS)
IP 54
No-voltage release, temperature switch as overload
protection in the motor
Starting capacitor
---
130 µF
Running capacitor
---
40 µF
Diameter of sanding drum
175.5 mm (6.9“)
Width of sanding drum
Speed of sanding drum
Dimension of sanding belt
300 mm (11.81“)
2400 1/min
(rpm)
2880 1/min
(rpm)
300 x 800 mm (11.8“ x 31.5“)
Length of machine
1100 mm (43.3“)
Width of machine
500 mm (19.7“)
Height of machine
1050 mm (41.3“)
Weight machine housing
Weight motor
47 kg (104 lbs)
35 kg (77 lbs)
Weight guide tube complete
Total weight of machine
Dust emission in working area
Noise emission in working area
(measurement taken 1.5 m (5 ft.) above floor at
operator’s ear)
sanding of beech parquetry, sanding belt grain 80
Tolerance for measurement
Vibration total value ahv (measured at the handle)
SUPERHUMMEL
01.11.2011
2400 1/min
(rpm)
57 kg (126 lbs)
5 kg (11 lbs)
87 kg (192 lbs)
109 kg (241 lbs)
< 2 mg/m³ (0.024 gr/cu yd)
76 dB (A)
80 dB (A)
4 dB (A)
< 2.5 m/s²
53