Download Instructions de service
Transcript
english 1. Safety instructions 1.1 General These installation and operating instructions contain basic information, which must be observed during installation, operation and maintenance. They must therefore be read without fail by the fitter, as well as the responsible technical personnel/operator before installation and commissioning. They must always be available for reference at the place of installation. Not only the general safety information contained in these «Safety instructions» must be observed, but also the special safety instructions included in the other sections. 1.2 Identification of warning signs The safety information contained in these installation and operating instructions, which if not observed can result in danger to life are specially denoted with the general warning sign «Safety sign to DIN 4844-W9». This symbol is a warning of dangerous electrical voltage. «Safety sign to DIN 4844-W8» Warning This warning sign is provided with safety instructions, which if not observed can result in danger to the machine and its functions. Information provided directly on the installation, e.g.: – Arrow for direction of rotation – Indications of liquid connections must be observed without fail and be kept in a clearly legible condition. 1.3 Personal qualification and training Personnel assigned to installation, operation, maintenance and inspection must have the appropriate qualifications for this work. The range of responsibility, competence and supervision of personnel must be exactly defined by the operator. 1.4 Dangers from non-observance of safety instructions Non-observance of safety instructions can result in danger to life as well as to the environment and installation. Non-compliance with safety instructions can result in loss of all claims to compensation. In particular the following dangers can arise for example: – Failure of important system functions. – Failure of prescribed methods of maintenance and servicing. – Danger to personnel from electrical and mechanical influences. 24 1.5 Safety-conscious working The safety information contained in these installation and operating instructions, the existing national accident prevention regulations and any internal working, operating and safety regulations of the operator must be observed. It must be ensured before starting work on any part of the equipment that all electrical components of the system on which work is to be performed are disconnected from the power supply. 1.6 Safety instructions for the operator/user Dangers from electrical energy must be excluded (for relevant details refer for example to the regulations in NIN(CENELEC) and the local power supply companies). 1.7 Safety instructions for installation, maintenance and inspection The operator must ensure that all installation, maintenance and inspection work is performed by authorized and qualified technical personnel, who are sufficiently informed by a thorough study of the installation and operating instructions. Work on the system should in principle only be performed while at standstill. The function of all safety and protective devices must be restored immediately after completion of the work. The conditions listed in «Electrical connection» must be observed before returning to service. 1.8 Unauthorised conversion and production of spare-parts Conversions or modifications to pumps are only permitted following consultation with the manufacturer. Original spare-parts and accessories authorized by the manufacturer ensure safety. The use of other components can cancel the liability for the consequences. 1.9 Improper modes of operation The operating reliability of the pumps supplied is only guaranteed when used for the intended purpose according to the section «Purpose of use» in the installation and operating instructions. The limit values specified in «Application limits» and «Technical data» must on no account be exceeded.